fib: format functions for path
[vpp.git] / src / vnet / fib / fib_types.h
1  /*
2  * Copyright (c) 2016 Cisco and/or its affiliates.
3  * Licensed under the Apache License, Version 2.0 (the "License");
4  * you may not use this file except in compliance with the License.
5  * You may obtain a copy of the License at:
6  *
7  *     http://www.apache.org/licenses/LICENSE-2.0
8  *
9  * Unless required by applicable law or agreed to in writing, software
10  * distributed under the License is distributed on an "AS IS" BASIS,
11  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12  * See the License for the specific language governing permissions and
13  * limitations under the License.
14  */
15
16 #ifndef __FIB_TYPES_H__
17 #define __FIB_TYPES_H__
18
19 #include <stdbool.h>
20 #include <vlib/vlib.h>
21 #include <vnet/ip/ip46_address.h>
22 #include <vnet/mpls/packet.h>
23 #include <vnet/dpo/dpo.h>
24 #include <vnet/bier/bier_types.h>
25
26 /**
27  * A typedef of a node index.
28  * we make this typedef so the code becomes easier for a human to parse.
29  */
30 typedef u32 fib_node_index_t;
31 #define FIB_NODE_INDEX_INVALID ((fib_node_index_t)(~0))
32
33 /**
34  * Protocol Type. packed so it consumes a u8 only
35  */
36 typedef enum fib_protocol_t_ {
37     FIB_PROTOCOL_IP4 = DPO_PROTO_IP4,
38     FIB_PROTOCOL_IP6 = DPO_PROTO_IP6,
39     FIB_PROTOCOL_MPLS = DPO_PROTO_MPLS,
40 }  __attribute__ ((packed)) fib_protocol_t;
41
42 #define FIB_PROTOCOLS {                 \
43     [FIB_PROTOCOL_IP4] = "ipv4",        \
44     [FIB_PROTOCOL_IP6] = "ipv6",        \
45     [FIB_PROTOCOL_MPLS] = "MPLS",       \
46 }
47
48 /**
49  * Definition outside of enum so it does not need to be included in non-defaulted
50  * switch statements
51  */
52 #define FIB_PROTOCOL_MAX (FIB_PROTOCOL_MPLS + 1)
53
54 /**
55  * Definition outside of enum so it does not need to be included in non-defaulted
56  * switch statements
57  */
58 #define FIB_PROTOCOL_IP_MAX (FIB_PROTOCOL_IP6 + 1)
59
60 /**
61  * Not part of the enum so it does not have to be handled in switch statements
62  */
63 #define FIB_PROTOCOL_NONE (FIB_PROTOCOL_MAX+1)
64
65 #define FOR_EACH_FIB_PROTOCOL(_item)    \
66     for (_item = FIB_PROTOCOL_IP4;      \
67          _item <= FIB_PROTOCOL_MPLS;    \
68          _item++)
69
70 #define FOR_EACH_FIB_IP_PROTOCOL(_item)    \
71     for (_item = FIB_PROTOCOL_IP4;         \
72          _item <= FIB_PROTOCOL_IP6;        \
73          _item++)
74
75 /**
76  * @brief Convert from boolean is_ip6 to FIB protocol.
77  * Drop MPLS on the floor in favor of IPv4.
78  */
79 static inline fib_protocol_t
80 fib_ip_proto(bool is_ip6)
81 {
82   return (is_ip6) ? FIB_PROTOCOL_IP6 : FIB_PROTOCOL_IP4;
83 }
84
85 /**
86  * @brief Convert from fib_protocol to ip46_type
87  */
88 extern ip46_type_t fib_proto_to_ip46(fib_protocol_t fproto);
89
90 /**
91  * @brief Convert from ip46_type to fib_protocol
92  */
93 extern fib_protocol_t fib_proto_from_ip46(ip46_type_t iproto);
94
95 /**
96  * @brief Convert from a protocol to a link type
97  */
98 vnet_link_t fib_proto_to_link (fib_protocol_t proto);
99
100 /**
101  * FIB output chain type. When a child object requests a forwarding contribution
102  * from a parent, it does so for a particular scenario. This enumererates those
103  * sceanrios
104  */
105 typedef enum fib_forward_chain_type_t_ {
106     /**
107      * Contribute an object that is to be used to forward IP4 packets
108      */
109     FIB_FORW_CHAIN_TYPE_UNICAST_IP4,
110     /**
111      * Contribute an object that is to be used to forward IP6 packets
112      */
113     FIB_FORW_CHAIN_TYPE_UNICAST_IP6,
114     /**
115      * Contribute an object that is to be used to forward non-end-of-stack
116      * MPLS packets
117      */
118     FIB_FORW_CHAIN_TYPE_MPLS_NON_EOS,
119     /**
120      * Contribute an object that is to be used to forward BIER packets.
121      */
122     FIB_FORW_CHAIN_TYPE_BIER,
123     /**
124      * Contribute an object that is to be used to forward end-of-stack
125      * MPLS packets. This is a convenient ID for clients. A real EOS chain
126      * must be pay-load protocol specific. This
127      * option is converted into one of the other three internally.
128      */
129     FIB_FORW_CHAIN_TYPE_MPLS_EOS,
130     /**
131      * Contribute an object that is to be used to forward IP4 packets
132      */
133     FIB_FORW_CHAIN_TYPE_MCAST_IP4,
134     /**
135      * Contribute an object that is to be used to forward IP6 packets
136      */
137     FIB_FORW_CHAIN_TYPE_MCAST_IP6,
138     /**
139      * Contribute an object that is to be used to forward Ethernet packets.
140      */
141     FIB_FORW_CHAIN_TYPE_ETHERNET,
142     /**
143      * Contribute an object that is to be used to forward NSH packets.
144      * This is last in the list since it is not valid for many FIB objects,
145      * and thus their array of per-chain-type DPOs can be sized smaller.
146      */
147     FIB_FORW_CHAIN_TYPE_NSH,
148 }  __attribute__ ((packed)) fib_forward_chain_type_t;
149
150 #define FIB_FORW_CHAINS {                                       \
151     [FIB_FORW_CHAIN_TYPE_ETHERNET]      = "ethernet",           \
152     [FIB_FORW_CHAIN_TYPE_BIER]          = "bier",               \
153     [FIB_FORW_CHAIN_TYPE_UNICAST_IP4]   = "unicast-ip4",        \
154     [FIB_FORW_CHAIN_TYPE_UNICAST_IP6]   = "unicast-ip6",        \
155     [FIB_FORW_CHAIN_TYPE_MCAST_IP4]     = "multicast-ip4",      \
156     [FIB_FORW_CHAIN_TYPE_MCAST_IP6]     = "multicast-ip6",      \
157     [FIB_FORW_CHAIN_TYPE_MPLS_NON_EOS]  = "mpls-neos",          \
158     [FIB_FORW_CHAIN_TYPE_MPLS_EOS]      = "mpls-eos",           \
159     [FIB_FORW_CHAIN_TYPE_NSH]           = "nsh",                \
160 }
161
162 #define FIB_FORW_CHAIN_NUM (FIB_FORW_CHAIN_TYPE_NSH+1)
163 #define FIB_FORW_CHAIN_MPLS_NUM (FIB_FORW_CHAIN_TYPE_MPLS_EOS+1)
164
165 #define FOR_EACH_FIB_FORW_CHAIN(_item)                    \
166     for (_item = FIB_FORW_CHAIN_TYPE_UNICAST_IP4;         \
167          _item <= FIB_FORW_CHAIN_TYPE_NSH;                \
168          _item++)
169
170 #define FOR_EACH_FIB_FORW_MPLS_CHAIN(_item)               \
171     for (_item = FIB_FORW_CHAIN_TYPE_UNICAST_IP4;         \
172          _item <= FIB_FORW_CHAIN_TYPE_MPLS_EOS;           \
173          _item++)
174
175 /**
176  * @brief Convert from a chain type to the adjacency's link type
177  */
178 extern vnet_link_t fib_forw_chain_type_to_link_type(fib_forward_chain_type_t fct);
179
180 /**
181  * @brief Convert from a adjacency's link type to chain type
182  */
183 extern fib_forward_chain_type_t fib_forw_chain_type_from_link_type(vnet_link_t lt);
184
185 /**
186  * @brief Convert from a payload-protocol to a chain type.
187  */
188 extern fib_forward_chain_type_t fib_forw_chain_type_from_dpo_proto(dpo_proto_t proto);
189
190 /**
191  * @brief Convert from a fib-protocol to a chain type.
192  */
193 extern fib_forward_chain_type_t fib_forw_chain_type_from_fib_proto(fib_protocol_t proto);
194
195 /**
196  * @brief Convert from a chain type to the DPO proto it will install
197  */
198 extern dpo_proto_t fib_forw_chain_type_to_dpo_proto(fib_forward_chain_type_t fct);
199
200 /**
201  * Aggregate type for a prefix
202  */
203 typedef struct fib_prefix_t_ {
204     /**
205      * The mask length
206      */
207     u16 fp_len;
208
209     /**
210      * protocol type
211      */
212     fib_protocol_t fp_proto;
213
214     /**
215      * Pad to keep the address 4 byte aligned
216      */
217     u8 ___fp___pad;
218
219     union {
220         /**
221          * The address type is not deriveable from the fp_addr member.
222          * If it's v4, then the first 3 u32s of the address will be 0.
223          * v6 addresses (even v4 mapped ones) have at least 2 u32s assigned
224          * to non-zero values. true. but when it's all zero, one cannot decide.
225          */
226         ip46_address_t fp_addr;
227
228         struct {
229             mpls_label_t fp_label;
230             mpls_eos_bit_t fp_eos;
231             /**
232              * This protocol determines the payload protocol of packets
233              * that will be forwarded by this entry once the label is popped.
234              * For a non-eos entry it will be MPLS.
235              */
236             dpo_proto_t fp_payload_proto;
237         };
238     };
239 } fib_prefix_t;
240
241 STATIC_ASSERT(STRUCT_OFFSET_OF(fib_prefix_t, fp_addr) == 4,
242               "FIB Prefix's address is 4 byte aligned.");
243
244 /**
245  * \brief Compare two prefixes for equality
246  */
247 extern int fib_prefix_cmp(const fib_prefix_t *p1,
248                           const fib_prefix_t *p2);
249
250 /**
251  * \brief Copy a prefix
252  */
253 extern void fib_prefix_copy(fib_prefix_t *dst,
254                             const fib_prefix_t *src);
255
256 /**
257  * \brief Compare two prefixes for covering relationship
258  *
259  * \return non-zero if the first prefix is a cover for the second
260  */
261 extern int fib_prefix_is_cover(const fib_prefix_t *p1,
262                                const fib_prefix_t *p2);
263
264 /**
265  * \brief Return true is the prefix is a host prefix
266  */
267 extern int fib_prefix_is_host(const fib_prefix_t *p);
268 extern u8 fib_prefix_get_host_length (fib_protocol_t proto);
269
270 /**
271  * \brief Host prefix from ip
272  */
273 extern void fib_prefix_from_ip46_addr (const ip46_address_t *addr,
274                            fib_prefix_t *pfx);
275
276 extern u8 * format_fib_prefix(u8 * s, va_list * args);
277 extern u8 * format_fib_forw_chain_type(u8 * s, va_list * args);
278
279 extern dpo_proto_t fib_proto_to_dpo(fib_protocol_t fib_proto);
280 extern fib_protocol_t dpo_proto_to_fib(dpo_proto_t dpo_proto);
281
282 /**
283  * Convert from BIER next-hop proto to FIB proto
284  */
285 extern fib_protocol_t bier_hdr_proto_to_fib(bier_hdr_proto_id_t bproto);
286
287 /**
288  * Enurmeration of special path/entry types
289  */
290 typedef enum fib_special_type_t_ {
291     /**
292      * Marker. Add new types after this one.
293      */
294     FIB_SPECIAL_TYPE_FIRST = 0,
295     /**
296      * Local/for-us paths
297      */
298     FIB_SPECIAL_TYPE_LOCAL = FIB_SPECIAL_TYPE_FIRST,
299     /**
300      * drop paths
301      */
302     FIB_SPECIAL_TYPE_DROP,
303     /**
304      * Marker. Add new types before this one, then update it.
305      */
306     FIB_SPECIAL_TYPE_LAST = FIB_SPECIAL_TYPE_DROP,
307 } __attribute__ ((packed)) fib_special_type_t;
308
309 /**
310  * The maximum number of types
311  */
312 #define FIB_SPEICAL_TYPE_MAX (FIB_SPEICAL_TYPE_LAST + 1)
313
314 #define FOR_EACH_FIB_SPEICAL_TYPE(_item)                \
315     for (_item = FIB_TYPE_SPEICAL_FIRST;                \
316          _item <= FIB_SPEICAL_TYPE_LAST; _item++)
317
318 extern u8 * format_fib_protocol(u8 * s, va_list *ap);
319 extern u8 * format_vnet_link(u8 *s, va_list *ap);
320
321 /**
322  * Path flags from the control plane
323  */
324 typedef enum fib_route_path_flags_t_
325 {
326     FIB_ROUTE_PATH_FLAG_NONE = 0,
327     /**
328      * Recursion constraint of via a host prefix
329      */
330     FIB_ROUTE_PATH_RESOLVE_VIA_HOST = (1 << 0),
331     /**
332      * Recursion constraint of via an attahced prefix
333      */
334     FIB_ROUTE_PATH_RESOLVE_VIA_ATTACHED = (1 << 1),
335     /**
336      * A for-us/local path
337      */
338     FIB_ROUTE_PATH_LOCAL = (1 << 2),
339     /**
340      * Attached path
341      */
342     FIB_ROUTE_PATH_ATTACHED = (1 << 3),
343     /**
344      * A Drop path - resolve the path on the drop DPO
345      */
346     FIB_ROUTE_PATH_DROP = (1 << 4),
347     /**
348      * Don't resolve the path, use the DPO the client provides
349      */
350     FIB_ROUTE_PATH_EXCLUSIVE = (1 << 5),
351     /**
352      * A path that result in received traffic being recieved/recirculated
353      * so that it appears to have arrived on the new interface
354      */
355     FIB_ROUTE_PATH_INTF_RX = (1 << 6),
356     /**
357      * A local path with a RPF-ID => multicast traffic
358      */
359     FIB_ROUTE_PATH_RPF_ID = (1 << 7),
360     /**
361      * A deag path using the packet's source not destination address.
362      */
363     FIB_ROUTE_PATH_SOURCE_LOOKUP = (1 << 8),
364     /**
365      * A path via a UDP encap object.
366      */
367     FIB_ROUTE_PATH_UDP_ENCAP = (1 << 9),
368     /**
369      * A path that resolves via a BIER F-Mask
370      */
371     FIB_ROUTE_PATH_BIER_FMASK = (1 << 10),
372     /**
373      * A path that resolves via a BIER [ECMP] Table
374      */
375     FIB_ROUTE_PATH_BIER_TABLE = (1 << 11),
376     /**
377      * A path that resolves via a BIER impostion object
378      */
379     FIB_ROUTE_PATH_BIER_IMP = (1 << 12),
380     /**
381      * A path that resolves via another table
382      */
383     FIB_ROUTE_PATH_DEAG = (1 << 13),
384     /**
385      * A path that resolves via a DVR DPO
386      */
387     FIB_ROUTE_PATH_DVR = (1 << 14),
388
389     FIB_ROUTE_PATH_ICMP_UNREACH = (1 << 15),
390     FIB_ROUTE_PATH_ICMP_PROHIBIT = (1 << 16),
391     FIB_ROUTE_PATH_CLASSIFY = (1 << 17),
392
393     /**
394      * Pop a Psuedo Wire Control Word
395      */
396     FIB_ROUTE_PATH_POP_PW_CW = (1 << 18),
397 } fib_route_path_flags_t;
398
399 /**
400  * Format route path flags
401  */
402 extern u8 * format_fib_route_path_flags(u8 *s, va_list *ap);
403
404 /**
405  * An RPF-ID is numerical value that is used RPF validate. An entry
406  * has-a RPF-ID, when a packet egress from (e.g. an LSP) it gains an
407  * RPF-ID, these two are compared for the RPF check.
408  * This replaces the interfce based chack (since the LSP has no associated
409  * interface.
410  */
411 typedef u32 fib_rpf_id_t;
412
413 #define MFIB_RPF_ID_NONE (0)
414
415 /**
416  * MPLS LSP mode - only valid at the head and tail
417  */
418 typedef enum fib_mpls_lsp_mode_t_
419 {
420     /**
421      * Pipe Mode - the default.
422      *  TTL and DSCP markings are not carried between the layers
423      */
424     FIB_MPLS_LSP_MODE_PIPE,
425     /**
426      * Uniform mode.
427      *  TTL and DSCP are copied between the layers
428      */
429     FIB_MPLS_LSP_MODE_UNIFORM,
430 } __attribute__((packed)) fib_mpls_lsp_mode_t;
431
432 #define FIB_MPLS_LSP_MODES {                    \
433     [FIB_MPLS_LSP_MODE_PIPE]     = "pipe",      \
434     [FIB_MPLS_LSP_MODE_UNIFORM]  = "uniform",   \
435 }
436
437 /**
438  * Format an LSP mode type
439  */
440 extern u8 * format_fib_mpls_lsp_mode(u8 *s, va_list *ap);
441
442 /**
443  * Configuration for each label value in the output-stack
444  */
445 typedef struct fib_mpls_label_t_
446 {
447     /**
448      * The label value
449      */
450     mpls_label_t fml_value;
451
452     /**
453      * The LSP mode
454      */
455     fib_mpls_lsp_mode_t fml_mode;
456
457     /**
458      * TTL. valid only at imposition.
459      */
460     u8 fml_ttl;
461
462     /**
463      * EXP bits; valid only at imposition.
464      */
465     u8 fml_exp;
466 } fib_mpls_label_t;
467
468 /**
469  * Format an MPLS label
470  */
471 extern u8 * format_fib_mpls_label(u8 *s, va_list *ap);
472
473 /**
474  * @brief 
475  * A representation of a path as described by a route producer.
476  * These paramenters will determine the path 'type', of which there are:
477  * 1) Attached-next-hop:
478  *   a single peer on a link.
479  *   It is 'attached' because it is in the same sub-net as the router, on a link
480  *   directly connected to the route.
481  *   It is 'next=hop' since the next-hop address of the peer is known.
482  * 2) Attached:
483  *  the next-hop is not known. but we can ARP for it.
484  * 3) Recursive.
485  *  The next-hop is known but the interface is not. So to find the adj to use
486  *  we must recursively resolve the next-hop.
487  * 3) deaggregate (deag)
488  *  A further lookup is required.
489  */
490 typedef struct fib_route_path_t_ {
491     /**
492      * The protocol of the address below. We need this since the all
493      * zeros address is ambiguous.
494      */
495     dpo_proto_t frp_proto;
496
497     union {
498         struct {
499             union {
500                 /**
501                  * The next-hop address.
502                  * Will be NULL for attached paths.
503                  * Will be all zeros for attached-next-hop paths on a p2p interface
504                  * Will be all zeros for a deag path.
505                  */
506                 ip46_address_t frp_addr;
507
508                 struct {
509                     /**
510                      * The MPLS local Label to reursively resolve through.
511                      * This is valid when the path type is MPLS.
512                      */
513                     mpls_label_t frp_local_label;
514                     /**
515                      * EOS bit for the resolving label
516                      */
517                     mpls_eos_bit_t frp_eos;
518                 };
519                 /**
520                  * A path via a BIER imposition object.
521                  * Present in an mfib path list
522                  */
523                 index_t frp_bier_imp;
524             };
525
526             /**
527              * The interface.
528              * Will be invalid for recursive paths.
529              */
530             u32 frp_sw_if_index;
531
532             /**
533              * The RPF-ID
534              */
535             fib_rpf_id_t frp_rpf_id;
536
537             union {
538                 /**
539                  * The FIB index to lookup the nexthop
540                  * Only valid for recursive paths.
541                  */
542                 u32 frp_fib_index;
543                 /**
544                  * The BIER table to resolve the fmask in
545                  */
546                 u32 frp_bier_fib_index;
547             };
548             /**
549              * The outgoing MPLS label Stack. NULL implies no label.
550              */
551             fib_mpls_label_t *frp_label_stack;
552             /**
553              * Exclusive DPO
554              */
555             dpo_id_t dpo;
556             /**
557              * MFIB interface flags
558              */
559             u32 frp_mitf_flags;
560         };
561         /**
562          * A path that resolves via a BIER Table.
563          * This would be for a MPLS label at a BIER midpoint or tail
564          */
565         bier_table_id_t frp_bier_tbl;
566
567         /**
568          * UDP encap ID
569          */
570         u32 frp_udp_encap_id;
571
572         /**
573          * Classify table ID
574          */
575         u32 frp_classify_table_id;
576
577         /**
578          * Resolving via a BIER Fmask
579          */
580         index_t frp_bier_fmask;
581
582         /**
583          * The DPO for use with exclusive paths
584          */
585         dpo_id_t frp_dpo;
586     };
587     /**
588      * [un]equal cost path weight
589      */
590     u8 frp_weight;
591     /**
592      * A path preference. 0 is the best.
593      * Only paths of the best preference, that are 'up', are considered
594      * for forwarding.
595      */
596     u8 frp_preference;
597     /**
598      * flags on the path
599      */
600     fib_route_path_flags_t frp_flags;
601 } fib_route_path_t;
602
603 /**
604  * Unformat a fib_route_path_t from CLI input
605  */
606 extern uword unformat_fib_route_path(unformat_input_t * input, va_list * args);
607
608 /**
609  * Format route path flags
610  */
611 extern u8 * format_fib_route_path(u8 *s, va_list *ap);
612
613 /**
614  * A help string to list the FIB path options
615  */
616 #define FIB_ROUTE_PATH_HELP "[next-hop-address] [next-hop-interface] [next-hop-table <value>] [weight <value>] [preference <value>] [udp-encap-id <value>] [ip4-lookup-in-table <value>] [ip6-lookup-in-table <value>] [mpls-lookup-in-table <value>] [resolve-via-host] [resolve-via-connected] [rx-ip4 <interface>] [out-labels <value value value>]"
617
618 /**
619  * return code to control pat-hlist walk
620  */
621 typedef enum fib_path_list_walk_rc_t_
622 {
623     FIB_PATH_LIST_WALK_STOP,
624     FIB_PATH_LIST_WALK_CONTINUE,
625 } fib_path_list_walk_rc_t;
626
627 /**
628  * A list of path-extensions
629  */
630 typedef struct fib_path_ext_list_t_
631 {
632     struct fib_path_ext_t_ *fpel_exts;
633 } fib_path_ext_list_t;
634
635 #endif