API sw_interface_dump: Dump all if index is zero
[vpp.git] / src / vnet / interface.api
1 /* Hey Emacs use -*- mode: C -*- */
2 /*
3  * Copyright (c) 2018 Cisco and/or its affiliates.
4  * Licensed under the Apache License, Version 2.0 (the "License");
5  * you may not use this file except in compliance with the License.
6  * You may obtain a copy of the License at:
7  *
8  *     http://www.apache.org/licenses/LICENSE-2.0
9  *
10  * Unless required by applicable law or agreed to in writing, software
11  * distributed under the License is distributed on an "AS IS" BASIS,
12  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13  * See the License for the specific language governing permissions and
14  * limitations under the License.
15  */
16
17 option version = "2.3.1";
18
19 import "vnet/interface_types.api";
20
21 service {
22   rpc want_interface_events returns want_interface_events_reply
23     events sw_interface_event;
24 };
25
26 /** \brief Set flags on the interface
27     @param client_index - opaque cookie to identify the sender
28     @param context - sender context, to match reply w/ request
29     @param sw_if_index - index of the interface to set flags on
30     @param admin_up_down - set the admin state, 1 = up, 0 = down
31     @param link_up_down - Oper state sent on change event, not used in config.
32 */
33 autoreply define sw_interface_set_flags
34 {
35   u32 client_index;
36   u32 context;
37   u32 sw_if_index;
38   /* 1 = up, 0 = down */
39   u8 admin_up_down;
40 };
41
42 /** \brief Set interface physical MTU
43     @param client_index - opaque cookie to identify the sender
44     @param context - sender context, to match reply w/ request
45     @param sw_if_index - index of the interface to set MTU on
46     @param mtu - MTU
47 */
48 autoreply define hw_interface_set_mtu
49 {
50   u32 client_index;
51   u32 context;
52   u32 sw_if_index;
53   u16 mtu;
54 };
55
56 /** \brief Set interface L3 MTU */
57 autoreply define sw_interface_set_mtu
58 {
59   u32 client_index;
60   u32 context;
61   u32 sw_if_index;
62   /* $$$$ Replace with enum */
63   u32 mtu[4]; /* 0 - L3, 1 - IP4, 2 - IP6, 3 - MPLS */
64 };
65
66 /** \brief Set IP4 directed broadcast
67     The directed broadcast enabled a packet sent to the interface's
68     subnet address will be broadcast on the interface
69     @param sw_if_index
70     @param enable
71 */
72 autoreply define sw_interface_set_ip_directed_broadcast
73 {
74   u32 client_index;
75   u32 context;
76   u32 sw_if_index;
77   u8  enable;
78 };
79
80 /** \brief Interface Event generated by want_interface_events
81     @param client_index - opaque cookie to identify the sender
82     @param pid - client pid registered to receive notification
83     @param sw_if_index - index of the interface of the event
84     @param admin_up_down - The administrative state; 1 = up, 0 = down
85     @param link_up_down - The operational state; 1 = up, 0 = down
86     @param deleted - interface was deleted
87 */
88 define sw_interface_event
89 {
90   u32 client_index;
91   u32 pid;
92   u32 sw_if_index;
93   u8 admin_up_down;
94   u8 link_up_down;
95   u8 deleted;
96 };
97
98 /** \brief Register for interface events
99     @param client_index - opaque cookie to identify the sender
100     @param context - sender context, to match reply w/ request
101     @param enable_disable - 1 => register for events, 0 => cancel registration
102     @param pid - sender's pid
103 */
104 autoreply define want_interface_events
105 {
106   u32 client_index;
107   u32 context;
108   u32 enable_disable;
109   u32 pid;
110 };
111
112 /** \brief Interface details structure (fix this) 
113     @param sw_if_index - index of the interface
114     @param sup_sw_if_index - index of parent interface if any, else same as sw_if_index
115     @param l2_address_length - length of the interface's l2 address
116     @param pid - the interface's l2 address
117     @param interface_name - name of the interface
118     @param link_duplex - 1 if half duplex, 2 if full duplex
119     @param link_speed - value in kbps
120     @param link_MTU - max. transmission unit
121     @param sub_if_id - A number 0-N to uniquely identify this subif on super if
122     @param sub_dot1ad - 0 = dot1q, 1 = dot1ad
123     @param sub_dot1ah - 1 = dot1ah, 0 = otherwise
124     @param sub_number_of_tags - Number of tags (0 - 2)
125     @param sub_outer_vlan_id
126     @param sub_inner_vlan_id
127     @param sub_exact_match
128     @param sub_default
129     @param sub_outer_vlan_id_any
130     @param sub_inner_vlan_id_any
131     @param vtr_op - vlan tag rewrite operation
132     @param vtr_push_dot1q
133     @param vtr_tag1
134     @param vtr_tag2
135     @param pbb_outer_tag - translate pbb s-tag
136     @param pbb_b_dmac[6] - B-tag remote mac address
137     @param pbb_b_smac[6] - B-tag local mac address
138     @param pbb_b_vlanid - B-tag vlanid
139     @param pbb_i_sid - I-tag service id
140 */
141 define sw_interface_details
142 {
143   u32 context;
144   u32 sw_if_index;
145
146   /* index of sup interface (e.g. hw interface).
147      equal to sw_if_index for super hw interface. */
148   u32 sup_sw_if_index;
149
150   /* Layer 2 address, if applicable */
151   u32 l2_address_length;
152   u8 l2_address[8];
153
154   /* Interface name */
155   u8 interface_name[64];
156
157   /* 1 = up, 0 = down */
158   u8 admin_up_down;
159   u8 link_up_down;
160
161   /* 1 = half duplex, 2 = full duplex */
162   u8 link_duplex;
163
164   /* link speed in kbps */
165   u32 link_speed;
166
167   /* MTU */
168   u16 link_mtu;
169
170   /* Per protocol MTUs */
171   u32 mtu[4]; /* 0 - L3, 1 - IP4, 2 - IP6, 3 - MPLS */
172
173   /* Subinterface ID. A number 0-N to uniquely identify this subinterface under the super interface */
174   u32 sub_id;
175
176   /* 0 = dot1q, 1=dot1ad */
177   u8 sub_dot1ad;
178   /* 1 = dot1h, 1=otherwise */
179   u8 sub_dot1ah;
180
181   /* Number of tags 0-2 */
182   u8 sub_number_of_tags;
183   u16 sub_outer_vlan_id;
184   u16 sub_inner_vlan_id;
185   u8 sub_exact_match;
186   u8 sub_default;
187   u8 sub_outer_vlan_id_any;
188   u8 sub_inner_vlan_id_any;
189
190   /* vlan tag rewrite state */
191   u32 vtr_op;
192   u32 vtr_push_dot1q;           // ethertype of first pushed tag is dot1q/dot1ad
193   u32 vtr_tag1;                 // first pushed tag
194   u32 vtr_tag2;                 // second pushed tag
195   u8 tag[64];
196
197   /* pbb tag rewrite info */
198   u16 outer_tag;
199   u8  b_dmac[6];
200   u8  b_smac[6];
201   u16 b_vlanid;
202   u32 i_sid;
203 };
204
205 /** \brief Request all or filtered subset of sw_interface_details
206     @param client_index - opaque cookie to identify the sender
207     @param context - sender context, to match reply w/ request
208     @param sw_if_index - index of the interface to dump info on, 0 or ~0 if on all
209       TODO: Support selecting only index==0 when CSIT is ready.
210     @param name_filter_valid - 1 if requesting a filtered subset of records else 0
211       if name filter is set as valid, sw_if_index value is ignored and all interfaces are examined
212     @param name_filter - interface name substring filter. Eg. loop1 returns [loop1, loop10]
213 */
214 define sw_interface_dump
215 {
216   u32 client_index;
217   u32 context;
218   vl_api_interface_index_t sw_if_index;
219   u8 name_filter_valid;
220   u8 name_filter[49];
221 };
222
223 /** \brief Set or delete one or all ip addresses on a specified interface
224     @param client_index - opaque cookie to identify the sender
225     @param context - sender context, to match reply w/ request
226     @param sw_if_index - index of the interface to add/del addresses 
227     @param is_add - add address if non-zero, else delete
228     @param is_ipv6 - if non-zero the address is ipv6, else ipv4
229     @param del_all - if non-zero delete all addresses on the interface
230     @param address_length - address length in bytes, 4 for ip4, 16 for ip6
231     @param address - array of address bytes
232 */
233 autoreply define sw_interface_add_del_address
234 {
235   u32 client_index;
236   u32 context;
237   u32 sw_if_index;
238   u8 is_add;
239   u8 is_ipv6;
240   u8 del_all;
241   u8 address_length;
242   u8 address[16];
243 };
244
245 /** \brief Associate the specified interface with a fib table
246     @param client_index - opaque cookie to identify the sender
247     @param context - sender context, to match reply w/ request
248     @param sw_if_index - index of the interface
249     @param is_ipv6 - if non-zero ipv6, else ipv4
250     @param vrf_id - fib table/vrd id to associate the interface with
251 */
252 autoreply define sw_interface_set_table
253 {
254   u32 client_index;
255   u32 context;
256   u32 sw_if_index;
257   u8 is_ipv6;
258   u32 vrf_id;
259 };
260
261 /** \brief Get VRF id assigned to interface
262     @param client_index - opaque cookie to identify the sender
263     @param context - sender context, to match reply w/ request
264     @param sw_if_index - index of the interface
265 */
266 define sw_interface_get_table
267 {
268   u32 client_index;
269   u32 context;
270   u32 sw_if_index;
271   u8 is_ipv6;
272 };
273
274 /** \brief Reply to get_sw_interface_vrf
275     @param context - sender context which was passed in the request
276     @param vrf_id - VRF id assigned to the interface
277 */
278 define sw_interface_get_table_reply
279 {
280   u32 context;
281   i32 retval;
282   u32 vrf_id;
283 };
284
285 /** \brief Set unnumbered interface add / del request
286     @param client_index - opaque cookie to identify the sender
287     @param context - sender context, to match reply w/ request
288     @param sw_if_index - interface with an IP address
289     @param unnumbered_sw_if_index - interface which will use the address
290     @param is_add - if non-zero set the association, else unset it
291 */
292 autoreply define sw_interface_set_unnumbered
293 {
294   u32 client_index;
295   u32 context;
296   u32 sw_if_index;              /* use this intfc address */
297   u32 unnumbered_sw_if_index;   /* on this interface */
298   u8 is_add;
299 };
300
301 /** \brief Clear interface statistics
302     @param client_index - opaque cookie to identify the sender
303     @param context - sender context, to match reply w/ request
304     @param sw_if_index - index of the interface to clear statistics
305 */
306 autoreply define sw_interface_clear_stats
307 {
308   u32 client_index;
309   u32 context;
310   u32 sw_if_index;
311 };
312
313 /** \brief Set / clear software interface tag
314     @param client_index - opaque cookie to identify the sender
315     @param context - sender context, to match reply w/ request
316     @param sw_if_index - the interface
317     @param add_del - 1 = add, 0 = delete
318     @param tag - an ascii tag
319 */
320 autoreply define sw_interface_tag_add_del 
321 {
322     u32 client_index;
323     u32 context;
324     u8 is_add;
325     u32 sw_if_index;
326     u8 tag[64];
327 };
328
329 /** \brief Set an interface's MAC address
330     @param client_index - opaque cookie to identify the sender
331     @param context - sender context, to match reply w/ request
332     @param sw_if_index - the interface whose MAC will be set
333     @param mac_addr - the new MAC address
334 */
335 autoreply define sw_interface_set_mac_address
336 {
337     u32 client_index;
338     u32 context;
339     u32 sw_if_index;
340     u8 mac_address[6];
341 };
342
343 /** \brief Get interface's MAC address
344     @param client_index - opaque cookie to identify the sender
345     @param context - sender context, to match reply w/ request
346     @param sw_if_index - the interface whose MAC will be returned
347 */
348 define sw_interface_get_mac_address
349 {
350     u32 client_index;
351     u32 context;
352     u32 sw_if_index;
353 };
354
355 /** \brief Reply for get interface's MAC address request
356     @param context - returned sender context, to match reply w/ request
357     @param retval - return code
358     @param mac_addr - returned interface's MAC address
359 */
360 define sw_interface_get_mac_address_reply
361 {
362     u32 context;
363     i32 retval;
364     u8 mac_address[6];
365 };
366
367 /** \brief Set an interface's rx-mode
368     @param client_index - opaque cookie to identify the sender
369     @param context - sender context, to match reply w/ request
370     @param sw_if_index - the interface whose rx-mode will be set
371     @param queue_id_valid - 1 = the queue_id field is valid. 0 means all
372       queue_id's
373     @param queue_id - the queue number whose rx-mode will be set. Only valid
374       if queue_id_valid is 1
375     @param mode - polling=1, interrupt=2, adaptive=3
376 */
377 autoreply define sw_interface_set_rx_mode
378 {
379     u32 client_index;
380     u32 context;
381     u32 sw_if_index;
382     u8 queue_id_valid;
383     u32 queue_id;
384     u8 mode;
385 };
386
387 /** \brief Set an interface's rx-placement
388     Rx-Queue placement on specific thread is operational for only hardware
389     interface. It will not set queue - thread placement for sub-interfaces,
390     p2p and pipe interfaces.
391     @param client_index - opaque cookie to identify the sender
392     @param context - sender context, to match reply w/ request
393     @param sw_if_index - the interface whose rx-placement will be set
394     @param queue_id - the queue number whose rx-placement will be set.
395     @param worker_id - the worker number whom rx-placement will be at.
396     @param is_main - flag to set rx-placement to main thread
397 */
398 autoreply define sw_interface_set_rx_placement
399 {
400     u32 client_index;
401     u32 context;
402     u32 sw_if_index;
403     u32 queue_id;
404     u32 worker_id;
405     u8 is_main;
406 };
407
408 /** \brief dump the rx queue placement of interface(s)
409     @param sw_if_index - optional interface index for which queue placement to
410       be requested. sw_if_index = ~0 will dump placement information for all
411       interfaces. It will not dump information related to sub-interfaces, p2p
412       and pipe interfaces.
413 */
414 define sw_interface_rx_placement_dump
415 {
416   u32 client_index;
417   u32 context;
418   u32 sw_if_index;
419 };
420
421 /** \brief show the interface's queue - thread placement
422     This api is used to display the interface and queue worker
423     thread placement. One message per rx-queue per interface will
424     be sent to client.
425     Each message will contain information about rx-queue id of an
426     interface, interface index, thread on which this rx-queue is
427     placed and mode of rx-queue.
428     @param client_index - opaque cookie to identify the sender
429     @param context - sender context, to match reply w/ request
430     @param sw_if_index - the interface whose rx-placement will be dumped
431     @param queue_id - the queue id
432     @param worker_id - the worker id on which queue_id is placed,
433                        worker_id = 0 means main thread.
434     @param mode - polling=1, interrupt=2, adaptive=3
435 */
436 define sw_interface_rx_placement_details
437 {
438   u32 client_index;
439   u32 context;
440   u32 sw_if_index;
441   u32 queue_id;
442   u32 worker_id;
443   u8 mode;
444 };
445
446 /* Gross kludge, DGMS */
447 autoreply define interface_name_renumber
448 {
449   u32 client_index;
450   u32 context;
451   u32 sw_if_index;
452   u32 new_show_dev_instance;
453 };
454
455 define create_subif
456 {
457   u32 client_index;
458   u32 context;
459   u32 sw_if_index;
460   u32 sub_id;
461
462   /* These fields map directly onto the subif template */
463   u8 no_tags;
464   u8 one_tag;
465   u8 two_tags;
466   u8 dot1ad;                    // 0 = dot1q, 1=dot1ad
467   u8 exact_match;
468   u8 default_sub;
469   u8 outer_vlan_id_any;
470   u8 inner_vlan_id_any;
471   u16 outer_vlan_id;
472   u16 inner_vlan_id;
473 };
474
475 define create_subif_reply
476 {
477   u32 context;
478   i32 retval;
479   u32 sw_if_index;
480 };
481
482 /** \brief Create a new subinterface with the given vlan id
483     @param client_index - opaque cookie to identify the sender
484     @param context - sender context, to match reply w/ request
485     @param sw_if_index - software index of the new vlan's parent interface
486     @param vlan_id - vlan tag of the new interface
487 */
488 define create_vlan_subif
489 {
490   u32 client_index;
491   u32 context;
492   u32 sw_if_index;
493   u32 vlan_id;
494 };
495
496 /** \brief Reply for the vlan subinterface create request
497     @param context - returned sender context, to match reply w/ request
498     @param retval - return code
499     @param sw_if_index - software index allocated for the new subinterface
500 */
501 define create_vlan_subif_reply
502 {
503   u32 context;
504   i32 retval;
505   u32 sw_if_index;
506 };
507
508 /** \brief Delete sub interface request
509     @param client_index - opaque cookie to identify the sender
510     @param context - sender context, to match reply w/ request
511     @param sw_if_index - sw index of the interface that was created by create_subif
512 */
513 autoreply define delete_subif {
514   u32 client_index;
515   u32 context;
516   u32 sw_if_index;
517 };
518
519 /** \brief Create loopback interface request
520     @param client_index - opaque cookie to identify the sender
521     @param context - sender context, to match reply w/ request
522     @param mac_address - mac addr to assign to the interface if none-zero
523 */
524 define create_loopback
525 {
526   u32 client_index;
527   u32 context;
528   u8 mac_address[6];
529 };
530
531 /** \brief Create loopback interface response
532     @param context - sender context, to match reply w/ request
533     @param sw_if_index - sw index of the interface that was created
534     @param retval - return code for the request
535 */
536 define create_loopback_reply
537 {
538   u32 context;
539   i32 retval;
540   u32 sw_if_index;
541 };
542
543 /** \brief Create loopback interface instance request
544     @param client_index - opaque cookie to identify the sender
545     @param context - sender context, to match reply w/ request
546     @param mac_address - mac addr to assign to the interface if none-zero
547     @param is_specified - if non-0, a specific user_instance is being requested
548     @param user_instance - requested instance, ~0 => dynamically allocate
549 */
550 define create_loopback_instance
551 {
552   u32 client_index;
553   u32 context;
554   u8 mac_address[6];
555   u8 is_specified;
556   u32 user_instance;
557 };
558
559 /** \brief Create loopback interface instance response
560     @param context - sender context, to match reply w/ request
561     @param sw_if_index - sw index of the interface that was created
562     @param retval - return code for the request
563 */
564 define create_loopback_instance_reply
565 {
566   u32 context;
567   i32 retval;
568   u32 sw_if_index;
569 };
570
571 /** \brief Delete loopback interface request
572     @param client_index - opaque cookie to identify the sender
573     @param context - sender context, to match reply w/ request
574     @param sw_if_index - sw index of the interface that was created
575 */
576 autoreply define delete_loopback
577 {
578   u32 client_index;
579   u32 context;
580   u32 sw_if_index;
581 };
582
583 /** \brief Enable or disable detailed interface stats
584     @param client_index - opaque cookie to identify the sender
585     @param context - sender context, to match reply w/ request
586     @param sw_if_index - The interface to collect detail stats on. ~0 implies
587                          all interfaces.
588     @param enable_disable - set to 1 to enable, 0 to disable detailed stats
589 */
590 autoreply define collect_detailed_interface_stats
591 {
592   u32 client_index;
593   u32 context;
594   u32 sw_if_index;
595   u8  enable_disable;
596 };
597
598 /*
599  * Local Variables:
600  * eval: (c-set-style "gnu")
601  * End:
602  */