Add adjacency test

* add 4o4 and 6o6 LISP adjacency tests
* rename basic_topo file to 2_node_topo

Change-Id: Iea386b10948437f5b6ee3c5539deb22bc923f88e
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>

diff --git a/tests/data_plane/configs/vpp_lite_config/basic/4o4_no_odl_adj/vpp1.config b/tests/data_plane/configs/vpp_lite_config/basic/4o4_no_odl_adj/vpp1.config
new file mode 100644 (file)
index 0000000..b348b11
--- /dev/null
+++ b/tests/data_plane/configs/vpp_lite_config/basic/4o4_no_odl_adj/vpp1.config
@@ -0,0 +1,8 @@
+create_host_iface vpp1 6.0.1.1/24
+create_host_iface intervpp1 6.0.3.1/24
+
+lisp_state enable
+lisp_locator_set_with_locator ls1 host-intervpp1 1 1
+lisp_local_eid eid 6.0.1.0/24 locator-set ls1
+lisp_remote_mapping eid 6.0.2.0/24 rloc 6.0.3.2
+lisp_adjacency seid 6.0.1.0/24 deid 6.0.2.0/24

diff --git a/tests/data_plane/configs/vpp_lite_config/basic/4o4_no_odl_adj/vpp2.config b/tests/data_plane/configs/vpp_lite_config/basic/4o4_no_odl_adj/vpp2.config
new file mode 100644 (file)
index 0000000..264d9ca
--- /dev/null
+++ b/tests/data_plane/configs/vpp_lite_config/basic/4o4_no_odl_adj/vpp2.config
@@ -0,0 +1,8 @@
+create_host_iface vpp2 6.0.2.1/24
+create_host_iface intervpp2 6.0.3.2/24
+
+lisp_state enable
+lisp_locator_set_with_locator ls1 host-intervpp2 1 1
+lisp_local_eid eid 6.0.2.0/24 locator-set ls1
+lisp_remote_mapping eid 6.0.1.0/24 rloc 6.0.3.1
+lisp_adjacency seid 6.0.2.0/24 deid 6.0.1.0/24

diff --git a/tests/data_plane/configs/vpp_lite_config/basic/6o6_no_odl_adj/vpp1.config b/tests/data_plane/configs/vpp_lite_config/basic/6o6_no_odl_adj/vpp1.config
new file mode 100644 (file)
index 0000000..22cb8fb
--- /dev/null
+++ b/tests/data_plane/configs/vpp_lite_config/basic/6o6_no_odl_adj/vpp1.config
@@ -0,0 +1,8 @@
+create_host_iface vpp1 6:0:1::1/64
+create_host_iface intervpp1 6:0:3::1/64
+
+lisp_state enable
+lisp_locator_set_with_locator ls1 host-intervpp1 1 1
+lisp_local_eid eid 6:0:1::0/64 locator-set ls1
+lisp_remote_mapping eid 6:0:2::0/64 rloc 6:0:3::2
+lisp_adjacency seid 6:0:1::0/64 deid 6:0:2::0/64

diff --git a/tests/data_plane/configs/vpp_lite_config/basic/6o6_no_odl_adj/vpp2.config b/tests/data_plane/configs/vpp_lite_config/basic/6o6_no_odl_adj/vpp2.config
new file mode 100644 (file)
index 0000000..72829af
--- /dev/null
+++ b/tests/data_plane/configs/vpp_lite_config/basic/6o6_no_odl_adj/vpp2.config
@@ -0,0 +1,8 @@
+create_host_iface vpp2 6:0:2::1/64
+create_host_iface intervpp2 6:0:3::2/64
+
+lisp_state enable
+lisp_locator_set_with_locator ls1 host-intervpp2 1 1
+lisp_local_eid eid 6:0:2::0/64 locator-set ls1
+lisp_remote_mapping eid 6:0:1::0/64 rloc 6:0:3::1
+lisp_adjacency deid 6:0:1::0/64 seid 6:0:2::0/64

diff --git a/tests/data_plane/vpp_lite_topo/scripts/cmd_mappings.py b/tests/data_plane/vpp_lite_topo/scripts/cmd_mappings.py
index 87ec8cb..d0d9f0f 100644 (file)
--- a/tests/data_plane/vpp_lite_topo/scripts/cmd_mappings.py
+++ b/tests/data_plane/vpp_lite_topo/scripts/cmd_mappings.py
@@ -58,6 +58,7 @@ SimpleMapping('lisp_map_resolver', 'lisp map-resolver', 'lisp_add_del_map_resolv
 SimpleMapping('lisp_local_eid', 'lisp eid-table', 'lisp_add_del_local_eid')
 SimpleMapping('lisp_remote_mapping', 'lisp remote-mapping', 'lisp_add_del_remote_mapping')
 SimpleMapping('lisp_pitr', 'lisp pitr ls', 'lisp_pitr_set_locator_set locator-set')
+SimpleMapping('lisp_adjacency', 'lisp adjacency', 'lisp_add_del_adjacency')
 SimpleMapping('set_if_ip', 'set int ip address', 'sw_interface_add_del_address')
 
 CustomMapping('lisp_eid_map_bd',

diff --git a/tests/data_plane/vpp_lite_topo/test_driver/basic.sh b/tests/data_plane/vpp_lite_topo/test_driver/basic.sh
index cd10d4c..88753bf 100644 (file)
--- a/tests/data_plane/vpp_lite_topo/test_driver/basic.sh
+++ b/tests/data_plane/vpp_lite_topo/test_driver/basic.sh
@@ -1,13 +1,13 @@
 source config.sh
 source odl_utils.sh
-source topologies/basic_topo.sh
+source topologies/2_node_topo.sh
 
 ODL_CONFIG_FILE1="vpp1.json"
 ODL_CONFIG_FILE2="vpp2.json"
 ODL_CONFIG_FILE3="update_vpp2.json"
 
 if [ "$1" == "clean" ] ; then
-  basic_topo_clean
+  2_node_topo_clean
   exit 0
 fi
 
@@ -19,14 +19,14 @@ fi
 function test_basic
 {
   if [ "$3" != "no_setup" ] ; then
-    basic_topo_setup
+    2_node_topo_setup
   fi
 
   maybe_pause
   test_result=1
 
   ip netns exec vppns1 "${1}" -w 15 -c 1 "${2}"
-  assert_rc_ok $? basic_topo_clean "No ICMP response!"
+  assert_rc_ok $? 2_node_topo_clean "No ICMP response!"
 
   maybe_pause
   # change IP addresses of destination RLOC
@@ -42,7 +42,7 @@ function test_basic
   # test done
 
   maybe_pause
-  basic_topo_clean
+  2_node_topo_clean
   print_status $rc "No ICMP response!"
   exit $test_result
 }

diff --git a/tests/data_plane/vpp_lite_topo/test_driver/basic_multi_traffic.sh b/tests/data_plane/vpp_lite_topo/test_driver/basic_multi_traffic.sh
index 79456b7..ee24891 100644 (file)
--- a/tests/data_plane/vpp_lite_topo/test_driver/basic_multi_traffic.sh
+++ b/tests/data_plane/vpp_lite_topo/test_driver/basic_multi_traffic.sh
@@ -1,13 +1,13 @@
 source config.sh
 source odl_utils.sh
-source topologies/basic_topo.sh
+source topologies/2_node_topo.sh
 
 ODL_CONFIG_FILE1="vpp1.json"
 ODL_CONFIG_FILE2="vpp2.json"
 ODL_CONFIG_FILE3="update_vpp2.json"
 
 if [ "$1" == "clean" ] ; then
-  basic_topo_clean
+  2_node_topo_clean
   exit 0
 fi
 
@@ -18,7 +18,7 @@ fi
 
 function test_basic_multi_traffic
 {
-  basic_topo_setup
+  2_node_topo_setup
 
   # additional setup
   ODL_CONFIG_DIR=`pwd`/../configs/odl/basic/4o4
@@ -30,10 +30,10 @@ function test_basic_multi_traffic
   maybe_pause
 
   ip netns exec vppns1 "${1}" -w 15 -c 1 "${2}"
-  assert_rc_ok $? basic_topo_clean "No response received!"
+  assert_rc_ok $? 2_node_topo_clean "No response received!"
 
   ip netns exec vppns1 "${3}" -w 15 -c 1 "${4}"
-  assert_rc_ok $? basic_topo_clean "No response received!"
+  assert_rc_ok $? 2_node_topo_clean "No response received!"
 
   # change IP addresses of destination RLOC
   echo "set int ip address del host-intervpp2 6.0.3.2/24" | nc 0 5003
@@ -49,7 +49,7 @@ function test_basic_multi_traffic
   maybe_pause
 
   ip netns exec vppns1 "${1}" -w 15 -c 1 "${2}"
-  assert_rc_ok $? basic_topo_clean "No response received!"
+  assert_rc_ok $? 2_node_topo_clean "No response received!"
 
   ip netns exec vppns1 "${3}" -w 15 -c 1 "${4}"
   rc=$?
@@ -57,9 +57,8 @@ function test_basic_multi_traffic
   maybe_pause
 
   # test done
-  basic_topo_clean
+  2_node_topo_clean
   print_status $rc "No ICMP response!"
 
   exit $test_result
 }
-

diff --git a/tests/data_plane/vpp_lite_topo/test_driver/basic_no_odl.sh b/tests/data_plane/vpp_lite_topo/test_driver/basic_no_odl.sh
index 6d06a16..9996111 100644 (file)
--- a/tests/data_plane/vpp_lite_topo/test_driver/basic_no_odl.sh
+++ b/tests/data_plane/vpp_lite_topo/test_driver/basic_no_odl.sh
@@ -1,9 +1,9 @@
 source config.sh
 source odl_utils.sh
-source topologies/basic_topo.sh
+source topologies/2_node_topo.sh
 
 if [ "$1" == "clean" ] ; then
-  basic_topo_clean
+  2_node_topo_clean
   exit 0
 fi
 
@@ -14,7 +14,7 @@ fi
 
 function test_basic_no_odl
 {
-  basic_topo_setup no_odl
+  2_node_topo_setup no_odl
 
   maybe_pause
 
@@ -23,7 +23,7 @@ function test_basic_no_odl
   ip netns exec vppns1 "${1}" -w 15 -c 1 "${2}"
   if [ $? -ne 0 ] ; then
     echo "No response received!"
-    basic_topo_clean no_odl
+    2_node_topo_clean no_odl
     exit $test_result
   fi
 
@@ -45,7 +45,7 @@ function test_basic_no_odl
 
   # test done
 
-  basic_topo_clean no_odl
+  2_node_topo_clean no_odl
   if [ $rc -ne 0 ] ; then
     echo "Test failed: No ICMP response received within specified timeout limit!"
   else

diff --git a/tests/data_plane/vpp_lite_topo/test_driver/basic_single_icmp.sh b/tests/data_plane/vpp_lite_topo/test_driver/basic_single_icmp.sh
new file mode 100644 (file)
index 0000000..63c8b5a
--- /dev/null
+++ b/tests/data_plane/vpp_lite_topo/test_driver/basic_single_icmp.sh
@@ -0,0 +1,29 @@
+source config.sh
+source topologies/2_node_topo.sh
+
+if [ "$1" == "clean" ] ; then
+  2_node_topo_clean no_odl
+  exit 0
+fi
+
+if [[ $(id -u) != 0 ]]; then
+  echo "Error: run this as a root."
+  exit 1
+fi
+
+function test_single_icmp
+{
+  2_node_topo_setup no_odl
+  maybe_pause
+  test_result=1
+
+  # send only one ping request
+  ip netns exec vppns1 "${1}" -c 1 "${2}"
+  rc=$?
+
+  # test done
+  maybe_pause
+  2_node_topo_clean no_odl
+  print_status $rc "No ICMP response!"
+  exit $test_result
+}

diff --git a/tests/data_plane/vpp_lite_topo/tests/test_basic_4o4_no_odl_with_adjacency.sh b/tests/data_plane/vpp_lite_topo/tests/test_basic_4o4_no_odl_with_adjacency.sh
new file mode 100755 (executable)
index 0000000..7c3f0c3
--- /dev/null
+++ b/tests/data_plane/vpp_lite_topo/tests/test_basic_4o4_no_odl_with_adjacency.sh
@@ -0,0 +1,10 @@
+#!/usr/bin/env bash
+
+# Test basic LISP functionality without odl and adjacencies configured
+# (ip4 over ip4)
+
+VPP_LITE_CONF=`pwd`/../configs/vpp_lite_config/basic/4o4_no_odl_adj
+
+source test_driver/basic_single_icmp.sh
+
+test_single_icmp ping "6.0.2.2"

diff --git a/tests/data_plane/vpp_lite_topo/tests/test_basic_6o6_no_odl_with_adjacency.sh b/tests/data_plane/vpp_lite_topo/tests/test_basic_6o6_no_odl_with_adjacency.sh
new file mode 100755 (executable)
index 0000000..ef40096
--- /dev/null
+++ b/tests/data_plane/vpp_lite_topo/tests/test_basic_6o6_no_odl_with_adjacency.sh
@@ -0,0 +1,10 @@
+#!/usr/bin/env bash
+
+# Test basic LISP functionality without odl and adjacencies configured
+# (ip6 over ip6)
+
+VPP_LITE_CONF=`pwd`/../configs/vpp_lite_config/basic/6o6_no_odl_adj
+
+source test_driver/basic_single_icmp.sh
+
+test_single_icmp ping6 "6:0:2::2"

diff --git a/tests/data_plane/vpp_lite_topo/topologies/basic_topo.sh b/tests/data_plane/vpp_lite_topo/topologies/2_node_topo.sh
similarity index 69%
rename from tests/data_plane/vpp_lite_topo/topologies/basic_topo.sh
rename to tests/data_plane/vpp_lite_topo/topologies/2_node_topo.sh
index 15aaa51..eafa09e 100644 (file)
--- a/tests/data_plane/vpp_lite_topo/topologies/basic_topo.sh
+++ b/tests/data_plane/vpp_lite_topo/topologies/2_node_topo.sh
@@ -1,6 +1,37 @@
-#!/usr/bin/env bash
 
-function basic_topo_clean
+#
+#                                +--------+
+#                                |        |
+#                                |   MR   |
+#                                |        |
+#                                +--------+
+#                                     |6.0.3.100
+#6:0:1::2                             |6:0:3::100
+#6.0.1.2     vpp1 +--------+          |         +--------+
+#       +---------+        |intervpp1 |intervpp2|        |vpp2
+#                 |  VPP1  +----------+---------+  VPP2  +---------+
+#                 |        |                    |        |      6.0.2.2
+#                 +--------+                    +--------+      6:0:2::2
+#
+
+function set_arp
+{
+  mac=`ip netns exec vppns1 ip a show dev veth_vpp1  | grep "link/ether" | awk '{print $2}'`
+  echo "set ip arp host-vpp1 6.0.1.2 $mac" | nc 0 5002
+  echo "set ip6 neighbor host-vpp1 6:0:1::2 $mac" | nc 0 5002
+
+  mac=`ip netns exec vppns2 ip a show dev veth_vpp2  | grep "link/ether" | awk '{print $2}'`
+  echo "set ip arp host-vpp2 6.0.2.2 $mac" | nc 0 5003
+  echo "set ip6 neighbor host-vpp2 6:0:2::2 $mac" | nc 0 5003
+
+  mac=`echo "sh hard host-intervpp1" | nc 0 5002 | grep 'Ethernet address' | awk '{print $3}'`
+  echo "set ip arp host-intervpp2 6.0.3.1 $mac" | nc 0 5003
+
+  mac=`echo "sh hard host-intervpp2" | nc 0 5003 | grep 'Ethernet address' | awk '{print $3}'`
+  echo "set ip arp host-intervpp1 6.0.3.2 $mac" | nc 0 5002
+}
+
+function 2_node_topo_clean
 {
   echo "Clearing all VPP instances.."
   pkill vpp --signal 9
@@ -23,7 +54,7 @@ function basic_topo_clean
   fi
 }
 
-function basic_topo_setup
+function 2_node_topo_setup
 {
 
   # create vpp to clients and inter-vpp namespaces
@@ -107,4 +138,6 @@ function basic_topo_setup
     post_curl "add-mapping" ${ODL_CONFIG_FILE1}
     post_curl "add-mapping" ${ODL_CONFIG_FILE2}
   fi
+
+  set_arp
 }