vlib: prevent some signals from being executed on workers
[vpp.git] / src / vcl / ldp_glibc_socket.h
1 /*
2  * Copyright (c) 2017-2019 Cisco and/or its affiliates.
3  * Licensed under the Apache License, Version 2.0 (the "License");
4  * you may not use this file except in compliance with the License.
5  * You may obtain a copy of the License at:
6  *
7  *     http://www.apache.org/licenses/LICENSE-2.0
8  *
9  * Unless required by applicable law or agreed to in writing, software
10  * distributed under the License is distributed on an "AS IS" BASIS,
11  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12  * See the License for the specific language governing permissions and
13  * limitations under the License.
14  */
15
16 #ifndef included_ldp_glibc_socket_h
17 #define included_ldp_glibc_socket_h
18
19 #include <sys/types.h>
20 #include <sys/socket.h>
21 #include <sys/select.h>
22 #include <arpa/inet.h>
23 #include <fcntl.h>
24
25 #include <sys/epoll.h>
26
27 #include <signal.h>
28 #include <poll.h>
29
30 /*
31  *
32  * Generic glibc fd api
33  *
34  */
35 /*
36  * glibc APIs from <unistd.h>
37  */
38
39 /* Close the file descriptor FD.
40
41    This function is a cancellation point and therefore not marked with
42    __THROW.  */
43 extern int close (int __fd);
44
45 /* Read NBYTES into BUF from FD.  Return the
46    number read, -1 for errors or 0 for EOF.
47
48    This function is a cancellation point and therefore not marked with
49    __THROW.  */
50 extern ssize_t __wur read (int __fd, void *__buf, size_t __nbytes);
51
52 /* Write N bytes of BUF to FD.  Return the number written, or -1.
53
54    This function is a cancellation point and therefore not marked with
55    __THROW.  */
56 extern ssize_t __wur write (int __fd, const void *__buf, size_t __n);
57
58
59 /*
60  * glibc APIs from <fcntl.h>
61  */
62
63 /* Do the file control operation described by CMD on FD.
64    The remaining arguments are interpreted depending on CMD.
65
66    This function is a cancellation point and therefore not marked with
67    __THROW.  */
68 extern int fcntl (int __fd, int __cmd, ...);
69
70
71 /*
72  * glibc APIs from <sys/select.h>
73  */
74
75 /* Check the first NFDS descriptors each in READFDS (if not NULL) for read
76    readiness, in WRITEFDS (if not NULL) for write readiness, and in EXCEPTFDS
77    (if not NULL) for exceptional conditions.  If TIMEOUT is not NULL, time out
78    after waiting the interval specified therein.  Returns the number of ready
79    descriptors, or -1 for errors.
80
81
82    This function is a cancellation point and therefore not marked with
83    __THROW.  */
84 extern int
85 select (int __nfds, fd_set * __restrict __readfds,
86         fd_set * __restrict __writefds,
87         fd_set * __restrict __exceptfds,
88         struct timeval *__restrict __timeout);
89
90 #ifdef __USE_XOPEN2K
91 /* Same as above only that the TIMEOUT value is given with higher
92    resolution and a sigmask which is been set temporarily.  This version
93    should be used.
94
95    This function is a cancellation point and therefore not marked with
96    __THROW.  */
97 extern int
98 pselect (int __nfds, fd_set * __restrict __readfds,
99          fd_set * __restrict __writefds,
100          fd_set * __restrict __exceptfds,
101          const struct timespec *__restrict __timeout,
102          const __sigset_t * __restrict __sigmask);
103 #endif
104
105
106 /*
107  *
108  * Socket specific glibc api
109  *
110  */
111
112 /*
113  * glibc APIs from <sys/socket.h>
114  */
115
116 /* Create a new socket of type TYPE in domain DOMAIN, using
117    protocol PROTOCOL.  If PROTOCOL is zero, one is chosen automatically.
118    Returns a file descriptor for the new socket, or -1 for errors.  */
119 extern int __THROW socket (int __domain, int __type, int __protocol);
120
121 /* Create two new sockets, of type TYPE in domain DOMAIN and using
122    protocol PROTOCOL, which are connected to each other, and put file
123    descriptors for them in FDS[0] and FDS[1].  If PROTOCOL is zero,
124    one will be chosen automatically.  Returns 0 on success, -1 for errors.  */
125 extern int __THROW
126 socketpair (int __domain, int __type, int __protocol, int __fds[2]);
127
128 /* Give the socket FD the local address ADDR (which is LEN bytes long).  */
129 extern int __THROW
130 bind (int __fd, __CONST_SOCKADDR_ARG __addr, socklen_t __len);
131
132 /* Put the local address of FD into *ADDR and its length in *LEN.  */
133 extern int __THROW
134 getsockname (int __fd, __SOCKADDR_ARG __addr, socklen_t * __restrict __len);
135
136 /* Open a connection on socket FD to peer at ADDR (which LEN bytes long).
137    For connectionless socket types, just set the default address to send to
138    and the only address from which to accept transmissions.
139    Return 0 on success, -1 for errors.
140
141    This function is a cancellation point and therefore not marked with
142    __THROW.  */
143 extern int connect (int __fd, __CONST_SOCKADDR_ARG __addr, socklen_t __len);
144
145 /* Put the address of the peer connected to socket FD into *ADDR
146    (which is *LEN bytes long), and its actual length into *LEN.  */
147 extern int __THROW
148 getpeername (int __fd, __SOCKADDR_ARG __addr, socklen_t * __restrict __len);
149
150 /* Send N bytes of BUF to socket FD.  Returns the number sent or -1.
151
152    This function is a cancellation point and therefore not marked with
153    __THROW.  */
154 extern ssize_t send (int __fd, const void *__buf, size_t __n, int __flags);
155
156 extern ssize_t sendfile (int __out_fd, int __in_fd, off_t * __offset,
157                          size_t __len);
158
159 /* Read N bytes into BUF from socket FD.
160    Returns the number read or -1 for errors.
161
162    This function is a cancellation point and therefore not marked with
163    __THROW.  */
164 extern ssize_t recv (int __fd, void *__buf, size_t __n, int __flags);
165
166 /* Read N bytes into BUF from socket FD with buffer overflow checking.
167    Returns the number read or -1 for errors.
168
169    This function is a cancellation point and therefore not marked with
170    __THROW.  */
171 extern ssize_t __recv_chk (int fd, void *buf, size_t n, size_t buflen,
172                            int flags);
173
174 /* Send N bytes of BUF on socket FD to peer at address ADDR (which is
175    ADDR_LEN bytes long).  Returns the number sent, or -1 for errors.
176
177    This function is a cancellation point and therefore not marked with
178    __THROW.  */
179 extern ssize_t
180 sendto (int __fd, const void *__buf, size_t __n,
181         int __flags, __CONST_SOCKADDR_ARG __addr, socklen_t __addr_len);
182
183 /* Read N bytes into BUF through socket FD.
184    If ADDR is not NULL, fill in *ADDR_LEN bytes of it with tha address of
185    the sender, and store the actual size of the address in *ADDR_LEN.
186    Returns the number of bytes read or -1 for errors.
187
188    This function is a cancellation point and therefore not marked with
189    __THROW.  */
190 extern ssize_t
191 recvfrom (int __fd, void *__restrict __buf,
192           size_t __n, int __flags,
193           __SOCKADDR_ARG __addr, socklen_t * __restrict __addr_len);
194
195 /* Send a message described MESSAGE on socket FD.
196    Returns the number of bytes sent, or -1 for errors.
197
198    This function is a cancellation point and therefore not marked with
199    __THROW.  */
200 extern ssize_t
201 sendmsg (int __fd, const struct msghdr *__message, int __flags);
202
203 #ifdef _GNU_SOURCE
204 /* Send a VLEN messages as described by VMESSAGES to socket FD.
205    Returns the number of datagrams successfully written or -1 for errors.
206
207    This function is a cancellation point and therefore not marked with
208    __THROW.  */
209 extern int sendmmsg (int __fd, struct mmsghdr *__vmessages,
210                      unsigned int __vlen, int __flags);
211 #endif
212
213 /* Receive a message as described by MESSAGE from socket FD.
214    Returns the number of bytes read or -1 for errors.
215
216    This function is a cancellation point and therefore not marked with
217    __THROW.  */
218 extern ssize_t recvmsg (int __fd, struct msghdr *__message, int __flags);
219
220 #ifdef _GNU_SOURCE
221 /* Receive up to VLEN messages as described by VMESSAGES from socket FD.
222    Returns the number of messages received or -1 for errors.
223
224    This function is a cancellation point and therefore not marked with
225    __THROW.  */
226 extern int
227 recvmmsg (int __fd, struct mmsghdr *__vmessages,
228           unsigned int __vlen, int __flags, struct timespec *__tmo);
229 #endif
230
231
232 /* Put the current value for socket FD's option OPTNAME at protocol level LEVEL
233    into OPTVAL (which is *OPTLEN bytes long), and set *OPTLEN to the value's
234    actual length.  Returns 0 on success, -1 for errors.  */
235 extern int __THROW
236 getsockopt (int __fd, int __level, int __optname,
237             void *__restrict __optval, socklen_t * __restrict __optlen);
238
239 /* Set socket FD's option OPTNAME at protocol level LEVEL
240    to *OPTVAL (which is OPTLEN bytes long).
241    Returns 0 on success, -1 for errors.  */
242 extern int __THROW
243 setsockopt (int __fd, int __level, int __optname,
244             const void *__optval, socklen_t __optlen);
245
246 /* Prepare to accept connections on socket FD.
247    N connection requests will be queued before further requests are refused.
248    Returns 0 on success, -1 for errors.  */
249 extern int __THROW listen (int __fd, int __n);
250
251 /* Await a connection on socket FD.
252    When a connection arrives, open a new socket to communicate with it,
253    set *ADDR (which is *ADDR_LEN bytes long) to the address of the connecting
254    peer and *ADDR_LEN to the address's actual length, and return the
255    new socket's descriptor, or -1 for errors.
256
257    This function is a cancellation point and therefore not marked with
258    __THROW.  */
259 extern int
260 accept (int __fd, __SOCKADDR_ARG __addr, socklen_t * __restrict __addr_len);
261
262 /* Similar to 'accept' but takes an additional parameter to specify flags.
263
264    This function is a cancellation point and therefore not marked with
265    __THROW.  */
266      /* TBD: implemented later */
267 extern int
268 accept4 (int __fd, __SOCKADDR_ARG __addr,
269          socklen_t * __restrict __addr_len, int __flags);
270
271 /* Shut down all or part of the connection open on socket FD.
272    HOW determines what to shut down:
273      SHUT_RD   = No more receptions;
274      SHUT_WR   = No more transmissions;
275      SHUT_RDWR = No more receptions or transmissions.
276    Returns 0 on success, -1 for errors.  */
277 extern int __THROW shutdown (int __fd, int __how);
278
279
280 /*
281  * glibc APIs from <sys/epoll.h>
282  */
283
284 /* Creates an epoll instance.  Returns an fd for the new instance.
285    The "size" parameter is a hint specifying the number of file
286    descriptors to be associated with the new instance.  The fd
287    returned by epoll_create() should be closed with close().  */
288 extern int __THROW epoll_create (int __size);
289
290 /* Same as epoll_create but with an FLAGS parameter.  The unused SIZE
291    parameter has been dropped.  */
292 extern int __THROW epoll_create1 (int __flags);
293
294 /* Manipulate an epoll instance "epfd". Returns 0 in case of success,
295    -1 in case of error ( the "errno" variable will contain the
296    specific error code ) The "op" parameter is one of the EPOLL_CTL_*
297    constants defined above. The "fd" parameter is the target of the
298    operation. The "event" parameter describes which events the caller
299    is interested in and any associated user data.  */
300 extern int __THROW
301 epoll_ctl (int __epfd, int __op, int __fd, struct epoll_event *__event);
302
303 #define EP_INT_MAX ((int)(~0U>>1))
304 #define EP_MAX_EVENTS (EP_INT_MAX / sizeof(struct epoll_event))
305
306 /* Wait for events on an epoll instance "epfd". Returns the number of
307    triggered events returned in "events" buffer. Or -1 in case of
308    error with the "errno" variable set to the specific error code. The
309    "events" parameter is a buffer that will contain triggered
310    events. The "maxevents" is the maximum number of events to be
311    returned ( usually size of "events" ). The "timeout" parameter
312    specifies the maximum wait time in milliseconds (-1 == infinite).
313
314    This function is a cancellation point and therefore not marked with
315    __THROW.  */
316 extern int
317 epoll_wait (int __epfd, struct epoll_event *__events,
318             int __maxevents, int __timeout);
319
320 /* Same as epoll_wait, but the thread's signal mask is temporarily
321    and atomically replaced with the one provided as parameter.
322
323    This function is a cancellation point and therefore not marked with
324    __THROW.  */
325 extern int
326 epoll_pwait (int __epfd, struct epoll_event *__events,
327              int __maxevents, int __timeout, const __sigset_t * __ss);
328
329 /* Poll the file descriptors described by the NFDS structures starting at
330    FDS.  If TIMEOUT is nonzero and not -1, allow TIMEOUT milliseconds for
331    an event to occur; if TIMEOUT is -1, block until an event occurs.
332    Returns the number of file descriptors with events, zero if timed out,
333    or -1 for errors.
334
335    This function is a cancellation point and therefore not marked with
336    __THROW.  */
337 extern int poll (struct pollfd *__fds, nfds_t __nfds, int __timeout);
338
339 #ifdef _GNU_SOURCE
340 /* Like poll, but before waiting the threads signal mask is replaced
341    with that specified in the fourth parameter.  For better usability,
342    the timeout value is specified using a TIMESPEC object.
343
344    This function is a cancellation point and therefore not marked with
345    __THROW.  */
346 extern int ppoll (struct pollfd *__fds, nfds_t __nfds,
347                   const struct timespec *__timeout, const __sigset_t * __ss);
348 #endif
349
350
351 #endif /* included_ldp_glibc_socket_h */
352
353 /*
354  * fd.io coding-style-patch-verification: ON
355  *
356  * Local Variables:
357  * eval: (c-set-style "gnu")
358  * End:
359  */