hw->bus.func = pci_dev->addr.function;
hw->adapter_stopped = 0;
+ /*
+ * Switch Tag value should not be identical to either the First Tag
+ * or Second Tag values. So set something other than common Ethertype
+ * for internal switching.
+ */
+ hw->switch_tag = 0xffff;
+
/* Check if need to support multi-driver */
i40e_support_multi_driver(dev);
struct rte_flow *p_flow;
int ret;
uint8_t aq_fail = 0;
+ int retries = 0;
PMD_INIT_FUNC_TRACE();
/* disable uio intr before callback unregister */
rte_intr_disable(intr_handle);
- /* register callback func to eal lib */
- rte_intr_callback_unregister(intr_handle,
- i40e_dev_interrupt_handler, dev);
+ /* unregister callback func to eal lib */
+ do {
+ ret = rte_intr_callback_unregister(intr_handle,
+ i40e_dev_interrupt_handler, dev);
+ if (ret >= 0) {
+ break;
+ } else if (ret != -EAGAIN) {
+ PMD_INIT_LOG(ERR,
+ "intr callback unregister failed: %d",
+ ret);
+ return ret;
+ }
+ i40e_msec_delay(500);
+ } while (retries++ < 5);
i40e_rm_ethtype_filter_list(pf);
i40e_rm_tunnel_filter_list(pf);
struct i40e_aq_get_phy_abilities_resp phy_ab;
struct i40e_aq_set_phy_config phy_conf;
enum i40e_aq_phy_type cnt;
+ uint8_t avail_speed;
uint32_t phy_type_mask = 0;
const uint8_t mask = I40E_AQ_PHY_FLAG_PAUSE_TX |
I40E_AQ_PHY_FLAG_PAUSE_RX |
I40E_AQ_PHY_FLAG_PAUSE_RX |
I40E_AQ_PHY_FLAG_LOW_POWER;
- const uint8_t advt = I40E_LINK_SPEED_40GB |
- I40E_LINK_SPEED_25GB |
- I40E_LINK_SPEED_10GB |
- I40E_LINK_SPEED_1GB |
- I40E_LINK_SPEED_100MB;
int ret = -ENOTSUP;
+ /* To get phy capabilities of available speeds. */
+ status = i40e_aq_get_phy_capabilities(hw, false, true, &phy_ab,
+ NULL);
+ if (status) {
+ PMD_DRV_LOG(ERR, "Failed to get PHY capabilities: %d\n",
+ status);
+ return ret;
+ }
+ avail_speed = phy_ab.link_speed;
+ /* To get the current phy config. */
status = i40e_aq_get_phy_capabilities(hw, false, false, &phy_ab,
NULL);
- if (status)
+ if (status) {
+ PMD_DRV_LOG(ERR, "Failed to get the current PHY config: %d\n",
+ status);
return ret;
+ }
- /* If link already up, no need to set up again */
- if (is_up && phy_ab.phy_type != 0)
+ /* If link needs to go up and it is in autoneg mode the speed is OK,
+ * no need to set up again.
+ */
+ if (is_up && phy_ab.phy_type != 0 &&
+ abilities & I40E_AQ_PHY_AN_ENABLED &&
+ phy_ab.link_speed != 0)
return I40E_SUCCESS;
memset(&phy_conf, 0, sizeof(phy_conf));
abilities &= ~mask;
abilities |= phy_ab.abilities & mask;
- /* update ablities and speed */
- if (abilities & I40E_AQ_PHY_AN_ENABLED)
- phy_conf.link_speed = advt;
- else
- phy_conf.link_speed = is_up ? force_speed : phy_ab.link_speed;
-
phy_conf.abilities = abilities;
+ /* If link needs to go up, but the force speed is not supported,
+ * Warn users and config the default available speeds.
+ */
+ if (is_up && !(force_speed & avail_speed)) {
+ PMD_DRV_LOG(WARNING, "Invalid speed setting, set to default!\n");
+ phy_conf.link_speed = avail_speed;
+ } else {
+ phy_conf.link_speed = is_up ? force_speed : avail_speed;
+ }
-
- /* To enable link, phy_type mask needs to include each type */
- for (cnt = I40E_PHY_TYPE_SGMII; cnt < I40E_PHY_TYPE_MAX; cnt++)
+ /* PHY type mask needs to include each type except PHY type extension */
+ for (cnt = I40E_PHY_TYPE_SGMII; cnt < I40E_PHY_TYPE_25GBASE_KR; cnt++)
phy_type_mask |= 1 << cnt;
/* use get_phy_abilities_resp value for the rest */
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct rte_eth_conf *conf = &dev->data->dev_conf;
+ if (conf->link_speeds == ETH_LINK_SPEED_AUTONEG) {
+ conf->link_speeds = ETH_LINK_SPEED_40G |
+ ETH_LINK_SPEED_25G |
+ ETH_LINK_SPEED_20G |
+ ETH_LINK_SPEED_10G |
+ ETH_LINK_SPEED_1G |
+ ETH_LINK_SPEED_100M;
+ }
speed = i40e_parse_link_speeds(conf->link_speeds);
- abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
- if (!(conf->link_speeds & ETH_LINK_SPEED_FIXED))
- abilities |= I40E_AQ_PHY_AN_ENABLED;
- abilities |= I40E_AQ_PHY_LINK_ENABLED;
+ abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK |
+ I40E_AQ_PHY_AN_ENABLED |
+ I40E_AQ_PHY_LINK_ENABLED;
return i40e_phy_conf_link(hw, abilities, speed, true);
}
}
/* Apply link configure */
- if (dev->data->dev_conf.link_speeds & ~(ETH_LINK_SPEED_100M |
- ETH_LINK_SPEED_1G | ETH_LINK_SPEED_10G |
- ETH_LINK_SPEED_20G | ETH_LINK_SPEED_25G |
- ETH_LINK_SPEED_40G)) {
- PMD_DRV_LOG(ERR, "Invalid link setting");
- goto err_up;
- }
ret = i40e_apply_link_speed(dev);
if (I40E_SUCCESS != ret) {
PMD_DRV_LOG(ERR, "Fail to apply link setting");
i40e_pf_disable_irq0(hw);
rte_intr_disable(intr_handle);
+ i40e_fdir_teardown(pf);
+
/* shutdown and destroy the HMC */
i40e_shutdown_lan_hmc(hw);
pf->vmdq = NULL;
/* release all the existing VSIs and VEBs */
- i40e_fdir_teardown(pf);
i40e_vsi_release(pf->main_vsi);
/* shutdown the adminq */
return i40e_phy_conf_link(hw, abilities, speed, false);
}
-int
-i40e_dev_link_update(struct rte_eth_dev *dev,
- int wait_to_complete)
+static __rte_always_inline void
+update_link_no_wait(struct i40e_hw *hw, struct rte_eth_link *link)
+{
+/* Link status registers and values*/
+#define I40E_PRTMAC_LINKSTA 0x001E2420
+#define I40E_REG_LINK_UP 0x40000080
+#define I40E_PRTMAC_MACC 0x001E24E0
+#define I40E_REG_MACC_25GB 0x00020000
+#define I40E_REG_SPEED_MASK 0x38000000
+#define I40E_REG_SPEED_100MB 0x00000000
+#define I40E_REG_SPEED_1GB 0x08000000
+#define I40E_REG_SPEED_10GB 0x10000000
+#define I40E_REG_SPEED_20GB 0x20000000
+#define I40E_REG_SPEED_25_40GB 0x18000000
+ uint32_t link_speed;
+ uint32_t reg_val;
+
+ reg_val = I40E_READ_REG(hw, I40E_PRTMAC_LINKSTA);
+ link_speed = reg_val & I40E_REG_SPEED_MASK;
+ reg_val &= I40E_REG_LINK_UP;
+ link->link_status = (reg_val == I40E_REG_LINK_UP) ? 1 : 0;
+
+ if (unlikely(link->link_status == 0))
+ return;
+
+ /* Parse the link status */
+ switch (link_speed) {
+ case I40E_REG_SPEED_100MB:
+ link->link_speed = ETH_SPEED_NUM_100M;
+ break;
+ case I40E_REG_SPEED_1GB:
+ link->link_speed = ETH_SPEED_NUM_1G;
+ break;
+ case I40E_REG_SPEED_10GB:
+ link->link_speed = ETH_SPEED_NUM_10G;
+ break;
+ case I40E_REG_SPEED_20GB:
+ link->link_speed = ETH_SPEED_NUM_20G;
+ break;
+ case I40E_REG_SPEED_25_40GB:
+ reg_val = I40E_READ_REG(hw, I40E_PRTMAC_MACC);
+
+ if (reg_val & I40E_REG_MACC_25GB)
+ link->link_speed = ETH_SPEED_NUM_25G;
+ else
+ link->link_speed = ETH_SPEED_NUM_40G;
+
+ break;
+ default:
+ PMD_DRV_LOG(ERR, "Unknown link speed info %u", link_speed);
+ break;
+ }
+}
+
+static __rte_always_inline void
+update_link_wait(struct i40e_hw *hw, struct rte_eth_link *link,
+ bool enable_lse)
{
-#define CHECK_INTERVAL 100 /* 100ms */
-#define MAX_REPEAT_TIME 10 /* 1s (10 * 100ms) in total */
- struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+#define CHECK_INTERVAL 100 /* 100ms */
+#define MAX_REPEAT_TIME 10 /* 1s (10 * 100ms) in total */
+ uint32_t rep_cnt = MAX_REPEAT_TIME;
struct i40e_link_status link_status;
- struct rte_eth_link link, old;
int status;
- unsigned rep_cnt = MAX_REPEAT_TIME;
- bool enable_lse = dev->data->dev_conf.intr_conf.lsc ? true : false;
- memset(&link, 0, sizeof(link));
- memset(&old, 0, sizeof(old));
memset(&link_status, 0, sizeof(link_status));
- rte_i40e_dev_atomic_read_link_status(dev, &old);
do {
/* Get link status information from hardware */
status = i40e_aq_get_link_info(hw, enable_lse,
&link_status, NULL);
- if (status != I40E_SUCCESS) {
- link.link_speed = ETH_SPEED_NUM_100M;
- link.link_duplex = ETH_LINK_FULL_DUPLEX;
+ if (unlikely(status != I40E_SUCCESS)) {
+ link->link_speed = ETH_SPEED_NUM_100M;
+ link->link_duplex = ETH_LINK_FULL_DUPLEX;
PMD_DRV_LOG(ERR, "Failed to get link info");
- goto out;
+ return;
}
- link.link_status = link_status.link_info & I40E_AQ_LINK_UP;
- if (!wait_to_complete || link.link_status)
+ link->link_status = link_status.link_info & I40E_AQ_LINK_UP;
+ if (unlikely(link->link_status != 0))
break;
rte_delay_ms(CHECK_INTERVAL);
} while (--rep_cnt);
- if (!link.link_status)
- goto out;
-
- /* i40e uses full duplex only */
- link.link_duplex = ETH_LINK_FULL_DUPLEX;
-
/* Parse the link status */
switch (link_status.link_speed) {
case I40E_LINK_SPEED_100MB:
- link.link_speed = ETH_SPEED_NUM_100M;
+ link->link_speed = ETH_SPEED_NUM_100M;
break;
case I40E_LINK_SPEED_1GB:
- link.link_speed = ETH_SPEED_NUM_1G;
+ link->link_speed = ETH_SPEED_NUM_1G;
break;
case I40E_LINK_SPEED_10GB:
- link.link_speed = ETH_SPEED_NUM_10G;
+ link->link_speed = ETH_SPEED_NUM_10G;
break;
case I40E_LINK_SPEED_20GB:
- link.link_speed = ETH_SPEED_NUM_20G;
+ link->link_speed = ETH_SPEED_NUM_20G;
break;
case I40E_LINK_SPEED_25GB:
- link.link_speed = ETH_SPEED_NUM_25G;
+ link->link_speed = ETH_SPEED_NUM_25G;
break;
case I40E_LINK_SPEED_40GB:
- link.link_speed = ETH_SPEED_NUM_40G;
+ link->link_speed = ETH_SPEED_NUM_40G;
break;
default:
- link.link_speed = ETH_SPEED_NUM_100M;
+ link->link_speed = ETH_SPEED_NUM_100M;
break;
}
+}
+
+int
+i40e_dev_link_update(struct rte_eth_dev *dev,
+ int wait_to_complete)
+{
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct rte_eth_link link, old;
+ bool enable_lse = dev->data->dev_conf.intr_conf.lsc ? true : false;
+
+ memset(&link, 0, sizeof(link));
+ memset(&old, 0, sizeof(old));
+
+ rte_i40e_dev_atomic_read_link_status(dev, &old);
+ /* i40e uses full duplex only */
+ link.link_duplex = ETH_LINK_FULL_DUPLEX;
link.link_autoneg = !(dev->data->dev_conf.link_speeds &
ETH_LINK_SPEED_FIXED);
-out:
+ if (!wait_to_complete)
+ update_link_no_wait(hw, &link);
+ else
+ update_link_wait(hw, &link, enable_lse);
+
rte_i40e_dev_atomic_write_link_status(dev, &link);
if (link.link_status == old.link_status)
return -1;
#define I40E_GL_SWR_PM_UP_THR_SF_VALUE 0x06060606
#define I40E_GL_SWR_PM_UP_THR 0x269FBC
+/*
+ * GL_SWR_PM_UP_THR:
+ * The value is not impacted from the link speed, its value is set according
+ * to the total number of ports for a better pipe-monitor configuration.
+ */
+static bool
+i40e_get_swr_pm_cfg(struct i40e_hw *hw, uint32_t *value)
+{
+#define I40E_GL_SWR_PM_EF_DEVICE(dev) \
+ .device_id = (dev), \
+ .val = I40E_GL_SWR_PM_UP_THR_EF_VALUE
+
+#define I40E_GL_SWR_PM_SF_DEVICE(dev) \
+ .device_id = (dev), \
+ .val = I40E_GL_SWR_PM_UP_THR_SF_VALUE
+
+ static const struct {
+ uint16_t device_id;
+ uint32_t val;
+ } swr_pm_table[] = {
+ { I40E_GL_SWR_PM_EF_DEVICE(I40E_DEV_ID_SFP_XL710) },
+ { I40E_GL_SWR_PM_EF_DEVICE(I40E_DEV_ID_KX_C) },
+ { I40E_GL_SWR_PM_EF_DEVICE(I40E_DEV_ID_10G_BASE_T) },
+ { I40E_GL_SWR_PM_EF_DEVICE(I40E_DEV_ID_10G_BASE_T4) },
+
+ { I40E_GL_SWR_PM_SF_DEVICE(I40E_DEV_ID_KX_B) },
+ { I40E_GL_SWR_PM_SF_DEVICE(I40E_DEV_ID_QSFP_A) },
+ { I40E_GL_SWR_PM_SF_DEVICE(I40E_DEV_ID_QSFP_B) },
+ { I40E_GL_SWR_PM_SF_DEVICE(I40E_DEV_ID_20G_KR2) },
+ { I40E_GL_SWR_PM_SF_DEVICE(I40E_DEV_ID_20G_KR2_A) },
+ { I40E_GL_SWR_PM_SF_DEVICE(I40E_DEV_ID_25G_B) },
+ { I40E_GL_SWR_PM_SF_DEVICE(I40E_DEV_ID_25G_SFP28) },
+ };
+ uint32_t i;
+
+ if (value == NULL) {
+ PMD_DRV_LOG(ERR, "value is NULL");
+ return false;
+ }
+
+ for (i = 0; i < RTE_DIM(swr_pm_table); i++) {
+ if (hw->device_id == swr_pm_table[i].device_id) {
+ *value = swr_pm_table[i].val;
+
+ PMD_DRV_LOG(DEBUG, "Device 0x%x with GL_SWR_PM_UP_THR "
+ "value - 0x%08x",
+ hw->device_id, *value);
+ return true;
+ }
+ }
+
+ return false;
+}
+
static int
i40e_dev_sync_phy_type(struct i40e_hw *hw)
{
}
if (reg_table[i].addr == I40E_GL_SWR_PM_UP_THR) {
- if (I40E_PHY_TYPE_SUPPORT_40G(hw->phy.phy_types) || /* For XL710 */
- I40E_PHY_TYPE_SUPPORT_25G(hw->phy.phy_types)) /* For XXV710 */
- reg_table[i].val =
- I40E_GL_SWR_PM_UP_THR_SF_VALUE;
- else /* For X710 */
- reg_table[i].val =
- I40E_GL_SWR_PM_UP_THR_EF_VALUE;
+ uint32_t cfg_val;
+
+ if (!i40e_get_swr_pm_cfg(hw, &cfg_val)) {
+ PMD_DRV_LOG(DEBUG, "Device 0x%x skips "
+ "GL_SWR_PM_UP_THR value fixup",
+ hw->device_id);
+ continue;
+ }
+
+ reg_table[i].val = cfg_val;
}
ret = i40e_aq_debug_read_register(hw, reg_table[i].addr,
static int
i40e_update_customized_pctype(struct rte_eth_dev *dev, uint8_t *pkg,
uint32_t pkg_size, uint32_t proto_num,
- struct rte_pmd_i40e_proto_info *proto)
+ struct rte_pmd_i40e_proto_info *proto,
+ enum rte_pmd_i40e_package_op op)
{
struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
uint32_t pctype_num;
uint32_t i, j, n;
int ret;
+ if (op != RTE_PMD_I40E_PKG_OP_WR_ADD &&
+ op != RTE_PMD_I40E_PKG_OP_WR_DEL) {
+ PMD_DRV_LOG(ERR, "Unsupported operation.");
+ return -1;
+ }
+
ret = rte_pmd_i40e_get_ddp_info(pkg, pkg_size,
(uint8_t *)&pctype_num, sizeof(pctype_num),
RTE_PMD_I40E_PKG_INFO_PCTYPE_NUM);
i40e_find_customized_pctype(pf,
I40E_CUSTOMIZED_GTPU);
if (new_pctype) {
- new_pctype->pctype = pctype_value;
- new_pctype->valid = true;
+ if (op == RTE_PMD_I40E_PKG_OP_WR_ADD) {
+ new_pctype->pctype = pctype_value;
+ new_pctype->valid = true;
+ } else {
+ new_pctype->pctype = I40E_FILTER_PCTYPE_INVALID;
+ new_pctype->valid = false;
+ }
}
}
static int
i40e_update_customized_ptype(struct rte_eth_dev *dev, uint8_t *pkg,
- uint32_t pkg_size, uint32_t proto_num,
- struct rte_pmd_i40e_proto_info *proto)
+ uint32_t pkg_size, uint32_t proto_num,
+ struct rte_pmd_i40e_proto_info *proto,
+ enum rte_pmd_i40e_package_op op)
{
struct rte_pmd_i40e_ptype_mapping *ptype_mapping;
uint16_t port_id = dev->data->port_id;
bool inner_ip;
int ret;
+ if (op != RTE_PMD_I40E_PKG_OP_WR_ADD &&
+ op != RTE_PMD_I40E_PKG_OP_WR_DEL) {
+ PMD_DRV_LOG(ERR, "Unsupported operation.");
+ return -1;
+ }
+
+ if (op == RTE_PMD_I40E_PKG_OP_WR_DEL) {
+ rte_pmd_i40e_ptype_mapping_reset(port_id);
+ return 0;
+ }
+
/* get information about new ptype num */
ret = rte_pmd_i40e_get_ddp_info(pkg, pkg_size,
(uint8_t *)&ptype_num, sizeof(ptype_num),
void
i40e_update_customized_info(struct rte_eth_dev *dev, uint8_t *pkg,
- uint32_t pkg_size)
+ uint32_t pkg_size, enum rte_pmd_i40e_package_op op)
{
struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
uint32_t proto_num;
uint32_t i;
int ret;
+ if (op != RTE_PMD_I40E_PKG_OP_WR_ADD &&
+ op != RTE_PMD_I40E_PKG_OP_WR_DEL) {
+ PMD_DRV_LOG(ERR, "Unsupported operation.");
+ return;
+ }
+
/* get information about protocol number */
ret = rte_pmd_i40e_get_ddp_info(pkg, pkg_size,
(uint8_t *)&proto_num, sizeof(proto_num),
/* Check if GTP is supported. */
for (i = 0; i < proto_num; i++) {
if (!strncmp(proto[i].name, "GTP", 3)) {
- pf->gtp_support = true;
+ if (op == RTE_PMD_I40E_PKG_OP_WR_ADD)
+ pf->gtp_support = true;
+ else
+ pf->gtp_support = false;
break;
}
}
/* Update customized pctype info */
ret = i40e_update_customized_pctype(dev, pkg, pkg_size,
- proto_num, proto);
+ proto_num, proto, op);
if (ret)
PMD_DRV_LOG(INFO, "No pctype is updated.");
/* Update customized ptype info */
ret = i40e_update_customized_ptype(dev, pkg, pkg_size,
- proto_num, proto);
+ proto_num, proto, op);
if (ret)
PMD_DRV_LOG(INFO, "No ptype is updated.");
Code Review / deb_dpdk.git / blobdiff