Use thread local storage for thread index
[vpp.git] / src / plugins / dpdk / ipsec / cli.c
1 /*
2  * Copyright (c) 2016 Intel and/or its affiliates.
3  * Licensed under the Apache License, Version 2.0 (the "License");
4  * you may not use this file except in compliance with the License.
5  * You may obtain a copy of the License at:
6  *
7  *     http://www.apache.org/licenses/LICENSE-2.0
8  *
9  * Unless required by applicable law or agreed to in writing, software
10  * distributed under the License is distributed on an "AS IS" BASIS,
11  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12  * See the License for the specific language governing permissions and
13  * limitations under the License.
14  */
15
16 #include <vnet/vnet.h>
17 #include <dpdk/device/dpdk.h>
18 #include <dpdk/ipsec/ipsec.h>
19
20 static void
21 dpdk_ipsec_show_mapping (vlib_main_t * vm, u16 detail_display)
22 {
23   dpdk_config_main_t *conf = &dpdk_config_main;
24   dpdk_crypto_main_t *dcm = &dpdk_crypto_main;
25   vlib_thread_main_t *tm = vlib_get_thread_main ();
26   u32 i, skip_master;
27
28   if (!conf->cryptodev)
29     {
30       vlib_cli_output (vm, "DPDK Cryptodev support is disabled\n");
31       return;
32     }
33
34   if (detail_display)
35     vlib_cli_output (vm, "worker\t%10s\t%15s\tdir\tdev\tqp\n",
36                      "cipher", "auth");
37   else
38     vlib_cli_output (vm, "worker\tcrypto device id(type)\n");
39
40   skip_master = vlib_num_workers () > 0;
41
42   for (i = 0; i < tm->n_vlib_mains; i++)
43     {
44       uword key, data;
45       u32 thread_index = vlib_mains[i]->thread_index;
46       crypto_worker_main_t *cwm = &dcm->workers_main[thread_index];
47       u8 *s = 0;
48
49       if (skip_master)
50         {
51           skip_master = 0;
52           continue;
53         }
54
55       if (!detail_display)
56         {
57           i32 last_cdev = -1;
58           crypto_qp_data_t *qpd;
59
60           s = format (s, "%u\t", thread_index);
61
62           /* *INDENT-OFF* */
63           vec_foreach (qpd, cwm->qp_data)
64             {
65               u32 dev_id = qpd->dev_id;
66
67               if ((u16) last_cdev != dev_id)
68                 {
69                   struct rte_cryptodev_info cdev_info;
70
71                   rte_cryptodev_info_get (dev_id, &cdev_info);
72
73                   s = format(s, "%u(%s)\t", dev_id, cdev_info.feature_flags &
74                              RTE_CRYPTODEV_FF_HW_ACCELERATED ? "HW" : "SW");
75                 }
76               last_cdev = dev_id;
77             }
78           /* *INDENT-ON* */
79           vlib_cli_output (vm, "%s", s);
80         }
81       else
82         {
83           char cipher_str[15], auth_str[15];
84           struct rte_cryptodev_capabilities cap;
85           crypto_worker_qp_key_t *p_key = (crypto_worker_qp_key_t *) & key;
86           /* *INDENT-OFF* */
87           hash_foreach (key, data, cwm->algo_qp_map,
88           ({
89             cap.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC;
90             cap.sym.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER;
91             cap.sym.cipher.algo = p_key->cipher_algo;
92             check_algo_is_supported (&cap, cipher_str);
93             cap.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC;
94             cap.sym.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH;
95             cap.sym.auth.algo = p_key->auth_algo;
96             check_algo_is_supported (&cap, auth_str);
97             vlib_cli_output (vm, "%u\t%10s\t%15s\t%3s\t%u\t%u\n",
98                              vlib_mains[i]->thread_index, cipher_str, auth_str,
99                              p_key->is_outbound ? "out" : "in",
100                              cwm->qp_data[data].dev_id,
101                              cwm->qp_data[data].qp_id);
102           }));
103           /* *INDENT-ON* */
104         }
105     }
106 }
107
108 static clib_error_t *
109 lcore_cryptodev_map_fn (vlib_main_t * vm, unformat_input_t * input,
110                         vlib_cli_command_t * cmd)
111 {
112   unformat_input_t _line_input, *line_input = &_line_input;
113   u16 detail = 0;
114   clib_error_t *error = NULL;
115
116   if (!unformat_user (input, unformat_line_input, line_input))
117     return 0;
118
119   while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
120     {
121       if (unformat (line_input, "verbose"))
122         detail = 1;
123       else
124         {
125           error = clib_error_return (0, "parse error: '%U'",
126                                      format_unformat_error, line_input);
127           goto done;
128         }
129     }
130
131   dpdk_ipsec_show_mapping (vm, detail);
132
133 done:
134   unformat_free (line_input);
135
136   return error;
137 }
138
139 /*?
140  * This command is used to display the DPDK Crypto device data. See
141  * @ref dpdk_crypto_ipsec_doc for more details on initializing the
142  * DPDK Crypto device.
143  *
144  * @cliexpar
145  * Example of displaying the DPDK Crypto device data when disabled:
146  * @cliexstart{show crypto device mapping}
147  * DPDK Cryptodev support is disabled
148  * @cliexend
149  * Example of displaying the DPDK Crypto device data when enabled:
150  * @cliexstart{show crypto device mapping}
151  * worker  crypto device id(type)
152  * 1       1(SW)
153  * 2       1(SW)
154  * @cliexend
155  * Example of displaying the DPDK Crypto device data when enabled with verbose:
156  * @cliexstart{show crypto device mapping verbose}
157  * worker      cipher                 auth dir     dev     qp
158  * 1          AES_CTR         AES-XCBC-MAC  in     1       0
159  * 1          AES_CTR          HMAC-SHA384  in     1       0
160  * 1          AES_CTR          HMAC-SHA384 out     1       1
161  * 1          AES_CBC          HMAC-SHA512  in     1       0
162  * 1          AES_CBC          HMAC-SHA256  in     1       0
163  * 1          AES_CBC         AES-XCBC-MAC out     1       1
164  * 1          AES_CTR         AES-XCBC-MAC out     1       1
165  * 1          AES_CBC          HMAC-SHA256 out     1       1
166  * 1          AES_CTR          HMAC-SHA512 out     1       1
167  * 1          AES_CTR          HMAC-SHA256  in     1       0
168  * 1          AES_CTR            HMAC-SHA1  in     1       0
169  * 1          AES_CBC          HMAC-SHA512 out     1       1
170  * 1          AES_CBC          HMAC-SHA384 out     1       1
171  * 1          AES_CTR            HMAC-SHA1 out     1       1
172  * 1          AES_CTR          HMAC-SHA256 out     1       1
173  * 1          AES_CBC            HMAC-SHA1  in     1       0
174  * 1          AES_CBC         AES-XCBC-MAC  in     1       0
175  * 1          AES_CTR          HMAC-SHA512  in     1       0
176  * 1          AES_CBC            HMAC-SHA1 out     1       1
177  * 1          AES_CBC          HMAC-SHA384  in     1       0
178  * 2          AES_CTR         AES-XCBC-MAC  in     1       2
179  * 2          AES_CTR          HMAC-SHA384  in     1       2
180  * 2          AES_CTR          HMAC-SHA384 out     1       3
181  * 2          AES_CBC          HMAC-SHA512  in     1       2
182  * 2          AES_CBC          HMAC-SHA256  in     1       2
183  * 2          AES_CBC         AES-XCBC-MAC out     1       3
184  * 2          AES_CTR         AES-XCBC-MAC out     1       3
185  * 2          AES_CBC          HMAC-SHA256 out     1       3
186  * 2          AES_CTR          HMAC-SHA512 out     1       3
187  * 2          AES_CTR          HMAC-SHA256  in     1       2
188  * 2          AES_CTR            HMAC-SHA1  in     1       2
189  * 2          AES_CBC          HMAC-SHA512 out     1       3
190  * 2          AES_CBC          HMAC-SHA384 out     1       3
191  * 2          AES_CTR            HMAC-SHA1 out     1       3
192  * 2          AES_CTR          HMAC-SHA256 out     1       3
193  * 2          AES_CBC            HMAC-SHA1  in     1       2
194  * 2          AES_CBC         AES-XCBC-MAC  in     1       2
195  * 2          AES_CTR          HMAC-SHA512  in     1       2
196  * 2          AES_CBC            HMAC-SHA1 out     1       3
197  * 2          AES_CBC          HMAC-SHA384  in     1       2
198  * @cliexend
199 ?*/
200 /* *INDENT-OFF* */
201 VLIB_CLI_COMMAND (lcore_cryptodev_map, static) = {
202     .path = "show crypto device mapping",
203     .short_help =
204     "show cryptodev device mapping [verbose]",
205     .function = lcore_cryptodev_map_fn,
206 };
207 /* *INDENT-ON* */
208
209 /*
210  * fd.io coding-style-patch-verification: ON
211  *
212  * Local Variables:
213  * eval: (c-set-style "gnu")
214  * End:
215  */