Imported Upstream version 16.07

Change-Id: I8bf3b1fc950b92eb78860f8bc8dd675e06e85e48
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>

diff --git a/MAINTAINERS b/MAINTAINERS
index d099131..6536c6b 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -373,7 +373,7 @@ F: drivers/net/vmxnet3/
 F: doc/guides/nics/vmxnet3.rst
 
 Vhost PMD
 F: doc/guides/nics/vmxnet3.rst
 
 Vhost PMD

-M: Tetsuya Mukawa <mukawa@igel.co.jp>
+M: Tetsuya Mukawa <mtetsuyah@gmail.com>

 M: Yuanhan Liu <yuanhan.liu@linux.intel.com>
 T: git://dpdk.org/next/dpdk-next-virtio
 F: drivers/net/vhost/
 M: Yuanhan Liu <yuanhan.liu@linux.intel.com>
 T: git://dpdk.org/next/dpdk-next-virtio
 F: drivers/net/vhost/


@@ -392,7 +392,7 @@ F: app/test/test_pmd_ring.c
 F: app/test/test_pmd_ring_perf.c
 
 Null Networking PMD
 F: app/test/test_pmd_ring_perf.c
 
 Null Networking PMD

-M: Tetsuya Mukawa <mukawa@igel.co.jp>
+M: Tetsuya Mukawa <mtetsuyah@gmail.com>

 F: drivers/net/null/
 
 
 F: drivers/net/null/
 
 

diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 063c4a5..5c10cd3 100644 (file)
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -154,6 +154,11 @@ Run-time configuration
   allows to save PCI bandwidth and improve performance at the cost of a
   slightly higher CPU usage.  Enabled by default.
 
   allows to save PCI bandwidth and improve performance at the cost of a
   slightly higher CPU usage.  Enabled by default.
 

+  Supported on:
+
+  - x86_64 with ConnectX4 and ConnectX4 LX
+  - Power8 with ConnectX4 LX
+

 - ``txq_inline`` parameter [int]
 
   Amount of data to be inlined during TX operations. Improves latency.
 - ``txq_inline`` parameter [int]
 
   Amount of data to be inlined during TX operations. Improves latency.


@@ -234,7 +239,7 @@ DPDK and must be installed separately:
 
 Currently supported by DPDK:
 
 
 Currently supported by DPDK:
 

-- Mellanox OFED **3.3-1.0.0.0**.
+- Mellanox OFED **3.3-1.0.0.0** and **3.3-2.0.0.0**.

 
 - Minimum firmware version:
 
 
 - Minimum firmware version:
 

diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst
index f502f86..d2dc4a9 100644 (file)
--- a/doc/guides/rel_notes/deprecation.rst
+++ b/doc/guides/rel_notes/deprecation.rst
@@ -11,6 +11,16 @@ Deprecation Notices
 * The log history is deprecated.
   It is voided in 16.07 and will be removed in release 16.11.
 
 * The log history is deprecated.
   It is voided in 16.07 and will be removed in release 16.11.
 

+* The ethdev library file will be renamed from libethdev.* to librte_ethdev.*
+  in release 16.11 in order to have a more consistent namespace.
+
+* In 16.11 ABI changes are planned: the ``rte_eth_dev`` structure will be
+  extended with new function pointer ``tx_pkt_prep`` allowing verification
+  and processing of packet burst to meet HW specific requirements before
+  transmit. Also new fields will be added to the ``rte_eth_desc_lim`` structure:
+  ``nb_seg_max`` and ``nb_mtu_seg_max`` providing information about number of
+  segments limit to be transmitted by device for TSO/non-TSO packets.
+

 * The ethdev hotplug API is going to be moved to EAL with a notification
   mechanism added to crypto and ethdev libraries so that hotplug is now
   available to both of them. This API will be stripped of the device arguments
 * The ethdev hotplug API is going to be moved to EAL with a notification
   mechanism added to crypto and ethdev libraries so that hotplug is now
   available to both of them. This API will be stripped of the device arguments


@@ -23,9 +33,11 @@ Deprecation Notices
   do not need to care about the kind of devices that are being used, making it
   easier to add new buses later.
 
   do not need to care about the kind of devices that are being used, making it
   easier to add new buses later.
 

-* ABI changes are planned for adding four new flow types. This impacts
-  RTE_ETH_FLOW_MAX. The release 2.2 does not contain these ABI changes,
-  but release 2.3 will. [postponed]
+* ABI changes are planned for 16.11 in the ``rte_mbuf`` structure: some fields
+  may be reordered to facilitate the writing of ``data_off``, ``refcnt``, and
+  ``nb_segs`` in one operation, because some platforms have an overhead if the
+  store address is not naturally aligned. Other mbuf fields, such as the
+  ``port`` field, may be moved or removed as part of this mbuf work.

 
 * The mbuf flags PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated and
   are respectively replaced by PKT_RX_VLAN_STRIPPED and
 
 * The mbuf flags PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated and
   are respectively replaced by PKT_RX_VLAN_STRIPPED and


@@ -41,3 +53,19 @@ Deprecation Notices
 * The mempool functions for single/multi producer/consumer are deprecated and
   will be removed in 16.11.
   It is replaced by rte_mempool_generic_get/put functions.
 * The mempool functions for single/multi producer/consumer are deprecated and
   will be removed in 16.11.
   It is replaced by rte_mempool_generic_get/put functions.

+
+* The ``rte_ivshmem`` feature (including library and EAL code) will be removed
+  in 16.11 because it has some design issues which are not planned to be fixed.
+
+* The vhost-cuse will be removed in 16.11. Since v2.1, a large majority of
+  development effort has gone to vhost-user, such as multiple-queue, live
+  migration, reconnect etc. Therefore, vhost-user should be used instead.
+
+* Driver names are quite inconsistent among each others and they will be
+  renamed to something more consistent (net and crypto prefixes) in 16.11.
+  Some of these driver names are used publicly, to create virtual devices,
+  so a deprecation notice is necessary.
+
+* API will change for ``rte_port_source_params`` and ``rte_port_sink_params``
+  structures. The member ``file_name`` data type will be changed from
+  ``char *`` to ``const char *``. This change targets release 16.11.

diff --git a/doc/guides/rel_notes/known_issues.rst b/doc/guides/rel_notes/known_issues.rst
index 5ec1987..3cd4237 100644 (file)
--- a/doc/guides/rel_notes/known_issues.rst
+++ b/doc/guides/rel_notes/known_issues.rst
@@ -620,3 +620,23 @@ The last EAL argument is replaced by the program name in argv[]
 
 **Driver/Module**:
    Environment Abstraction Layer (EAL).
 
 **Driver/Module**:
    Environment Abstraction Layer (EAL).

+
+
+I40e VF may not receive packets in the promiscuous mode
+-------------------------------------------------------
+
+**Description**:
+   Promiscuous mode is not supported by the DPDK i40e VF driver when using the
+   i40e Linux kernel driver as host driver.
+
+**Implication**:
+   The i40e VF does not receive packets when the destination MAC address is unknown.
+
+**Resolution/Workaround**:
+   Use a explicit destination MAC address that matches the VF.
+
+**Affected Environment/Platform**:
+   All.
+
+**Driver/Module**:
+   Poll Mode Driver (PMD).

diff --git a/doc/guides/rel_notes/release_16_07.rst b/doc/guides/rel_notes/release_16_07.rst
index d00a6ed..a8a3fc1 100644 (file)
--- a/doc/guides/rel_notes/release_16_07.rst
+++ b/doc/guides/rel_notes/release_16_07.rst
@@ -34,32 +34,36 @@ New Features
 
      Refer to the previous release notes for examples.
 
 
      Refer to the previous release notes for examples.
 

-* **Removed mempool cache if not needed.**
+* **Removed the mempool cache memory if caching is not being used.**

 
   The size of the mempool structure is reduced if the per-lcore cache is disabled.
 
 * **Added mempool external cache for non-EAL thread.**
 
   Added new functions to create, free or flush a user-owned mempool
 
   The size of the mempool structure is reduced if the per-lcore cache is disabled.
 
 * **Added mempool external cache for non-EAL thread.**
 
   Added new functions to create, free or flush a user-owned mempool

-  cache for non-EAL threads. Previously the cache was always disabled
+  cache for non-EAL threads. Previously the caching was always disabled

   on these threads.
 
   on these threads.
 

-* **Changed the memory allocation in mempool library.**
+* **Changed the memory allocation scheme in the mempool library.**

 
 

-  * Added ability to allocate a large mempool in virtually fragmented memory.
+  * Added the ability to allocate a large mempool in fragmented virtual memory.

   * Added new APIs to populate a mempool with memory.
   * Added an API to free a mempool.
   * Modified the API of the ``rte_mempool_obj_iter()`` function.
   * Added new APIs to populate a mempool with memory.
   * Added an API to free a mempool.
   * Modified the API of the ``rte_mempool_obj_iter()`` function.

-  * Dropped specific Xen Dom0 code.
-  * Dropped specific anonymous mempool code in testpmd.
+  * Dropped the specific Xen Dom0 code.
+  * Dropped the specific anonymous mempool code in testpmd.

 
 

-* **Added new driver for Broadcom NetXtreme-C devices.**
+* **Added a new driver for Broadcom NetXtreme-C devices.**

 
   Added the new bnxt driver for Broadcom NetXtreme-C devices. See the
   "Network Interface Controller Drivers" document for more details on this
   new driver.
 
 
   Added the new bnxt driver for Broadcom NetXtreme-C devices. See the
   "Network Interface Controller Drivers" document for more details on this
   new driver.
 

-* **Added new driver for ThunderX nicvf device.**
+* **Added a new driver for ThunderX nicvf devices.**
+
+  Added the new thunderx net driver for ThunderX nicvf devices. See the
+  "Network Interface Controller Drivers" document for more details on this new
+  driver.

 
 * **Added mailbox interrupt support for ixgbe and igb VFs.**
 
 
 * **Added mailbox interrupt support for ixgbe and igb VFs.**
 


@@ -94,6 +98,21 @@ New Features
   * Added MTU update in non Scattered Rx mode and enabled MTU of up to 9208
     with UCS Software release 2.2 on 1300 series VICs.
 
   * Added MTU update in non Scattered Rx mode and enabled MTU of up to 9208
     with UCS Software release 2.2 on 1300 series VICs.
 

+* **Updated the mlx5 driver.**
+
+  The mlx5 driver was updated with changes including the following:
+
+  * Data path was refactored to bypass Verbs to improve RX and TX performance.
+  * Removed compilation parameters for inline send, ``MLX5_MAX_INLINE``, and
+    added command line parameter instead, ``txq_inline``.
+  * Improved TX scatter gather support:
+    Removed compilation parameter ``MLX5_PMD_SGE_WR_N``.
+    Scatter-gather elements is set to the maximum value the NIC supports.
+    Removed linearization logic, this decreases the memory consumption of the PMD.
+  * Improved jumbo frames support, by dynamically setting RX scatter gather elements
+    according to the MTU and mbuf size,
+    no need for compilation parameter ``MLX5_PMD_SGE_WR_N``
+

 * **Added support for virtio on IBM POWER8.**
 
   The ioports are mapped in memory when using Linux UIO.
 * **Added support for virtio on IBM POWER8.**
 
   The ioports are mapped in memory when using Linux UIO.


@@ -123,8 +142,8 @@ New Features
 
   DPDK vhost-user will also try to reconnect by default when:
 
 
   DPDK vhost-user will also try to reconnect by default when:
 

-  * The first connect fails (when QEMU is not started yet).
-  * The connection is broken (when QEMU restarts).
+  * The first connect fails (for example when QEMU is not started yet).
+  * The connection is broken (for example when QEMU restarts).

 
   It can be turned off by setting the ``RTE_VHOST_USER_NO_RECONNECT`` flag.
 
 
   It can be turned off by setting the ``RTE_VHOST_USER_NO_RECONNECT`` flag.
 


@@ -135,7 +154,7 @@ New Features
   Now AESNI MB PMD supports 128/192/256-bit counter mode AES encryption and
   decryption.
 
   Now AESNI MB PMD supports 128/192/256-bit counter mode AES encryption and
   decryption.
 

-* **Added support for AES counter mode with Intel QuickAssist devices.**
+* **Added AES counter mode support for Intel QuickAssist devices.**

 
   Enabled support for the AES CTR algorithm for Intel QuickAssist devices.
   Provided support for algorithm-chaining operations.
 
   Enabled support for the AES CTR algorithm for Intel QuickAssist devices.
   Provided support for algorithm-chaining operations.


@@ -168,7 +187,7 @@ New Features
 
 * **Added keepalive enhancements.**
 
 
 * **Added keepalive enhancements.**
 

-  Added support for reporting of core states other than dead to
+  Added support for reporting of core states other than "dead" to

   monitoring applications, enabling the support of broader liveness
   reporting to external processes.
 
   monitoring applications, enabling the support of broader liveness
   reporting to external processes.
 


@@ -400,6 +419,52 @@ Tested Platforms
       - Platform details.
       - Platform details.
 
       - Platform details.
       - Platform details.
 

+#. SuperMicro 1U
+
+   - BIOS: 1.0c
+   - Processor: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz
+
+#. SuperMicro 1U
+
+   - BIOS: 1.0a
+   - Processor: Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz
+   - Onboard NIC: Intel(R) X552/X557-AT (2x10G)
+
+     - Firmware-version: 0x800001cf
+     - Device ID (PF/VF): 8086:15ad /8086:15a8
+
+   - kernel driver version: 4.2.5 (ixgbe)
+
+#. SuperMicro 2U
+
+   - BIOS: 1.0a
+   - Processor: Intel(R) Xeon(R) CPU E5-4667 v3 @ 2.00GHz
+
+#. Intel(R) Server board S2600GZ
+
+   - BIOS: SE5C600.86B.02.02.0002.122320131210
+   - Processor: Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
+
+#. Intel(R) Server board W2600CR
+
+   - BIOS: SE5C600.86B.02.01.0002.082220131453
+   - Processor: Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
+
+#. Intel(R) Server board S2600CWT
+
+   - BIOS: SE5C610.86B.01.01.0009.060120151350
+   - Processor: Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz
+
+#. Intel(R) Server board S2600WTT
+
+   - BIOS: SE5C610.86B.01.01.0005.101720141054
+   - Processor: Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz
+
+#. Intel(R) Server board S2600WTT
+
+   - BIOS: SE5C610.86B.11.01.0044.090120151156
+   - Processor: Intel(R) Xeon(R) CPU E5-2695 v4 @ 2.10GHz
+

 
 Tested NICs
 -----------
 
 Tested NICs
 -----------


@@ -412,3 +477,74 @@ Tested NICs
 
       - NIC details.
       - NIC details.
 
       - NIC details.
       - NIC details.

+
+#. Intel(R) Ethernet Controller X540-AT2
+
+   - Firmware version: 0x80000389
+   - Device id (pf): 8086:1528
+   - Driver version: 3.23.2 (ixgbe)
+
+#. Intel(R) 82599ES 10 Gigabit Ethernet Controller
+
+   - Firmware version: 0x61bf0001
+   - Device id (pf/vf): 8086:10fb / 8086:10ed
+   - Driver version: 4.0.1-k (ixgbe)
+
+#. Intel(R) Corporation Ethernet Connection X552/X557-AT 10GBASE-T
+
+   - Firmware version: 0x800001cf
+   - Device id (pf/vf): 8086:15ad / 8086:15a8
+   - Driver version: 4.2.5 (ixgbe)
+
+#. Intel(R) Ethernet Converged Network Adapter X710-DA4 (4x10G)
+
+   - Firmware version: 5.04
+   - Device id (pf/vf): 8086:1572 / 8086:154c
+   - Driver version: 1.4.26 (i40e)
+
+#. Intel(R) Ethernet Converged Network Adapter X710-DA2 (2x10G)
+
+   - Firmware version: 5.04
+   - Device id (pf/vf): 8086:1572 / 8086:154c
+   - Driver version: 1.4.25 (i40e)
+
+#. Intel(R) Ethernet Converged Network Adapter XL710-QDA1 (1x40G)
+
+   - Firmware version: 5.04
+   - Device id (pf/vf): 8086:1584 / 8086:154c
+   - Driver version: 1.4.25 (i40e)
+
+#. Intel(R) Ethernet Converged Network Adapter XL710-QDA2 (2X40G)
+
+   - Firmware version: 5.04
+   - Device id (pf/vf): 8086:1583 / 8086:154c
+   - Driver version: 1.4.25 (i40e)
+
+#. Intel(R) Corporation I350 Gigabit Network Connection
+
+   - Firmware version: 1.48, 0x800006e7
+   - Device id (pf/vf): 8086:1521 / 8086:1520
+   - Driver version: 5.2.13-k (igb)
+
+#. Intel(R) Ethernet Multi-host Controller FM10000
+
+   - Firmware version: N/A
+   - Device id (pf/vf): 8086:15d0
+   - Driver version: 0.17.0.9 (fm10k)
+
+
+Tested OSes
+-----------
+
+.. This section should contain a list of OSes that were tested with this release.
+
+- CentOS 7.0
+- Fedora 23
+- Fedora 24
+- FreeBSD 10.3
+- Red Hat Enterprise Linux 7.2
+- SUSE Enterprise Linux 12
+- Ubuntu 15.10
+- Ubuntu 16.04 LTS
+- Wind River Linux 8
+

diff --git a/doc/guides/testpmd_app_ug/build_app.rst b/doc/guides/testpmd_app_ug/build_app.rst
index 7f32a7c..4c7cf2e 100644 (file)
--- a/doc/guides/testpmd_app_ug/build_app.rst
+++ b/doc/guides/testpmd_app_ug/build_app.rst
@@ -58,4 +58,4 @@ The basic compilation steps are:
 
     .. code-block:: console
 
 
     .. code-block:: console
 

-        $RTE_SDK/$RTE_TARGET/build/app/testpmd
+        $RTE_SDK/$RTE_TARGET/app/testpmd

diff --git a/drivers/net/i40e/i40e_rxtx.c b/drivers/net/i40e/i40e_rxtx.c
index d3cfb98..554d167 100644 (file)
--- a/drivers/net/i40e/i40e_rxtx.c
+++ b/drivers/net/i40e/i40e_rxtx.c
@@ -1436,10 +1436,10 @@ i40e_recv_scattered_pkts(void *rx_queue,
                        i40e_rxd_pkt_type_mapping((uint8_t)((qword1 &
                        I40E_RXD_QW1_PTYPE_MASK) >> I40E_RXD_QW1_PTYPE_SHIFT));
                if (pkt_flags & PKT_RX_RSS_HASH)
                        i40e_rxd_pkt_type_mapping((uint8_t)((qword1 &
                        I40E_RXD_QW1_PTYPE_MASK) >> I40E_RXD_QW1_PTYPE_SHIFT));
                if (pkt_flags & PKT_RX_RSS_HASH)

-                       rxm->hash.rss =
+                       first_seg->hash.rss =

                                rte_le_to_cpu_32(rxd.wb.qword0.hi_dword.rss);
                if (pkt_flags & PKT_RX_FDIR)
                                rte_le_to_cpu_32(rxd.wb.qword0.hi_dword.rss);
                if (pkt_flags & PKT_RX_FDIR)

-                       pkt_flags |= i40e_rxd_build_fdir(&rxd, rxm);
+                       pkt_flags |= i40e_rxd_build_fdir(&rxd, first_seg);

 
 #ifdef RTE_LIBRTE_IEEE1588
                pkt_flags |= i40e_get_iee15888_flags(first_seg, qword1);
 
 #ifdef RTE_LIBRTE_IEEE1588
                pkt_flags |= i40e_get_iee15888_flags(first_seg, qword1);

diff --git a/examples/ip_pipeline/config/flow.cfg b/examples/ip_pipeline/config/flow.cfg
index 6895d39..cec990a 100644 (file)
--- a/examples/ip_pipeline/config/flow.cfg
+++ b/examples/ip_pipeline/config/flow.cfg
@@ -64,8 +64,8 @@ pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
 pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK0
 n_flows = 65536
 ;key_size = 8                ; QinQ key size
 pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK0
 n_flows = 65536
 ;key_size = 8                ; QinQ key size

-;key_offset = 270            ; QinQ key offset
-;key_mask = 0000FFF00000FFF0 ; QinQ key mask
+;key_offset = 268            ; QinQ key offset
+;key_mask = 00000FFF00000FFF ; QinQ key mask

 key_size = 16                               ; IPv4 5-tuple key size
 key_offset = 278                            ; IPv4 5-tuple key offset
 key_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF ; IPv4 5-tuple key mask
 key_size = 16                               ; IPv4 5-tuple key size
 key_offset = 278                            ; IPv4 5-tuple key offset
 key_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF ; IPv4 5-tuple key mask

diff --git a/lib/librte_eal/common/eal_common_options.c b/lib/librte_eal/common/eal_common_options.c
index 481c732..1a1bab3 100644 (file)
--- a/lib/librte_eal/common/eal_common_options.c
+++ b/lib/librte_eal/common/eal_common_options.c
@@ -530,6 +530,13 @@ eal_parse_set(const char *input, uint16_t set[], unsigned num)
                str = end + 1;
        } while (*end != '\0' && *end != ')');
 
                str = end + 1;
        } while (*end != '\0' && *end != ')');
 

+       /*
+        * to avoid failure that tail blank makes end character check fail
+        * in eal_parse_lcores( )
+        */
+       while (isblank(*str))
+               str++;
+

        return str - input;
 }
 
        return str - input;
 }
 


@@ -578,13 +585,12 @@ eal_parse_lcores(const char *lcores)
        struct rte_config *cfg = rte_eal_get_configuration();
        static uint16_t set[RTE_MAX_LCORE];
        unsigned idx = 0;
        struct rte_config *cfg = rte_eal_get_configuration();
        static uint16_t set[RTE_MAX_LCORE];
        unsigned idx = 0;

-       int i;

        unsigned count = 0;
        const char *lcore_start = NULL;
        const char *end = NULL;
        int offset;
        rte_cpuset_t cpuset;
        unsigned count = 0;
        const char *lcore_start = NULL;
        const char *end = NULL;
        int offset;
        rte_cpuset_t cpuset;

-       int lflags = 0;
+       int lflags;

        int ret = -1;
 
        if (lcores == NULL)
        int ret = -1;
 
        if (lcores == NULL)


@@ -593,9 +599,6 @@ eal_parse_lcores(const char *lcores)
        /* Remove all blank characters ahead and after */
        while (isblank(*lcores))
                lcores++;
        /* Remove all blank characters ahead and after */
        while (isblank(*lcores))
                lcores++;

-       i = strlen(lcores);
-       while ((i > 0) && isblank(lcores[i - 1]))
-               i--;

 
        CPU_ZERO(&cpuset);
 
 
        CPU_ZERO(&cpuset);
 


@@ -613,6 +616,8 @@ eal_parse_lcores(const char *lcores)
                if (*lcores == '\0')
                        goto err;
 
                if (*lcores == '\0')
                        goto err;
 

+               lflags = 0;
+

                /* record lcore_set start point */
                lcore_start = lcores;
 
                /* record lcore_set start point */
                lcore_start = lcores;
 

diff --git a/lib/librte_eal/common/include/rte_version.h b/lib/librte_eal/common/include/rte_version.h
index 1e14761..615deb7 100644 (file)
--- a/lib/librte_eal/common/include/rte_version.h
+++ b/lib/librte_eal/common/include/rte_version.h
@@ -70,14 +70,14 @@ extern "C" {
 /**
  * Extra string to be appended to version number
  */
 /**
  * Extra string to be appended to version number
  */

-#define RTE_VER_SUFFIX "-rc"
+#define RTE_VER_SUFFIX ""

 
 /**
  * Patch release number
  *   0-15 = release candidates
  *   16   = release
  */
 
 /**
  * Patch release number
  *   0-15 = release candidates
  *   16   = release
  */

-#define RTE_VER_RELEASE 5
+#define RTE_VER_RELEASE 16

 
 /**
  * Macro to compute a version number usable for comparisons
 
 /**
  * Macro to compute a version number usable for comparisons

diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 4dac364..b0fe033 100644 (file)
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -2042,9 +2042,8 @@ int rte_eth_dev_socket_id(uint8_t port_id);
 int rte_eth_dev_is_valid_port(uint8_t port_id);
 
 /**
 int rte_eth_dev_is_valid_port(uint8_t port_id);
 
 /**

- * Allocate mbuf from mempool, setup the DMA physical address
- * and then start RX for specified queue of a port. It is used
- * when rx_deferred_start flag of the specified queue is true.
+ * Start specified RX queue of a port. It is used when rx_deferred_start
+ * flag of the specified queue is true.

  *
  * @param port_id
  *   The port identifier of the Ethernet device
  *
  * @param port_id
  *   The port identifier of the Ethernet device


@@ -2053,7 +2052,7 @@ int rte_eth_dev_is_valid_port(uint8_t port_id);
  *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
  *   to rte_eth_dev_configure().
  * @return
  *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
  *   to rte_eth_dev_configure().
  * @return

- *   - 0: Success, the transmit queue is correctly set up.
+ *   - 0: Success, the receive queue is started.

  *   - -EINVAL: The port_id or the queue_id out of range.
  *   - -ENOTSUP: The function not supported in PMD driver.
  */
  *   - -EINVAL: The port_id or the queue_id out of range.
  *   - -ENOTSUP: The function not supported in PMD driver.
  */


@@ -2069,7 +2068,7 @@ int rte_eth_dev_rx_queue_start(uint8_t port_id, uint16_t rx_queue_id);
  *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
  *   to rte_eth_dev_configure().
  * @return
  *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
  *   to rte_eth_dev_configure().
  * @return

- *   - 0: Success, the transmit queue is correctly set up.
+ *   - 0: Success, the receive queue is stopped.

  *   - -EINVAL: The port_id or the queue_id out of range.
  *   - -ENOTSUP: The function not supported in PMD driver.
  */
  *   - -EINVAL: The port_id or the queue_id out of range.
  *   - -ENOTSUP: The function not supported in PMD driver.
  */


@@ -2086,7 +2085,7 @@ int rte_eth_dev_rx_queue_stop(uint8_t port_id, uint16_t rx_queue_id);
  *   The value must be in the range [0, nb_tx_queue - 1] previously supplied
  *   to rte_eth_dev_configure().
  * @return
  *   The value must be in the range [0, nb_tx_queue - 1] previously supplied
  *   to rte_eth_dev_configure().
  * @return

- *   - 0: Success, the transmit queue is correctly set up.
+ *   - 0: Success, the transmit queue is started.

  *   - -EINVAL: The port_id or the queue_id out of range.
  *   - -ENOTSUP: The function not supported in PMD driver.
  */
  *   - -EINVAL: The port_id or the queue_id out of range.
  *   - -ENOTSUP: The function not supported in PMD driver.
  */


@@ -2102,7 +2101,7 @@ int rte_eth_dev_tx_queue_start(uint8_t port_id, uint16_t tx_queue_id);
  *   The value must be in the range [0, nb_tx_queue - 1] previously supplied
  *   to rte_eth_dev_configure().
  * @return
  *   The value must be in the range [0, nb_tx_queue - 1] previously supplied
  *   to rte_eth_dev_configure().
  * @return

- *   - 0: Success, the transmit queue is correctly set up.
+ *   - 0: Success, the transmit queue is stopped.

  *   - -EINVAL: The port_id or the queue_id out of range.
  *   - -ENOTSUP: The function not supported in PMD driver.
  */
  *   - -EINVAL: The port_id or the queue_id out of range.
  *   - -ENOTSUP: The function not supported in PMD driver.
  */

diff --git a/pkg/dpdk.spec b/pkg/dpdk.spec
index 953f46c..b594e58 100644 (file)
--- a/pkg/dpdk.spec
+++ b/pkg/dpdk.spec
@@ -30,7 +30,7 @@
 # OF THE POSSIBILITY OF SUCH DAMAGE.
 
 Name: dpdk
 # OF THE POSSIBILITY OF SUCH DAMAGE.
 
 Name: dpdk

-Version: 16.04
+Version: 16.07

 Release: 1
 Packager: packaging@6wind.com
 URL: http://dpdk.org
 Release: 1
 Packager: packaging@6wind.com
 URL: http://dpdk.org


@@ -82,7 +82,6 @@ sed -ri 's,(RTE_NEXT_ABI=).*,\1n,'         %{target}/.config
 sed -ri 's,(LIBRTE_VHOST=).*,\1y,'         %{target}/.config
 sed -ri 's,(LIBRTE_PMD_PCAP=).*,\1y,'      %{target}/.config
 sed -ri 's,(LIBRTE_PMD_XENVIRT=).*,\1y,'   %{target}/.config
 sed -ri 's,(LIBRTE_VHOST=).*,\1y,'         %{target}/.config
 sed -ri 's,(LIBRTE_PMD_PCAP=).*,\1y,'      %{target}/.config
 sed -ri 's,(LIBRTE_PMD_XENVIRT=).*,\1y,'   %{target}/.config

-sed -ri 's,(LIBRTE_XEN_DOM0=).*,\1y,'      %{target}/.config

 make O=%{target} %{?_smp_mflags}
 make O=%{target} doc
 
 make O=%{target} %{?_smp_mflags}
 make O=%{target} doc