Makefile

   1 # Copyright (c) 2016 Cisco and/or its affiliates.
   2 # Licensed under the Apache License, Version 2.0 (the "License");
   3 # you may not use this file except in compliance with the License.
   4 # You may obtain a copy of the License at:
   5 #
   6 #     http://www.apache.org/licenses/LICENSE-2.0
   7 #
   8 # Unless required by applicable law or agreed to in writing, software
   9 # distributed under the License is distributed on an "AS IS" BASIS,
  10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  11 # See the License for the specific language governing permissions and
  12 # limitations under the License.
  13
  14 export WS_ROOT=$(CURDIR)
  15 export BR=$(WS_ROOT)/build-root
  16 CCACHE_DIR?=$(BR)/.ccache
  17 GDB?=gdb
  18 PLATFORM?=vpp
  19 SAMPLE_PLUGIN?=no
  20 STARTUP_DIR?=$(PWD)
  21 MACHINE=$(shell uname -m)
  22 SUDO?=sudo
  23
  24 ,:=,
  25 define disable_plugins
  26 $(if $(1), \
  27   "plugins {" \
  28   $(patsubst %,"plugin %_plugin.so { disable }",$(subst $(,), ,$(1))) \
  29   " }" \
  30   ,)
  31 endef
  32
  33 MINIMAL_STARTUP_CONF="                                                  \
  34 unix {                                                                  \
  35         interactive                                                     \
  36         cli-listen /run/vpp/cli.sock                                    \
  37         gid $(shell id -g)                                              \
  38         $(if $(wildcard startup.vpp),"exec startup.vpp",)               \
  39 }                                                                       \
  40 $(if $(DPDK_CONFIG), "dpdk { $(DPDK_CONFIG) }",)                        \
  41 $(call disable_plugins,$(DISABLED_PLUGINS))                             \
  42 "
  43
  44 GDB_ARGS= -ex "handle SIGUSR1 noprint nostop"
  45
  46 #
  47 # OS Detection
  48 #
  49 # We allow Darwin (MacOS) for docs generation; VPP build will still fail.
  50 ifneq ($(shell uname),Darwin)
  51 OS_ID        = $(shell grep '^ID=' /etc/os-release | cut -f2- -d= | sed -e 's/\"//g')
  52 OS_VERSION_ID= $(shell grep '^VERSION_ID=' /etc/os-release | cut -f2- -d= | sed -e 's/\"//g')
  53 endif
  54
  55 ifeq ($(filter ubuntu debian,$(OS_ID)),$(OS_ID))
  56 PKG=deb
  57 else ifeq ($(filter rhel centos fedora opensuse opensuse-leap opensuse-tumbleweed,$(OS_ID)),$(OS_ID))
  58 PKG=rpm
  59 endif
  60
  61 # +libganglia1-dev if building the gmond plugin
  62
  63 DEB_DEPENDS  = curl build-essential autoconf automake ccache
  64 DEB_DEPENDS += debhelper dkms git libtool libapr1-dev dh-systemd
  65 DEB_DEPENDS += libconfuse-dev git-review exuberant-ctags cscope pkg-config
  66 DEB_DEPENDS += lcov chrpath autoconf indent clang-format libnuma-dev
  67 DEB_DEPENDS += python-all python-dev python-virtualenv python-pip libffi6 check
  68 DEB_DEPENDS += libboost-all-dev libffi-dev python-ply libmbedtls-dev
  69 DEB_DEPENDS += cmake ninja-build
  70 ifeq ($(OS_VERSION_ID),14.04)
  71         DEB_DEPENDS += openjdk-8-jdk-headless
  72         DEB_DEPENDS += libssl-dev
  73 else ifeq ($(OS_ID)-$(OS_VERSION_ID),debian-8)
  74         DEB_DEPENDS += openjdk-8-jdk-headless
  75         DEB_DEPENDS += libssl-dev
  76         APT_ARGS = -t jessie-backports
  77 else ifeq ($(OS_ID)-$(OS_VERSION_ID),debian-9)
  78         DEB_DEPENDS += default-jdk-headless
  79         DEB_DEPENDS += libssl1.0-dev
  80 else
  81         DEB_DEPENDS += default-jdk-headless
  82         DEB_DEPENDS += libssl-dev
  83 endif
  84
  85 RPM_DEPENDS  = redhat-lsb glibc-static java-1.8.0-openjdk-devel yum-utils
  86 RPM_DEPENDS += apr-devel
  87 RPM_DEPENDS += numactl-devel
  88 RPM_DEPENDS += check check-devel
  89 RPM_DEPENDS += boost boost-devel
  90 RPM_DEPENDS += selinux-policy selinux-policy-devel
  91 RPM_DEPENDS += cmake3 ninja-build
  92
  93 ifeq ($(OS_ID)-$(OS_VERSION_ID),fedora-25)
  94         RPM_DEPENDS += subunit subunit-devel
  95         RPM_DEPENDS += openssl-devel
  96         RPM_DEPENDS += python-devel python2-ply
  97         RPM_DEPENDS += python2-virtualenv
  98         RPM_DEPENDS += mbedtls-devel
  99         RPM_DEPENDS_GROUPS = 'C Development Tools and Libraries'
 100 else ifeq ($(shell if [ "$(OS_ID)" = "fedora" ]; then test $(OS_VERSION_ID) -gt 25; echo $$?; fi),0)
 101         RPM_DEPENDS += subunit subunit-devel
 102         RPM_DEPENDS += compat-openssl10-devel
 103         RPM_DEPENDS += python2-devel python2-ply
 104         RPM_DEPENDS += python2-virtualenv
 105         RPM_DEPENDS += mbedtls-devel
 106         RPM_DEPENDS_GROUPS = 'C Development Tools and Libraries'
 107 else
 108         RPM_DEPENDS += openssl-devel
 109         RPM_DEPENDS += python-devel python-ply
 110         RPM_DEPENDS += python-virtualenv
 111         RPM_DEPENDS += devtoolset-7
 112         RPM_DEPENDS_GROUPS = 'Development Tools'
 113 endif
 114
 115 # +ganglia-devel if building the ganglia plugin
 116
 117 RPM_DEPENDS += chrpath libffi-devel rpm-build
 118
 119 SUSE_NAME= $(shell grep '^NAME=' /etc/os-release | cut -f2- -d= | sed -e 's/\"//g' | cut -d' ' -f2)
 120 SUSE_ID= $(shell grep '^VERSION_ID=' /etc/os-release | cut -f2- -d= | sed -e 's/\"//g' | cut -d' ' -f2)
 121 RPM_SUSE_BUILDTOOLS_DEPS = autoconf automake ccache check-devel chrpath
 122 RPM_SUSE_BUILDTOOLS_DEPS += clang cmake indent libtool make ninja python-ply
 123
 124 RPM_SUSE_DEVEL_DEPS = glibc-devel-static java-1_8_0-openjdk-devel libnuma-devel
 125 RPM_SUSE_DEVEL_DEPS += libopenssl-devel openssl-devel mbedtls-devel
 126
 127 RPM_SUSE_PYTHON_DEPS = python-devel python3-devel python-pip python3-pip
 128 RPM_SUSE_PYTHON_DEPS += python-rpm-macros python3-rpm-macros
 129
 130 RPM_SUSE_PLATFORM_DEPS = distribution-release shadow rpm-build
 131
 132 ifeq ($(OS_ID),opensuse)
 133 ifeq ($(SUSE_NAME),Tumbleweed)
 134         RPM_SUSE_DEVEL_DEPS = libboost_headers-devel libboost_thread-devel gcc
 135         RPM_SUSE_PYTHON_DEPS += python2-ply python2-virtualenv
 136 endif
 137 ifeq ($(SUSE_ID),15.0)
 138         RPM_SUSE_DEVEL_DEPS = libboost_headers-devel libboost_thread-devel gcc6
 139         RPM_SUSE_PYTHON_DEPS += python2-ply python2-virtualenv
 140 else
 141         RPM_SUSE_DEVEL_DEPS += boost_1_61-devel gcc6
 142         RPM_SUSE_PYTHON_DEPS += python-virtualenv
 143 endif
 144 endif
 145
 146 ifeq ($(OS_ID),opensuse-leap)
 147 ifeq ($(SUSE_ID),15.0)
 148         RPM_SUSE_DEVEL_DEPS = libboost_headers-devel libboost_thread-devel gcc6
 149         RPM_SUSE_PYTHON_DEPS += python2-ply python2-virtualenv
 150 endif
 151 endif
 152
 153 RPM_SUSE_DEPENDS += $(RPM_SUSE_BUILDTOOLS_DEPS) $(RPM_SUSE_DEVEL_DEPS) $(RPM_SUSE_PYTHON_DEPS) $(RPM_SUSE_PLATFORM_DEPS)
 154
 155 ifneq ($(wildcard $(STARTUP_DIR)/startup.conf),)
 156         STARTUP_CONF ?= $(STARTUP_DIR)/startup.conf
 157 endif
 158
 159 ifeq ($(findstring y,$(UNATTENDED)),y)
 160 CONFIRM=-y
 161 FORCE=--force-yes
 162 endif
 163
 164 TARGETS = vpp
 165
 166 ifneq ($(SAMPLE_PLUGIN),no)
 167 TARGETS += sample-plugin
 168 endif
 169
 170 .PHONY: help wipe wipe-release build build-release rebuild rebuild-release
 171 .PHONY: run run-release debug debug-release build-vat run-vat pkg-deb pkg-rpm
 172 .PHONY: ctags cscope
 173 .PHONY: test test-debug retest retest-debug test-doc test-wipe-doc test-help test-wipe
 174 .PHONY: test-cov test-wipe-cov
 175
 176 define banner
 177         @echo "========================================================================"
 178         @echo " $(1)"
 179         @echo "========================================================================"
 180         @echo " "
 181 endef
 182
 183 help:
 184         @echo "Make Targets:"
 185         @echo " install-dep         - install software dependencies"
 186         @echo " wipe                - wipe all products of debug build "
 187         @echo " wipe-release        - wipe all products of release build "
 188         @echo " build               - build debug binaries"
 189         @echo " build-release       - build release binaries"
 190         @echo " build-coverity      - build coverity artifacts"
 191         @echo " rebuild             - wipe and build debug binares"
 192         @echo " rebuild-release     - wipe and build release binares"
 193         @echo " run                 - run debug binary"
 194         @echo " run-release         - run release binary"
 195         @echo " debug               - run debug binary with debugger"
 196         @echo " debug-release       - run release binary with debugger"
 197         @echo " test                - build and run (basic) functional tests"
 198         @echo " test-debug          - build and run (basic) functional tests (debug build)"
 199         @echo " test-all            - build and run (all) functional tests"
 200         @echo " test-all-debug      - build and run (all) functional tests (debug build)"
 201         @echo " test-ext            - build and run 'extras' functional tests"
 202         @echo " test-shell          - enter shell with test environment"
 203         @echo " test-shell-debug    - enter shell with test environment (debug build)"
 204         @echo " test-wipe           - wipe files generated by unit tests"
 205         @echo " retest              - run functional tests"
 206         @echo " retest-debug        - run functional tests (debug build)"
 207         @echo " test-help           - show help on test framework"
 208         @echo " run-vat             - run vpp-api-test tool"
 209         @echo " pkg-deb             - build DEB packages"
 210         @echo " pkg-rpm             - build RPM packages"
 211         @echo " install-ext-deps    - install external development dependencies"
 212         @echo " ctags               - (re)generate ctags database"
 213         @echo " gtags               - (re)generate gtags database"
 214         @echo " cscope              - (re)generate cscope database"
 215         @echo " checkstyle          - check coding style"
 216         @echo " fixstyle            - fix coding style"
 217         @echo " doxygen             - (re)generate documentation"
 218         @echo " bootstrap-doxygen   - setup Doxygen dependencies"
 219         @echo " wipe-doxygen        - wipe all generated documentation"
 220         @echo " docs                 - Build the Sphinx documentation"
 221         @echo " docs-venv         - Build the virtual environment for the Sphinx docs"
 222         @echo " docs-clean        - Remove the generated files from the Sphinx docs"
 223         @echo " test-doc            - generate documentation for test framework"
 224         @echo " test-wipe-doc       - wipe documentation for test framework"
 225         @echo " test-cov            - generate code coverage report for test framework"
 226         @echo " test-wipe-cov       - wipe code coverage report for test framework"
 227         @echo " test-checkstyle     - check PEP8 compliance for test framework"
 228         @echo ""
 229         @echo "Make Arguments:"
 230         @echo " V=[0|1]                  - set build verbosity level"
 231         @echo " STARTUP_CONF=<path>      - startup configuration file"
 232         @echo "                            (e.g. /etc/vpp/startup.conf)"
 233         @echo " STARTUP_DIR=<path>       - startup drectory (e.g. /etc/vpp)"
 234         @echo "                            It also sets STARTUP_CONF if"
 235         @echo "                            startup.conf file is present"
 236         @echo " GDB=<path>               - gdb binary to use for debugging"
 237         @echo " PLATFORM=<name>          - target platform. default is vpp"
 238         @echo " TEST=<filter>            - apply filter to test set, see test-help"
 239         @echo " DPDK_CONFIG=<conf>       - add specified dpdk config commands to"
 240         @echo "                            autogenerated startup.conf"
 241         @echo "                            (e.g. \"no-pci\" )"
 242         @echo " SAMPLE_PLUGIN=yes        - in addition build/run/debug sample plugin"
 243         @echo " DISABLED_PLUGINS=<list>  - comma separated list of plugins which"
 244         @echo "                            should not be loaded"
 245         @echo ""
 246         @echo "Current Argument Values:"
 247         @echo " V                 = $(V)"
 248         @echo " STARTUP_CONF      = $(STARTUP_CONF)"
 249         @echo " STARTUP_DIR       = $(STARTUP_DIR)"
 250         @echo " GDB               = $(GDB)"
 251         @echo " PLATFORM          = $(PLATFORM)"
 252         @echo " DPDK_VERSION      = $(DPDK_VERSION)"
 253         @echo " DPDK_CONFIG       = $(DPDK_CONFIG)"
 254         @echo " SAMPLE_PLUGIN     = $(SAMPLE_PLUGIN)"
 255         @echo " DISABLED_PLUGINS  = $(DISABLED_PLUGINS)"
 256
 257 $(BR)/.deps.ok:
 258 ifeq ($(findstring y,$(UNATTENDED)),y)
 259         make install-dep
 260 endif
 261 ifeq ($(filter ubuntu debian,$(OS_ID)),$(OS_ID))
 262         @MISSING=$$(apt-get install -y -qq -s $(DEB_DEPENDS) | grep "^Inst ") ; \
 263         if [ -n "$$MISSING" ] ; then \
 264           echo "\nPlease install missing packages: \n$$MISSING\n" ; \
 265           echo "by executing \"make install-dep\"\n" ; \
 266           exit 1 ; \
 267         fi ; \
 268         exit 0
 269 else ifneq ("$(wildcard /etc/redhat-release)","")
 270         @for i in $(RPM_DEPENDS) ; do \
 271             RPM=$$(basename -s .rpm "$${i##*/}" | cut -d- -f1,2,3)  ;   \
 272             MISSING+=$$(rpm -q $$RPM | grep "^package")    ;    \
 273         done                                                       ;    \
 274         if [ -n "$$MISSING" ] ; then \
 275           echo "Please install missing RPMs: \n$$MISSING\n" ; \
 276           echo "by executing \"make install-dep\"\n" ; \
 277           exit 1 ; \
 278         fi ; \
 279         exit 0
 280 endif
 281         @touch $@
 282
 283 bootstrap:
 284         @echo "'make bootstrap' is not needed anymore"
 285
 286 install-dep:
 287 ifeq ($(filter ubuntu debian,$(OS_ID)),$(OS_ID))
 288 ifeq ($(OS_VERSION_ID),14.04)
 289         @sudo -E apt-get $(CONFIRM) $(FORCE) install software-properties-common
 290         @sudo -E add-apt-repository ppa:openjdk-r/ppa $(CONFIRM)
 291 endif
 292 ifeq ($(OS_ID)-$(OS_VERSION_ID),debian-8)
 293         @grep -q jessie-backports /etc/apt/sources.list /etc/apt/sources.list.d/* 2> /dev/null \
 294            || ( echo "Please install jessie-backports" ; exit 1 )
 295 endif
 296         @sudo -E apt-get update
 297         @sudo -E apt-get $(APT_ARGS) $(CONFIRM) $(FORCE) install $(DEB_DEPENDS)
 298 else ifneq ("$(wildcard /etc/redhat-release)","")
 299         @sudo -E yum groupinstall $(CONFIRM) $(RPM_DEPENDS_GROUPS)
 300         @sudo -E yum install $(CONFIRM) centos-release-scl-rh
 301         @sudo -E yum install $(CONFIRM) $(RPM_DEPENDS)
 302         @sudo -E debuginfo-install $(CONFIRM) glibc openssl-libs mbedtls-devel zlib
 303 else ifeq ($(filter opensuse-tumbleweed,$(OS_ID)),$(OS_ID))
 304         @sudo -E zypper refresh
 305         @sudo -E zypper install -y $(RPM_SUSE_DEPENDS)
 306 else ifeq ($(filter opensuse-leap,$(OS_ID)),$(OS_ID))
 307         @sudo -E zypper refresh
 308         @sudo -E zypper install -y $(RPM_SUSE_DEPENDS)
 309 else ifeq ($(filter opensuse,$(OS_ID)),$(OS_ID))
 310         @sudo -E zypper refresh
 311         @sudo -E zypper install -y $(RPM_SUSE_DEPENDS)
 312 else
 313         $(error "This option currently works only on Ubuntu, Debian, Centos or openSUSE systems")
 314 endif
 315
 316 define make
 317         @make -C $(BR) PLATFORM=$(PLATFORM) TAG=$(1) $(2)
 318 endef
 319
 320 $(BR)/scripts/.version:
 321 ifneq ("$(wildcard /etc/redhat-release)","")
 322         $(shell $(BR)/scripts/version rpm-string > $(BR)/scripts/.version)
 323 else
 324         $(shell $(BR)/scripts/version > $(BR)/scripts/.version)
 325 endif
 326
 327 DIST_FILE = $(BR)/vpp-$(shell src/scripts/version).tar
 328 DIST_SUBDIR = vpp-$(shell src/scripts/version|cut -f1 -d-)
 329
 330 dist:
 331         @if git rev-parse 2> /dev/null ; then \
 332             git archive \
 333               --prefix=$(DIST_SUBDIR)/ \
 334               --format=tar \
 335               -o $(DIST_FILE) \
 336             HEAD ; \
 337             git describe > $(BR)/.version ; \
 338         else \
 339             (cd .. ; tar -cf $(DIST_FILE) $(DIST_SUBDIR) --exclude=*.tar) ; \
 340             src/scripts/version > $(BR)/.version ; \
 341         fi
 342         @tar --append \
 343           --file $(DIST_FILE) \
 344           --transform='s,.*/.version,$(DIST_SUBDIR)/src/scripts/.version,' \
 345           $(BR)/.version
 346         @$(RM) $(BR)/.version $(DIST_FILE).xz
 347         @xz -v --threads=0 $(DIST_FILE)
 348         @$(RM) $(BR)/vpp-latest.tar.xz
 349         @ln -rs $(DIST_FILE).xz $(BR)/vpp-latest.tar.xz
 350
 351 build: $(BR)/.deps.ok
 352         $(call make,$(PLATFORM)_debug,$(addsuffix -install,$(TARGETS)))
 353
 354 wipedist:
 355         @$(RM) $(BR)/*.tar.xz
 356
 357 wipe: wipedist test-wipe $(BR)/.deps.ok
 358         $(call make,$(PLATFORM)_debug,$(addsuffix -wipe,$(TARGETS)))
 359
 360 rebuild: wipe build
 361
 362 build-release: $(BR)/.deps.ok
 363         $(call make,$(PLATFORM),$(addsuffix -install,$(TARGETS)))
 364
 365 wipe-release: test-wipe $(BR)/.deps.ok
 366         $(call make,$(PLATFORM),$(addsuffix -wipe,$(TARGETS)))
 367
 368 rebuild-release: wipe-release build-release
 369
 370 export VPP_PYTHON_PREFIX ?= $(BR)/python
 371
 372 libexpand = $(subst $(subst ,, ),:,$(foreach lib,$(1),$(BR)/install-$(2)-native/vpp/$(lib)/$(3)))
 373
 374 define test
 375         $(if $(filter-out $(3),retest),make -C $(BR) PLATFORM=$(1) TAG=$(2) vpp-install,)
 376         $(eval libs:=lib lib64)
 377         make -C test \
 378           TEST_DIR=$(WS_ROOT)/test \
 379           VPP_TEST_BUILD_DIR=$(BR)/build-$(2)-native \
 380           VPP_TEST_BIN=$(BR)/install-$(2)-native/vpp/bin/vpp \
 381           VPP_TEST_PLUGIN_PATH=$(call libexpand,$(libs),$(2),vpp_plugins) \
 382           VPP_TEST_INSTALL_PATH=$(BR)/install-$(2)-native/ \
 383           LD_LIBRARY_PATH=$(call libexpand,$(libs),$(2),) \
 384           EXTENDED_TESTS=$(EXTENDED_TESTS) \
 385           PYTHON=$(PYTHON) \
 386           OS_ID=$(OS_ID) \
 387           CACHE_OUTPUT=$(CACHE_OUTPUT) \
 388           $(3)
 389 endef
 390
 391 test:
 392         $(call test,vpp,vpp,test)
 393
 394 test-debug:
 395         $(call test,vpp,vpp_debug,test)
 396
 397 test-all:
 398         $(eval EXTENDED_TESTS=yes)
 399         $(call test,vpp,vpp,test)
 400
 401 test-ext:
 402         $(if $(filter-out $(3),retest),make -C $(BR) PLATFORM=vpp TAG=vpp_debug vom-install japi-install,)
 403         $(eval EXTENDED_TESTS=yes)
 404         $(call test,vpp,vpp_debug,test-ext)
 405
 406 test-all-debug:
 407         $(eval EXTENDED_TESTS=yes)
 408         $(call test,vpp,vpp_debug,test)
 409
 410 test-help:
 411         @make -C test help
 412
 413 test-wipe:
 414         @make -C test wipe
 415
 416 test-shell:
 417         $(call test,vpp,vpp,shell)
 418
 419 test-shell-debug:
 420         $(call test,vpp,vpp_debug,shell)
 421
 422 test-dep:
 423         @make -C test test-dep
 424
 425 test-doc:
 426         @make -C test doc
 427
 428 test-wipe-doc:
 429         @make -C test wipe-doc
 430
 431 test-cov:
 432         $(eval EXTENDED_TESTS=yes)
 433         $(call test,vpp,vpp_gcov,cov)
 434
 435 test-wipe-cov:
 436         @make -C test wipe-cov
 437
 438 test-checkstyle:
 439         @make -C test checkstyle
 440
 441 retest:
 442         $(call test,vpp,vpp,retest)
 443
 444 retest-debug:
 445         $(call test,vpp,vpp_debug,retest)
 446
 447 ifeq ("$(wildcard $(STARTUP_CONF))","")
 448 define run
 449         @echo "WARNING: STARTUP_CONF not defined or file doesn't exist."
 450         @echo "         Running with minimal startup config: $(MINIMAL_STARTUP_CONF)\n"
 451         @cd $(STARTUP_DIR) && \
 452           $(SUDO) $(2) $(1)/vpp/bin/vpp $(MINIMAL_STARTUP_CONF)
 453 endef
 454 else
 455 define run
 456         @cd $(STARTUP_DIR) && \
 457           $(SUDO) $(2) $(1)/vpp/bin/vpp $(shell cat $(STARTUP_CONF) | sed -e 's/#.*//')
 458 endef
 459 endif
 460
 461 %.files: .FORCE
 462         @find . \( -name '*\.[chyS]' -o -name '*\.java' -o -name '*\.lex' \) -and \
 463                 \( -not -path './build-root*' -o -path \
 464                 './build-root/build-vpp_debug-native/dpdk*' \) > $@
 465
 466 .FORCE:
 467
 468 run:
 469         $(call run, $(BR)/install-$(PLATFORM)_debug-native)
 470
 471 run-release:
 472         $(call run, $(BR)/install-$(PLATFORM)-native)
 473
 474 debug:
 475         $(call run, $(BR)/install-$(PLATFORM)_debug-native,$(GDB) $(GDB_ARGS) --args)
 476
 477 build-coverity:
 478         $(call make,$(PLATFORM)_coverity,install-packages)
 479
 480 debug-release:
 481         $(call run, $(BR)/install-$(PLATFORM)-native,$(GDB) $(GDB_ARGS) --args)
 482
 483 build-vat:
 484         $(call make,$(PLATFORM)_debug,vpp-api-test-install)
 485
 486 run-vat:
 487         @$(SUDO) $(BR)/install-$(PLATFORM)_debug-native/vpp/bin/vpp_api_test
 488
 489 pkg-deb:
 490         $(call make,$(PLATFORM),install-deb)
 491
 492 pkg-rpm: dist
 493         make -C extras/rpm
 494
 495 pkg-srpm: dist
 496         make -C extras/rpm srpm
 497
 498 dpdk-install-dev:
 499         $(call banner,"This command is deprecated. Please use 'make install-ext-libs'")
 500         make -C build/external install-$(PKG)
 501
 502 install-ext-deps:
 503         make -C build/external install-$(PKG)
 504
 505 ctags: ctags.files
 506         @ctags --totals --tag-relative -L $<
 507         @rm $<
 508
 509 gtags: ctags
 510         @gtags --gtagslabel=ctags
 511
 512 cscope: cscope.files
 513         @cscope -b -q -v
 514
 515 checkstyle:
 516         @build-root/scripts/checkstyle.sh
 517
 518 fixstyle:
 519         @build-root/scripts/checkstyle.sh --fix
 520
 521 #
 522 # Build the documentation
 523 #
 524
 525 # Doxygen configuration and our utility scripts
 526 export DOXY_DIR ?= $(WS_ROOT)/doxygen
 527
 528 define make-doxy
 529         @OS_ID="$(OS_ID)" make -C $(DOXY_DIR) $@
 530 endef
 531
 532 .PHONY: bootstrap-doxygen doxygen wipe-doxygen
 533
 534 bootstrap-doxygen:
 535         $(call make-doxy)
 536
 537 doxygen:
 538         $(call make-doxy)
 539
 540 wipe-doxygen:
 541         $(call make-doxy)
 542
 543 # Sphinx Documents
 544 export DOCS_DIR = $(WS_ROOT)/docs
 545 export VENV_DIR = $(WS_ROOT)/sphinx_venv
 546 export SPHINX_SCRIPTS_DIR = $(WS_ROOT)/docs/scripts
 547
 548 .PHONY: docs-venv docs docs-clean
 549
 550 docs-venv:
 551         @($(SPHINX_SCRIPTS_DIR)/sphinx-make.sh venv)
 552
 553 docs: $(DOCS_DIR)
 554         @($(SPHINX_SCRIPTS_DIR)/sphinx-make.sh html)
 555
 556 docs-clean:
 557         @($(SPHINX_SCRIPTS_DIR)/sphinx-make.sh clean)
 558
 559 verify: install-dep $(BR)/.deps.ok install-ext-deps
 560         $(call banner,"Building for PLATFORM=vpp using gcc")
 561         @make -C build-root PLATFORM=vpp TAG=vpp wipe-all install-packages
 562         $(call banner,"Building sample-plugin")
 563         @make -C build-root PLATFORM=vpp TAG=vpp sample-plugin-install
 564         $(call banner,"Building libmemif")
 565         @make -C build-root PLATFORM=vpp TAG=vpp libmemif-install
 566         $(call banner,"Building JAPI")
 567         @make -C build-root PLATFORM=vpp TAG=vpp japi-install
 568         $(call banner,"Building VOM")
 569         @make -C build-root PLATFORM=vpp TAG=vpp vom-install
 570         $(call banner,"Building $(PKG) packages")
 571         @make pkg-$(PKG)
 572 ifeq ($(OS_ID)-$(OS_VERSION_ID),ubuntu-16.04)
 573         $(call banner,"Running tests")
 574         @make COMPRESS_FAILED_TEST_LOGS=yes RETRIES=3 test
 575 endif
 576
 577