ip-neighbor: Send API event when neighbor is removed
[vpp.git] / src / vnet / ip-neighbor / ip_neighbor.api
1 /* Hey Emacs use -*- mode: C -*- */
2 /*
3  * Copyright (c) 2018 Cisco and/or its affiliates.
4  * Licensed under the Apache License, Version 2.0 (the "License");
5  * you may not use this file except in compliance with the License.
6  * You may obtain a copy of the License at:
7  *
8  *     http://www.apache.org/licenses/LICENSE-2.0
9  *
10  * Unless required by applicable law or agreed to in writing, software
11  * distributed under the License is distributed on an "AS IS" BASIS,
12  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13  * See the License for the specific language governing permissions and
14  * limitations under the License.
15  */
16
17 /** \file
18
19     This file defines vpp IP neighbor control-plane API messages which are generally
20     called through a shared memory interface. 
21 */
22
23 option version = "1.0.0";
24
25 import "vnet/ip/ip_types.api";
26 import "vnet/ethernet/ethernet_types.api";
27 import "vnet/interface_types.api";
28
29 /** \brief IP neighbor flags
30     @param is_static - A static neighbor Entry - there are not flushed
31                        If the interface goes down.
32     @param is_no_fib_entry - Do not create a corresponding entry in the FIB
33                            table for the neighbor.
34 */
35 enum ip_neighbor_flags: u8
36 {
37   IP_API_NEIGHBOR_FLAG_NONE = 0,
38   IP_API_NEIGHBOR_FLAG_STATIC = 0x1,
39   IP_API_NEIGHBOR_FLAG_NO_FIB_ENTRY = 0x2,
40 };
41
42 /** \brief IP neighbor
43     @param sw_if_index - interface used to reach neighbor
44     @param flags - flags for the neighbor
45     @param mac_address - l2 address of the neighbor
46     @param ip_address - ip4 or ip6 address of the neighbor
47 */
48 typedef ip_neighbor {
49   vl_api_interface_index_t sw_if_index;
50   vl_api_ip_neighbor_flags_t flags;
51   vl_api_mac_address_t mac_address;
52   vl_api_address_t ip_address;
53 };
54
55 /** \brief IP neighbor add / del request
56     @param client_index - opaque cookie to identify the sender
57     @param context - sender context, to match reply w/ request
58     @param is_add - 1 to add neighbor, 0 to delete
59     @param neighbor - the neighbor to add/remove
60 */
61 define ip_neighbor_add_del
62 {
63   u32 client_index;
64   u32 context;
65   /* 1 = add, 0 = delete */
66   bool is_add;
67   vl_api_ip_neighbor_t neighbor;
68 };
69 /** \brief IP neighbor add / del reply
70     @param client_index - opaque cookie to identify the sender
71     @param context - sender context, to match reply w/ request
72     @param retval - return value
73     @param stats_index - the index to use for this neighbor in the stats segment
74 */
75 define ip_neighbor_add_del_reply
76 {
77   u32 context;
78   i32 retval;
79   u32 stats_index;
80 };
81
82 /** \brief Dump IP neighbors
83     @param client_index - opaque cookie to identify the sender
84     @param context - sender context, to match reply w/ request
85     @param sw_if_index - the interface to dump neighbors, ~0 == all
86     @param af - address family is ipv[6|4]
87 */
88 define ip_neighbor_dump
89 {
90   u32 client_index;
91   u32 context;
92   vl_api_interface_index_t sw_if_index  [default=0xffffffff];
93   vl_api_address_family_t af;
94 };
95
96 /** \brief IP neighbors dump response
97     @param context - sender context which was passed in the request
98     @param age - time between last update and sending this message, in seconds
99     @param neighbour - the neighbor
100 */
101 define ip_neighbor_details {
102   u32 context;
103   f64 age;
104   vl_api_ip_neighbor_t neighbor;
105 };
106
107 /** \brief Enable/disable periodic IP neighbor scan
108     @param client_index - opaque cookie to identify the sender
109     @param context - sender context, to match reply w/ request
110     @param af - Address family v4/v6
111     @param max_number - The maximum number of neighbours that will be created.
112                          default 50k
113     @param max_age - The maximum age (in seconds) before an inactive neighbour
114                      is flushed
115                          default 0 => never
116     @param recycle - If max_number of neighbours is reached and new ones need
117                       to be created should the oldest neighbour be 'recycled'.
118 */
119 autoreply define ip_neighbor_config
120 {
121   u32 client_index;
122   u32 context;
123   vl_api_address_family_t af;
124   u32 max_number;
125   u32 max_age;
126   bool recycle;
127 };
128
129 /** \brief IP neighbour replace begin
130
131     The use-case is that, for some unspecified reason, the control plane
132     has a different set of neighbours it than VPP
133     currently has. The CP would thus like to 'replace' VPP's set
134     only by specifying what the new set shall be, i.e. it is not
135     going to delete anything that already exists, rather, it wants any
136     unspecified neighbors deleted implicitly.
137     The CP declares the start of this procedure with this replace_begin
138     API Call, and when it has populated all neighbours it wants, it calls
139     the below replace_end API. From this point on it is of course free
140     to add and delete neighbours as usual.
141     The underlying mechanism by which VPP implements this replace is
142     intentionally left unspecified.
143
144     @param client_index - opaque cookie to identify the sender
145     @param context - sender context, to match reply w/ request
146 */
147 autoreply define ip_neighbor_replace_begin
148 {
149   u32 client_index;
150   u32 context;
151 };
152
153 /** \brief IP neighbour replace end
154
155     see ip_neighbor_replace_begin description.
156
157     @param client_index - opaque cookie to identify the sender
158     @param context - sender context, to match reply w/ request
159 */
160 autoreply define ip_neighbor_replace_end
161 {
162   u32 client_index;
163   u32 context;
164 };
165
166 /** \brief IP neighbor flush request - removes *all* neighbours.
167      dynamic and static from API/CLI and dynamic from data-plane.
168
169     @param client_index - opaque cookie to identify the sender
170     @param context - sender context, to match reply w/ request
171     @param af - Flush neighbours of this address family
172     @param sw_if_index - Flush on this interface (~0 => all interfaces)
173 */
174 autoreply define ip_neighbor_flush
175 {
176   u32 client_index;
177   u32 context;
178   vl_api_address_family_t af;
179   vl_api_interface_index_t sw_if_index [default=0xffffffff];
180 };
181
182 /** \brief Register for IP neighbour events creation
183     @param client_index - opaque cookie to identify the sender
184     @param context - sender context, to match reply w/ request
185     @param enable - 1 => register for events, 0 => cancel registration
186     @param pid - sender's pid
187     @param ip - exact IP address of interested neighbor resolution event
188     @param sw_if_index - interface on which the IP address is present.
189 */
190 autoreply define want_ip_neighbor_events
191 {
192   option deprecated;
193   u32 client_index;
194   u32 context;
195   bool enable;
196   u32 pid;
197   vl_api_address_t ip;
198   vl_api_interface_index_t sw_if_index [default=0xffffffff];
199 };
200
201 /** \brief Tell client about an IP4 ARP resolution event or
202            MAC/IP info from ARP requests in L2 BDs
203     @param client_index - opaque cookie to identify the sender
204     @param pid - client pid registered to receive notification
205     @param neighbor - new neighbor created
206 */
207 define ip_neighbor_event
208 {
209   option deprecated;
210   u32 client_index;
211   u32 pid;
212   vl_api_ip_neighbor_t neighbor;
213 };
214
215 service {
216   rpc want_ip_neighbor_events returns want_ip_neighbor_events_reply
217     events ip_neighbor_event;
218 };
219
220
221 /** \brief Register for IP neighbour events (creation or deletion)
222     @param client_index - opaque cookie to identify the sender
223     @param context - sender context, to match reply w/ request
224     @param enable - 1 => register for events, 0 => cancel registration
225     @param pid - sender's pid
226     @param ip - exact IP address of interested neighbor resolution event
227     @param sw_if_index - interface on which the IP address is present.
228 */
229 autoreply define want_ip_neighbor_events_v2
230 {
231   u32 client_index;
232   u32 context;
233   bool enable;
234   u32 pid;
235   vl_api_address_t ip;
236   vl_api_interface_index_t sw_if_index [default=0xffffffff];
237 };
238
239 enum ip_neighbor_event_flags
240 {
241  /* The neighbor has been added/learned */
242  IP_NEIGHBOR_API_EVENT_FLAG_ADDED = 0x1,
243  /* The neighbor has been removed/expired */
244  IP_NEIGHBOR_API_EVENT_FLAG_REMOVED = 0x2,
245 };
246
247 /** \brief Tell client about an IP4 ARP resolution event or
248            MAC/IP info from ARP requests in L2 BDs
249     @param client_index - opaque cookie to identify the sender
250     @param pid - client pid registered to receive notification
251     @param flags - Flags
252     @param neighbor -  neighbor
253 */
254 define ip_neighbor_event_v2
255 {
256   u32 client_index;
257   u32 pid;
258   vl_api_ip_neighbor_event_flags_t flags;
259   vl_api_ip_neighbor_t neighbor;
260 };
261
262 service {
263   rpc want_ip_neighbor_events_v2 returns want_ip_neighbor_events_v2_reply
264     events ip_neighbor_event_v2;
265 };
266
267 /*
268  * Local Variables:
269  * eval: (c-set-style "gnu")
270  * End:
271  */