dpdk/Makefile

   1 # Copyright (c) 2015 Cisco and/or its affiliates.
   2 # Licensed under the Apache License, Version 2.0 (the "License");
   3 # you may not use this file except in compliance with the License.
   4 # You may obtain a copy of the License at:
   5 #
   6 #     http://www.apache.org/licenses/LICENSE-2.0
   7 #
   8 # Unless required by applicable law or agreed to in writing, software
   9 # distributed under the License is distributed on an "AS IS" BASIS,
  10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  11 # See the License for the specific language governing permissions and
  12 # limitations under the License.
  13
  14 # Scripts require non-POSIX parts of bash
  15 SHELL := /bin/bash
  16
  17 DPDK_BUILD_DIR        ?= $(CURDIR)/_build
  18 DPDK_INSTALL_DIR      ?= $(CURDIR)/_install
  19 DPDK_PKTMBUF_HEADROOM ?= 128
  20 DPDK_CACHE_LINE_SIZE  ?= 64
  21 DPDK_DOWNLOAD_DIR     ?= $(HOME)/Downloads
  22 DPDK_DEBUG            ?= n
  23 DPDK_MLX4_PMD         ?= n
  24 DPDK_MLX5_PMD         ?= n
  25 DPDK_TAP_PMD          ?= n
  26 DPDK_FAILSAFE_PMD     ?= n
  27
  28 B := $(DPDK_BUILD_DIR)
  29 I := $(DPDK_INSTALL_DIR)
  30 DPDK_VERSION ?= 18.02.1
  31 PKG_SUFFIX ?= vpp1
  32 DPDK_BASE_URL ?= http://fast.dpdk.org/rel
  33 DPDK_TARBALL := dpdk-$(DPDK_VERSION).tar.xz
  34 DPDK_TAR_URL := $(DPDK_BASE_URL)/$(DPDK_TARBALL)
  35 DPDK_17.11_TARBALL_MD5_CKSUM := 53ee9e054a8797c9e67ffa0eb5d0c701
  36 DPDK_18.02.1_TARBALL_MD5_CKSUM := 3bbb5468f662e1f7472d4abc5c4cf08e
  37 DPDK_SOURCE := $(B)/dpdk-stable-$(DPDK_VERSION)
  38 MACHINE=$(shell uname -m)
  39
  40 NASM_BASE_URL := http://www.nasm.us/pub/nasm/releasebuilds
  41 NASM_VER := 2.13.01
  42 NASM_TARBALL := nasm-$(NASM_VER).tar.xz
  43 NASM_TAR_URL := $(NASM_BASE_URL)/$(NASM_VER)/$(NASM_TARBALL)
  44 NASM_SOURCE := $(B)/nasm-$(NASM_VER)
  45
  46 ifeq ($(DPDK_VERSION),17.11)
  47 IPSEC_MB_VER ?= 0.47
  48 else
  49 IPSEC_MB_VER ?= 0.48
  50 endif
  51
  52 ifeq ($(MACHINE),$(filter $(MACHINE),x86_64))
  53   AESNI ?= y
  54 $(info Building IPSec-MB $(IPSEC_MB_VER) library)
  55 else
  56   AESNI ?= N
  57 endif
  58
  59 AESNIMB_LIB_TARBALL := v$(IPSEC_MB_VER).tar.gz
  60 AESNIMB_LIB_TARBALL_URL := http://github.com/01org/intel-ipsec-mb/archive/$(AESNIMB_LIB_TARBALL)
  61 AESNIMB_LIB_SOURCE := $(B)/intel-ipsec-mb-$(IPSEC_MB_VER)
  62
  63 ifneq (,$(findstring clang,$(CC)))
  64 DPDK_CC=clang
  65 else ifneq (,$(findstring icc,$(CC)))
  66 DPDK_CC=icc
  67 else
  68 DPDK_CC=gcc
  69 endif
  70
  71 ##############################################################################
  72 # Intel x86
  73 ##############################################################################
  74 ifeq ($(MACHINE),$(filter $(MACHINE),x86_64 i686))
  75 DPDK_TARGET           ?= $(MACHINE)-native-linuxapp-$(DPDK_CC)
  76 DPDK_MACHINE          ?= nhm
  77 DPDK_TUNE             ?= core-avx2
  78
  79 ##############################################################################
  80 # ARM64
  81 ##############################################################################
  82 else ifeq ($(MACHINE),aarch64)
  83 CROSS :=
  84 export CROSS
  85 DPDK_TARGET           ?= arm64-armv8a-linuxapp-$(DPDK_CC)
  86 DPDK_MACHINE          ?= armv8a
  87 DPDK_TUNE             ?= generic
  88
  89 CPU_IMP_ARM                     = 0x41
  90 CPU_IMP_CAVIUM                  = 0x43
  91
  92 CPU_PART_ARM_CORTEX_A53         = 0xd03
  93 CPU_PART_ARM_CORTEX_A57         = 0xd07
  94 CPU_PART_ARM_CORTEX_A72         = 0xd08
  95 CPU_PART_ARM_CORTEX_A73         = 0xd09
  96
  97 CPU_PART_CAVIUM_THUNDERX        = 0x0a1
  98 CPU_PART_CAVIUM_THUNDERX_81XX   = 0x0a2
  99 CPU_PART_CAVIUM_THUNDERX_83XX   = 0x0a3
 100
 101 MIDR_IMPLEMENTER=$(shell awk '/implementer/ {print $$4;exit}' /proc/cpuinfo)
 102 MIDR_PARTNUM=$(shell awk '/part/ {print $$4;exit}' /proc/cpuinfo)
 103
 104 ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_ARM))
 105 ##############################################################################
 106 # Arm Cortex
 107 ##############################################################################
 108 CPU_PART_ARM_TUNE := $(CPU_PART_ARM_CORTEX_A53)/cortex-a53 \
 109                      $(CPU_PART_ARM_CORTEX_A57)/cortex-a57 \
 110                      $(CPU_PART_ARM_CORTEX_A72)/cortex-a72 \
 111                      $(CPU_PART_ARM_CORTEX_A73)/cortex-a73
 112 CPU_TUNE = $(notdir $(filter $(MIDR_PARTNUM)/%,$(CPU_PART_ARM_TUNE)))
 113 ifneq ($(CPU_TUNE),)
 114 DPDK_TUNE             = $(CPU_TUNE)
 115 else
 116 $(warning Unknown Arm CPU)
 117 endif
 118
 119 else ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_CAVIUM))
 120 ##############################################################################
 121 # Cavium ThunderX
 122 ##############################################################################
 123 ifneq (,$(findstring $(MIDR_PARTNUM),$(CPU_PART_CAVIUM_THUNDERX) \
 124         $(CPU_PART_CAVIUM_THUNDERX_81XX) $(CPU_PART_CAVIUM_THUNDERX_83XX)))
 125 DPDK_TARGET           = arm64-thunderx-linuxapp-$(DPDK_CC)
 126 DPDK_MACHINE          = thunderx
 127 else
 128 $(warning Unknown Cavium CPU)
 129 endif
 130 endif
 131
 132 ##############################################################################
 133 # Unknown platform
 134 ##############################################################################
 135 else
 136 $(error Unknown platform)
 137 endif
 138
 139 # /proc/cpuinfo does not exist on platforms without a /proc and on some
 140 # platforms, notably inside containers, it has no content. In those cases
 141 # we assume there's 1 processor; we use 2*ncpu for the -j option.
 142 # NB: GNU Make 4.2 will let us use '$(file </proc/cpuinfo)' to both test
 143 # for file presence and content; for now this will have to do.
 144 JOBS := $(if $(shell [ -f /proc/cpuinfo ] && head /proc/cpuinfo),\
 145         $(shell grep -c ^processor /proc/cpuinfo), 2)
 146
 147 # compiler/linker custom arguments
 148 DPDK_CPU_CFLAGS := -pie -fPIC
 149
 150 ifeq ($(DPDK_DEBUG),n)
 151 DPDK_EXTRA_CFLAGS := -g -mtune=$(DPDK_TUNE)
 152 else
 153 DPDK_EXTRA_CFLAGS := -g -O0
 154 endif
 155
 156 DPDK_MAKE_EXTRA_ARGS += AESNI_MULTI_BUFFER_LIB_PATH=$(AESNIMB_LIB_SOURCE)
 157
 158 # assemble DPDK make arguments
 159 DPDK_MAKE_ARGS := -C $(DPDK_SOURCE) -j $(JOBS) \
 160         T=$(DPDK_TARGET) \
 161         RTE_CONFIG_TEMPLATE=../custom-config \
 162         EXTRA_CFLAGS="$(DPDK_EXTRA_CFLAGS)" \
 163         EXTRA_LDFLAGS="$(DPDK_EXTRA_LDFLAGS)" \
 164         CPU_CFLAGS="$(DPDK_CPU_CFLAGS)" \
 165         DESTDIR=$(I) \
 166         $(DPDK_MAKE_EXTRA_ARGS)
 167
 168 define set
 169 @if grep -q CONFIG_$1 $@ ; \
 170         then sed -i -e 's/.*\(CONFIG_$1=\).*/\1$2/' $@ ; \
 171         else echo CONFIG_$1=$2 >> $@ ; \
 172 fi
 173 endef
 174
 175 all: build
 176
 177 $(B)/custom-config: $(B)/.patch.ok Makefile
 178         @echo --- generating custom config from $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) ---
 179         @cpp -undef -ffreestanding -x assembler-with-cpp $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) $@
 180         $(call set,RTE_MACHINE,$(DPDK_MACHINE))
 181         @# modify options
 182         $(call set,RTE_MAX_LCORE,256)
 183         $(call set,RTE_PKTMBUF_HEADROOM,$(DPDK_PKTMBUF_HEADROOM))
 184         $(call set,RTE_CACHE_LINE_SIZE,$(DPDK_CACHE_LINE_SIZE))
 185         $(call set,RTE_LIBEAL_USE_HPET,y)
 186         $(call set,RTE_BUILD_COMBINE_LIBS,y)
 187         $(call set,RTE_PCI_CONFIG,y)
 188         $(call set,RTE_PCI_EXTENDED_TAG,"on")
 189         $(call set,RTE_PCI_MAX_READ_REQUEST_SIZE,4096)
 190         @# enable debug init for device drivers
 191         $(call set,RTE_LIBRTE_I40E_DEBUG_INIT,$(DPDK_DEBUG))
 192         $(call set,RTE_LIBRTE_IXGBE_DEBUG_INIT,$(DPDK_DEBUG))
 193         $(call set,RTE_LIBRTE_E1000_DEBUG_INIT,$(DPDK_DEBUG))
 194         $(call set,RTE_LIBRTE_VIRTIO_DEBUG_INIT,$(DPDK_DEBUG))
 195         $(call set,RTE_LIBRTE_VMXNET3_DEBUG_INIT,$(DPDK_DEBUG))
 196         $(call set,RTE_LIBRTE_PMD_BOND,y)
 197         $(call set,RTE_LIBRTE_IP_FRAG,y)
 198         $(call set,RTE_LIBRTE_PMD_QAT,y)
 199         $(call set,RTE_LIBRTE_PMD_AESNI_MB,$(AESNI))
 200         $(call set,RTE_LIBRTE_PMD_AESNI_GCM,$(AESNI))
 201         $(call set,RTE_LIBRTE_MLX4_PMD,$(DPDK_MLX4_PMD))
 202         $(call set,RTE_LIBRTE_MLX5_PMD,$(DPDK_MLX5_PMD))
 203         $(call set,RTE_LIBRTE_MLX4_DLOPEN_DEPS,$(DPDK_MLX4_PMD))
 204         $(call set,RTE_LIBRTE_MLX5_DLOPEN_DEPS,$(DPDK_MLX5_PMD))
 205         $(call set,RTE_LIBRTE_PMD_TAP,$(DPDK_TAP_PMD))
 206         $(call set,RTE_LIBRTE_PMD_FAILSAFE,$(DPDK_FAILSAFE_PMD))
 207         @# not needed
 208         $(call set,RTE_LIBRTE_TIMER,n)
 209         $(call set,RTE_LIBRTE_CFGFILE,n)
 210         $(call set,RTE_LIBRTE_LPM,n)
 211         $(call set,RTE_LIBRTE_ACL,n)
 212         $(call set,RTE_LIBRTE_POWER,n)
 213         $(call set,RTE_LIBRTE_DISTRIBUTOR,n)
 214         $(call set,RTE_LIBRTE_PORT,n)
 215         $(call set,RTE_LIBRTE_TABLE,n)
 216         $(call set,RTE_LIBRTE_PIPELINE,n)
 217         $(call set,RTE_LIBRTE_FLOW_CLASSIFY,n)
 218         $(call set,RTE_KNI_KMOD,n)
 219         $(call set,RTE_EAL_IGB_UIO,n)
 220         @# currently broken in 18.02
 221         $(call set,RTE_LIBRTE_DPAA_BUS,n)
 222         $(call set,RTE_LIBRTE_DPAA_MEMPOOL,n)
 223         $(call set,RTE_LIBRTE_DPAA_PMD,n)
 224         $(call set,RTE_LIBRTE_PMD_DPAA_SEC,n)
 225         $(call set,RTE_LIBRTE_PMD_DPAA_EVENTDEV,n)
 226         @rm -f .config.ok
 227
 228 $(CURDIR)/$(DPDK_TARBALL):
 229         @if [ -e $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) ] ; \
 230                 then cp $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) $(CURDIR) ; \
 231                 else curl -o $(CURDIR)/$(DPDK_TARBALL) -LO $(DPDK_TAR_URL) ; \
 232         fi
 233         @rm -f $(B)/.download.ok
 234
 235 $(CURDIR)/$(NASM_TARBALL):
 236         @if [ -e $(DPDK_DOWNLOAD_DIR)/$(NASM_TARBALL) ] ; \
 237                 then cp $(DPDK_DOWNLOAD_DIR)/$(NASM_TARBALL) $(CURDIR) ; \
 238                 else curl -o $(CURDIR)/$(NASM_TARBALL) -LO $(NASM_TAR_URL) ; \
 239         fi
 240
 241 $(CURDIR)/$(AESNIMB_LIB_TARBALL):
 242         @if [ -e $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) ] ; \
 243                 then cp $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) $(CURDIR) ; \
 244                 else curl -o $@ -LO $(AESNIMB_LIB_TARBALL_URL) ; \
 245         fi
 246
 247 DPDK_DOWNLOADS = $(CURDIR)/$(DPDK_TARBALL)
 248 ifeq ($(AESNI),y)
 249 DPDK_DOWNLOADS += $(CURDIR)/$(NASM_TARBALL)
 250 DPDK_DOWNLOADS += $(CURDIR)/$(AESNIMB_LIB_TARBALL)
 251 endif
 252
 253 $(B)/.download.ok: $(DPDK_DOWNLOADS)
 254         @mkdir -p $(B)
 255         @openssl md5 $< | cut -f 2 -d " " - > $(B)/$(DPDK_TARBALL).md5sum
 256         @([ "$$(<$(B)/$(DPDK_TARBALL).md5sum)" = "$(DPDK_$(DPDK_VERSION)_TARBALL_MD5_CKSUM)" ] || \
 257         ( echo "Bad Checksum! Please remove $< and retry" && \
 258                 rm $(B)/$(DPDK_TARBALL).md5sum && false ))
 259         @touch $@
 260
 261 .PHONY: download
 262 download: $(B)/.download.ok
 263
 264 $(B)/.extract.ok: $(B)/.download.ok
 265         @echo --- extracting $(DPDK_TARBALL) ---
 266         @tar --directory $(B) --extract --file $(CURDIR)/$(DPDK_TARBALL)
 267 ifeq ($(AESNI),y)
 268         @echo --- extracting $(NASM_TARBALL) ---
 269         @tar --directory $(B) --extract --file $(CURDIR)/$(NASM_TARBALL)
 270         @echo --- extracting $(AESNIMB_LIB_TARBALL) ---
 271         @tar --directory $(B) --extract --file $(CURDIR)/$(AESNIMB_LIB_TARBALL)
 272 endif
 273         @touch $@
 274
 275 .PHONY: extract
 276 extract: $(B)/.extract.ok
 277
 278 $(B)/.patch.ok: $(B)/.extract.ok
 279 ifneq ($(wildcard $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch),)
 280         @echo --- patching ---
 281         @for f in $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch ; do \
 282                 echo Applying patch: $$(basename $$f) ; \
 283                 patch -p1 -d $(DPDK_SOURCE) < $$f ; \
 284         done
 285 endif
 286         @touch $@
 287
 288 .PHONY: patch
 289 patch: $(B)/.patch.ok
 290
 291 $(B)/.config.ok: $(B)/.patch.ok $(B)/custom-config
 292         @make $(DPDK_MAKE_ARGS) config
 293         @touch $@
 294
 295 .PHONY: config
 296 config: $(B)/.config.ok
 297
 298 .PHONY: build-nasm
 299 build-nasm:
 300         cd $(NASM_SOURCE) && sh configure && make -j
 301
 302 .PHONY: build-ipsec-mb
 303 build-ipsec-mb:
 304         mkdir -p $(I)/lib/
 305         # Do not build GCM stuff if we are building ISA_L
 306         make -C $(AESNIMB_LIB_SOURCE) -j \
 307           EXTRA_CFLAGS=-fPIC NASM=$(NASM_SOURCE)/nasm
 308         cp $(AESNIMB_LIB_SOURCE)/libIPSec_MB.a $(I)/lib/
 309
 310 .PHONY: build-dpdk
 311 build-dpdk:
 312         @if [ ! -e $(B)/.config.ok ] ; then echo 'Please run "make config" first' && false ; fi
 313         @make $(DPDK_MAKE_ARGS) install
 314
 315 # Order matters
 316 ifeq ($(AESNI),y)
 317 BUILD_TARGETS += build-nasm
 318 BUILD_TARGETS += build-ipsec-mb
 319 endif
 320 BUILD_TARGETS += build-dpdk
 321
 322 $(B)/.build.ok: $(BUILD_TARGETS)
 323         @touch $@
 324
 325 .PHONY: build
 326 build: $(B)/.build.ok
 327
 328 .PHONY: install
 329 install: $(B)/.build.ok
 330
 331 .PHONY: clean
 332 clean:
 333         @rm -rf $(B) $(I)
 334
 335 ##############################################################################
 336 # .deb packaging
 337 ##############################################################################
 338
 339 DEB_ARCH=$(shell dpkg --print-architecture 2> /dev/null)
 340 DEV_DEB=vpp-dpdk-dev_$(DPDK_VERSION)-$(PKG_SUFFIX)_$(DEB_ARCH).deb
 341 INSTALLED_DEB_VER=$(shell dpkg-query --showformat='$${Version}' --show vpp-dpdk-dev 2> /dev/null)
 342
 343 .PHONY: build-deb install-deb check-deb
 344
 345 deb/debian/changelog: Makefile
 346         @echo "vpp-dpdk ($(DPDK_VERSION)-$(PKG_SUFFIX)) unstable; urgency=low" > $@
 347         @echo "" >> $@
 348         @echo "  * DPDK Release $(DPDK_VERSION)" >> $@
 349         @echo "" >> $@
 350         @echo " -- VPP Dev <vpp-dev@lists.fd.io>  $(shell date -R)" >> $@
 351
 352 $(DEV_DEB): deb/debian/changelog
 353         @cd deb && dpkg-buildpackage -b -uc -us
 354         git clean -fdx deb
 355
 356 build-deb: $(DEV_DEB)
 357
 358 install-deb:
 359 ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
 360         @echo "=========================================================="
 361         @echo " Out of date DPDK package installed."
 362         @echo " Installed: $(INSTALLED_DEB_VER)"
 363         @echo " Needed: $(DPDK_VERSION)-$(PKG_SUFFIX)"
 364         @echo "=========================================================="
 365         @make $(DEV_DEB)
 366         @sudo dpkg -i $(DEV_DEB)
 367 else
 368         @echo "=========================================================="
 369         @echo " Up-to-date DPDK package already installed"
 370         @echo "=========================================================="
 371 endif
 372
 373 check-deb:
 374 ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
 375         @echo "=========================================================="
 376         @echo " Outdated DPDK package detected:"
 377         @echo "  Installed: vpp-dpdk-dev $(INSTALLED_DEB_VER)"
 378         @echo "  Current:   vpp-dpdk-dev $(DPDK_VERSION)-$(PKG_SUFFIX)"
 379         @echo ""
 380         @echo " Please upgrade by invoking 'make dpdk-install-dev'"
 381         @echo " from the top level directory."
 382         @echo "=========================================================="
 383 endif
 384
 385 ##############################################################################
 386 # .rpm packaging
 387 ##############################################################################
 388
 389 RPM_ARCH=$(shell rpm --eval "%{_arch}" 2> /dev/null)
 390 DEV_RPM=vpp-dpdk-devel-$(DPDK_VERSION)-$(PKG_SUFFIX).$(RPM_ARCH).rpm
 391 INSTALLED_RPM_VER=$(shell rpm -q --queryformat '%{VERSION}-%{RELEASE}' vpp-dpdk-devel 2> /dev/null | grep -v "not inst")
 392
 393 .PHONY: build-rpm install-rpm check-rpm
 394
 395 $(DEV_RPM): Makefile rpm/vpp-dpdk.spec
 396         @rpmbuild -bb \
 397           --define "_topdir $(CURDIR)/rpm" \
 398           --define "_version $(DPDK_VERSION)" \
 399           --define "_release $(PKG_SUFFIX)" \
 400           $(CURDIR)/rpm/vpp-dpdk.spec
 401         mv rpm/RPMS/$(RPM_ARCH)/*.rpm .
 402         git clean -fdx rpm
 403
 404 build-rpm: $(DEV_RPM)
 405
 406 install-rpm:
 407 ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
 408         @$(MAKE) $(DEV_RPM)
 409         sudo rpm -Uih $(DEV_RPM)
 410 else
 411         @echo "=========================================================="
 412         @echo " Up-to-date DPDK package already installed"
 413         @echo "=========================================================="
 414 endif
 415
 416 check-rpm:
 417 ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
 418         @echo "=========================================================="
 419         @echo " Outdated DPDK package detected:"
 420         @echo "  Installed: vpp-dpdk-devel $(INSTALLED_RPM_VER)"
 421         @echo "  Current:   vpp-dpdk-devel $(DPDK_VERSION)-$(PKG_SUFFIX)"
 422         @echo ""
 423         @echo " Please upgrade by invoking 'make dpdk-install-dev'"
 424         @echo " from the top level directory."
 425         @echo "=========================================================="
 426 endif
 427
 428 ##############################################################################
 429 # ebuild support
 430 ##############################################################################
 431
 432 .PHONY: ebuild-build ebuild-install
 433
 434 ebuild-build:
 435 ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),)
 436         @echo "=========================================================="
 437         @echo "Building DPDK from source. Consider installing development"
 438         @echo "package by invoking 'make dpdk-install-dev' from the"
 439         @echo "top level directory"
 440         @echo "=========================================================="
 441         make config
 442 else
 443 ifneq ($(INSTALLED_DEB_VER),)
 444         make check-deb
 445 endif
 446 ifneq ($(INSTALLED_RPM_VER),)
 447         make check-rpm
 448 endif
 449 endif
 450
 451 ebuild-install:
 452 ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),)
 453         make install
 454 endif