DVR: run L3 output features
[vpp.git] / test / test_dvr.py
1 #!/usr/bin/env python
2 import random
3 import socket
4 import unittest
5
6 from framework import VppTestCase, VppTestRunner
7 from vpp_sub_interface import VppSubInterface, VppDot1QSubint
8 from vpp_ip_route import VppIpRoute, VppRoutePath, DpoProto, VppIpMRoute, \
9     VppMRoutePath, MRouteEntryFlags, MRouteItfFlags
10 from vpp_papi_provider import L2_VTR_OP
11
12 from scapy.packet import Raw
13 from scapy.layers.l2 import Ether, Dot1Q, ARP
14 from scapy.layers.inet import IP, UDP
15 from util import ppp
16 from socket import AF_INET, inet_pton
17
18
19 class TestDVR(VppTestCase):
20     """ Distributed Virtual Router """
21
22     def setUp(self):
23         super(TestDVR, self).setUp()
24
25         self.create_pg_interfaces(range(4))
26         self.create_loopback_interfaces(range(1))
27
28         for i in self.pg_interfaces:
29             i.admin_up()
30
31         self.loop0.config_ip4()
32
33     def tearDown(self):
34         for i in self.pg_interfaces:
35             i.admin_down()
36         self.loop0.unconfig_ip4()
37
38         super(TestDVR, self).tearDown()
39
40     def assert_same_mac_addr(self, tx, rx):
41         t_eth = tx[Ether]
42         for p in rx:
43             r_eth = p[Ether]
44             self.assertEqual(t_eth.src, r_eth.src)
45             self.assertEqual(t_eth.dst, r_eth.dst)
46
47     def assert_has_vlan_tag(self, tag, rx):
48         for p in rx:
49             r_1q = p[Dot1Q]
50             self.assertEqual(tag, r_1q.vlan)
51
52     def assert_has_no_tag(self, rx):
53         for p in rx:
54             self.assertFalse(p.haslayer(Dot1Q))
55
56     def test_dvr(self):
57         """ Distributed Virtual Router """
58
59         #
60         # A packet destined to an IP address that is L2 bridged via
61         # a non-tag interface
62         #
63         ip_non_tag_bridged = "10.10.10.10"
64         ip_tag_bridged = "10.10.10.11"
65         any_src_addr = "1.1.1.1"
66
67         pkt_no_tag = (Ether(src=self.pg0.remote_mac,
68                             dst=self.loop0.local_mac) /
69                       IP(src=any_src_addr,
70                          dst=ip_non_tag_bridged) /
71                       UDP(sport=1234, dport=1234) /
72                       Raw('\xa5' * 100))
73         pkt_tag = (Ether(src=self.pg0.remote_mac,
74                          dst=self.loop0.local_mac) /
75                    IP(src=any_src_addr,
76                       dst=ip_tag_bridged) /
77                    UDP(sport=1234, dport=1234) /
78                    Raw('\xa5' * 100))
79
80         #
81         # Two sub-interfaces so we can test VLAN tag push/pop
82         #
83         sub_if_on_pg2 = VppDot1QSubint(self, self.pg2, 92)
84         sub_if_on_pg3 = VppDot1QSubint(self, self.pg3, 93)
85         sub_if_on_pg2.admin_up()
86         sub_if_on_pg3.admin_up()
87
88         #
89         # Put all the interfaces into a new bridge domain
90         #
91         self.vapi.sw_interface_set_l2_bridge(self.pg0.sw_if_index, 1)
92         self.vapi.sw_interface_set_l2_bridge(self.pg1.sw_if_index, 1)
93         self.vapi.sw_interface_set_l2_bridge(sub_if_on_pg2.sw_if_index, 1)
94         self.vapi.sw_interface_set_l2_bridge(sub_if_on_pg3.sw_if_index, 1)
95         self.vapi.sw_interface_set_l2_bridge(self.loop0.sw_if_index, 1, bvi=1)
96
97         self.vapi.sw_interface_set_l2_tag_rewrite(sub_if_on_pg2.sw_if_index,
98                                                   L2_VTR_OP.L2_POP_1,
99                                                   92)
100         self.vapi.sw_interface_set_l2_tag_rewrite(sub_if_on_pg3.sw_if_index,
101                                                   L2_VTR_OP.L2_POP_1,
102                                                   93)
103
104         #
105         # Add routes to bridge the traffic via a tagged an nontagged interface
106         #
107         route_no_tag = VppIpRoute(
108             self, ip_non_tag_bridged, 32,
109             [VppRoutePath("0.0.0.0",
110                           self.pg1.sw_if_index,
111                           is_dvr=1)])
112         route_no_tag.add_vpp_config()
113
114         #
115         # Inject the packet that arrives and leaves on a non-tagged interface
116         # Since it's 'bridged' expect that the MAC headed is unchanged.
117         #
118         rx = self.send_and_expect(self.pg0, pkt_no_tag * 65, self.pg1)
119         self.assert_same_mac_addr(pkt_no_tag, rx)
120         self.assert_has_no_tag(rx)
121
122         #
123         # Add routes to bridge the traffic via a tagged interface
124         #
125         route_with_tag = VppIpRoute(
126             self, ip_tag_bridged, 32,
127             [VppRoutePath("0.0.0.0",
128                           sub_if_on_pg3.sw_if_index,
129                           is_dvr=1)])
130         route_with_tag.add_vpp_config()
131
132         #
133         # Inject the packet that arrives non-tag and leaves on a tagged
134         # interface
135         #
136         rx = self.send_and_expect(self.pg0, pkt_tag * 65, self.pg3)
137         self.assert_same_mac_addr(pkt_tag, rx)
138         self.assert_has_vlan_tag(93, rx)
139
140         #
141         # Tag to tag
142         #
143         pkt_tag_to_tag = (Ether(src=self.pg2.remote_mac,
144                                 dst=self.loop0.local_mac) /
145                           Dot1Q(vlan=92) /
146                           IP(src=any_src_addr,
147                              dst=ip_tag_bridged) /
148                           UDP(sport=1234, dport=1234) /
149                           Raw('\xa5' * 100))
150
151         rx = self.send_and_expect(self.pg2, pkt_tag_to_tag * 65, self.pg3)
152         self.assert_same_mac_addr(pkt_tag_to_tag, rx)
153         self.assert_has_vlan_tag(93, rx)
154
155         #
156         # Tag to non-Tag
157         #
158         pkt_tag_to_non_tag = (Ether(src=self.pg2.remote_mac,
159                                     dst=self.loop0.local_mac) /
160                               Dot1Q(vlan=92) /
161                               IP(src=any_src_addr,
162                                  dst=ip_non_tag_bridged) /
163                               UDP(sport=1234, dport=1234) /
164                               Raw('\xa5' * 100))
165
166         rx = self.send_and_expect(self.pg2, pkt_tag_to_non_tag * 65, self.pg1)
167         self.assert_same_mac_addr(pkt_tag_to_tag, rx)
168         self.assert_has_no_tag(rx)
169
170         #
171         # Add an output L3 ACL that will block the traffic
172         #
173         rule_1 = ({'is_permit': 0,
174                    'is_ipv6': 0,
175                    'proto': 17,
176                    'srcport_or_icmptype_first': 1234,
177                    'srcport_or_icmptype_last': 1234,
178                    'src_ip_prefix_len': 32,
179                    'src_ip_addr': inet_pton(AF_INET, any_src_addr),
180                    'dstport_or_icmpcode_first': 1234,
181                    'dstport_or_icmpcode_last': 1234,
182                    'dst_ip_prefix_len': 32,
183                    'dst_ip_addr': inet_pton(AF_INET, ip_non_tag_bridged)})
184         acl = self.vapi.acl_add_replace(acl_index=4294967295,
185                                         r=[rule_1])
186
187         #
188         # Apply the ACL on the output interface
189         #
190         self.vapi.acl_interface_set_acl_list(self.pg1.sw_if_index,
191                                              0,
192                                              [acl.acl_index])
193
194         #
195         # Send packet's that should match the ACL and be dropped
196         #
197         rx = self.send_and_assert_no_replies(self.pg2, pkt_tag_to_non_tag * 65)
198
199         #
200         # cleanup
201         #
202         self.vapi.acl_interface_set_acl_list(self.pg1.sw_if_index,
203                                              0, [])
204         self.vapi.acl_del(acl.acl_index)
205
206         self.vapi.sw_interface_set_l2_bridge(self.pg0.sw_if_index, 1,
207                                              enable=0)
208         self.vapi.sw_interface_set_l2_bridge(self.pg1.sw_if_index, 1,
209                                              enable=0)
210         self.vapi.sw_interface_set_l2_bridge(sub_if_on_pg2.sw_if_index,
211                                              1, enable=0)
212         self.vapi.sw_interface_set_l2_bridge(sub_if_on_pg3.sw_if_index,
213                                              1, enable=0)
214         self.vapi.sw_interface_set_l2_bridge(self.loop0.sw_if_index,
215                                              1, bvi=1, enable=0)
216
217         #
218         # the explicit route delete is require so it happens before
219         # the sbu-interface delete. subinterface delete is required
220         # because that object type does not use the object registry
221         #
222         route_no_tag.remove_vpp_config()
223         route_with_tag.remove_vpp_config()
224         sub_if_on_pg3.remove_vpp_config()
225         sub_if_on_pg2.remove_vpp_config()
226
227     def test_l2_emulation(self):
228         """ L2 Emulation """
229
230         #
231         # non distinct L3 packets, in the tag/non-tag combos
232         #
233         pkt_no_tag = (Ether(src=self.pg0.remote_mac,
234                             dst=self.pg1.remote_mac) /
235                       IP(src="2.2.2.2",
236                          dst="1.1.1.1") /
237                       UDP(sport=1234, dport=1234) /
238                       Raw('\xa5' * 100))
239         pkt_to_tag = (Ether(src=self.pg0.remote_mac,
240                             dst=self.pg2.remote_mac) /
241                       IP(src="2.2.2.2",
242                          dst="1.1.1.2") /
243                       UDP(sport=1234, dport=1234) /
244                       Raw('\xa5' * 100))
245         pkt_from_tag = (Ether(src=self.pg3.remote_mac,
246                               dst=self.pg2.remote_mac) /
247                         Dot1Q(vlan=93) /
248                         IP(src="2.2.2.2",
249                            dst="1.1.1.1") /
250                         UDP(sport=1234, dport=1234) /
251                         Raw('\xa5' * 100))
252         pkt_from_to_tag = (Ether(src=self.pg3.remote_mac,
253                                  dst=self.pg2.remote_mac) /
254                            Dot1Q(vlan=93) /
255                            IP(src="2.2.2.2",
256                               dst="1.1.1.2") /
257                            UDP(sport=1234, dport=1234) /
258                            Raw('\xa5' * 100))
259         pkt_bcast = (Ether(src=self.pg0.remote_mac,
260                            dst="ff:ff:ff:ff:ff:ff") /
261                      IP(src="2.2.2.2",
262                         dst="255.255.255.255") /
263                      UDP(sport=1234, dport=1234) /
264                      Raw('\xa5' * 100))
265
266         #
267         # A couple of sub-interfaces for tags
268         #
269         sub_if_on_pg2 = VppDot1QSubint(self, self.pg2, 92)
270         sub_if_on_pg3 = VppDot1QSubint(self, self.pg3, 93)
271         sub_if_on_pg2.admin_up()
272         sub_if_on_pg3.admin_up()
273
274         #
275         # Put all the interfaces into a new bridge domain
276         #
277         self.vapi.sw_interface_set_l2_bridge(self.pg0.sw_if_index, 1)
278         self.vapi.sw_interface_set_l2_bridge(self.pg1.sw_if_index, 1)
279         self.vapi.sw_interface_set_l2_bridge(sub_if_on_pg2.sw_if_index, 1)
280         self.vapi.sw_interface_set_l2_bridge(sub_if_on_pg3.sw_if_index, 1)
281         self.vapi.sw_interface_set_l2_tag_rewrite(sub_if_on_pg2.sw_if_index,
282                                                   L2_VTR_OP.L2_POP_1,
283                                                   92)
284         self.vapi.sw_interface_set_l2_tag_rewrite(sub_if_on_pg3.sw_if_index,
285                                                   L2_VTR_OP.L2_POP_1,
286                                                   93)
287
288         #
289         # Disable UU flooding, learning and ARP terminaation. makes this test
290         # easier as unicast packets are dropped if not extracted.
291         #
292         self.vapi.bridge_flags(1, 0, (1 << 0) | (1 << 3) | (1 << 4))
293
294         #
295         # Add a DVR route to steer traffic at L3
296         #
297         route_1 = VppIpRoute(self, "1.1.1.1", 32,
298                              [VppRoutePath("0.0.0.0",
299                                            self.pg1.sw_if_index,
300                                            is_dvr=1)])
301         route_2 = VppIpRoute(self, "1.1.1.2", 32,
302                              [VppRoutePath("0.0.0.0",
303                                            sub_if_on_pg2.sw_if_index,
304                                            is_dvr=1)])
305         route_1.add_vpp_config()
306         route_2.add_vpp_config()
307
308         #
309         # packets are dropped because bridge does not flood unkown unicast
310         #
311         self.send_and_assert_no_replies(self.pg0, pkt_no_tag)
312
313         #
314         # Enable L3 extraction on pgs
315         #
316         self.vapi.sw_interface_set_l2_emulation(self.pg0.sw_if_index)
317         self.vapi.sw_interface_set_l2_emulation(self.pg1.sw_if_index)
318         self.vapi.sw_interface_set_l2_emulation(sub_if_on_pg2.sw_if_index)
319         self.vapi.sw_interface_set_l2_emulation(sub_if_on_pg3.sw_if_index)
320
321         #
322         # now we expect the packet forward according to the DVR route
323         #
324         rx = self.send_and_expect(self.pg0, pkt_no_tag * 65, self.pg1)
325         self.assert_same_mac_addr(pkt_no_tag, rx)
326         self.assert_has_no_tag(rx)
327
328         rx = self.send_and_expect(self.pg0, pkt_to_tag * 65, self.pg2)
329         self.assert_same_mac_addr(pkt_to_tag, rx)
330         self.assert_has_vlan_tag(92, rx)
331
332         rx = self.send_and_expect(self.pg3, pkt_from_tag * 65, self.pg1)
333         self.assert_same_mac_addr(pkt_from_tag, rx)
334         self.assert_has_no_tag(rx)
335
336         rx = self.send_and_expect(self.pg3, pkt_from_to_tag * 65, self.pg2)
337         self.assert_same_mac_addr(pkt_from_tag, rx)
338         self.assert_has_vlan_tag(92, rx)
339
340         #
341         # but broadcast packets are still flooded
342         #
343         self.send_and_expect(self.pg0, pkt_bcast * 33, self.pg2)
344
345         #
346         # cleanup
347         #
348         self.vapi.sw_interface_set_l2_emulation(self.pg0.sw_if_index,
349                                                 enable=0)
350         self.vapi.sw_interface_set_l2_emulation(self.pg1.sw_if_index,
351                                                 enable=0)
352         self.vapi.sw_interface_set_l2_emulation(sub_if_on_pg2.sw_if_index,
353                                                 enable=0)
354         self.vapi.sw_interface_set_l2_emulation(sub_if_on_pg3.sw_if_index,
355                                                 enable=0)
356
357         self.vapi.sw_interface_set_l2_bridge(self.pg0.sw_if_index,
358                                              1, enable=0)
359         self.vapi.sw_interface_set_l2_bridge(self.pg1.sw_if_index,
360                                              1, enable=0)
361         self.vapi.sw_interface_set_l2_bridge(sub_if_on_pg2.sw_if_index,
362                                              1, enable=0)
363         self.vapi.sw_interface_set_l2_bridge(sub_if_on_pg3.sw_if_index,
364                                              1, enable=0)
365
366         route_1.remove_vpp_config()
367         route_2.remove_vpp_config()
368         sub_if_on_pg3.remove_vpp_config()
369         sub_if_on_pg2.remove_vpp_config()
370
371
372 if __name__ == '__main__':
373     unittest.main(testRunner=VppTestRunner)