api acl: breakout acl_types.api for reuse by others

Type: refactor

Change-Id: I40518ccddcb78e58f7e6a098c27d9ec53e5a1146
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>

diff --git a/src/plugins/acl/acl.api b/src/plugins/acl/acl.api
index 0c230c5..b35267d 100644 (file)
--- a/src/plugins/acl/acl.api
+++ b/src/plugins/acl/acl.api
@@ -21,6 +21,8 @@
 
 option version = "1.0.1";
 
+import "plugins/acl/acl_types.api";
+
 /** \brief Get the plugin version
     @param client_index - opaque cookie to identify the sender
     @param context - sender context, to match reply w/ request
@@ -90,85 +92,6 @@ define acl_plugin_get_conn_table_max_entries_reply
   u64 conn_table_max_entries;
 };
 
-/** \brief Access List Rule entry
-    @param is_permit - deny (0), permit (1), or permit+reflect(2) action on this rule.
-    @param is_ipv6   - IP addresses in this rule are IPv6 (1) or IPv4 (0)
-    @param src_ip_addr - Source prefix value
-    @param src_ip_prefix_len - Source prefix length
-    @param dst_ip_addr - Destination prefix value
-    @param dst_ip_prefix_len - Destination prefix length
-    @param proto - L4 protocol (http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml)
-    @param srcport_or_icmptype_first - beginning of source port or ICMP4/6 type range
-    @param srcport_or_icmptype_last - end of source port or ICMP4/6 type range
-    @param dstport_or_icmpcode_first - beginning of destination port or ICMP4/6 code range
-    @param dstport_or_icmpcode_last - end of destination port or ICMP4/6 code range
-    @param tcp_flags_mask - if proto==6, match masked TCP flags with this value
-    @param tcp_flags_value - if proto==6, mask to AND the TCP flags in the packet with
-*/
-
-typeonly manual_print define acl_rule
-{
-  u8 is_permit;
-  u8 is_ipv6;
-  u8 src_ip_addr[16];
-  u8 src_ip_prefix_len;
-  u8 dst_ip_addr[16];
-  u8 dst_ip_prefix_len;
-/*
- * L4 protocol. IANA number. 1 = ICMP, 58 = ICMPv6, 6 = TCP, 17 = UDP.
- * 0 => ignore L4 and ignore the ports/tcpflags when matching.
- */
-  u8 proto;
-/*
- * If the L4 protocol is TCP or UDP, the below
- * hold ranges of ports, else if the L4 is ICMP/ICMPv6
- * they hold ranges of ICMP(v6) types/codes.
- *
- * Ranges are inclusive, i.e. to match "any" TCP/UDP port,
- * use first=0,last=65535. For ICMP(v6),
- * use first=0,last=255.
- */
-  u16 srcport_or_icmptype_first;
-  u16 srcport_or_icmptype_last;
-  u16 dstport_or_icmpcode_first;
-  u16 dstport_or_icmpcode_last;
-/*
- * for proto = 6, this matches if the
- * TCP flags in the packet, ANDed with tcp_flags_mask,
- * is equal to tcp_flags_value.
- */
-  u8 tcp_flags_mask;
-  u8 tcp_flags_value;
-};
-
-/** \brief MACIP Access List Rule entry
-    @param is_permit - deny (0), permit (1) action on this rule.
-    @param is_ipv6   - IP addresses in this rule are IPv6 (1) or IPv4 (0)
-    @param src_mac - match masked source MAC address against this value
-    @param src_mac_mask - AND source MAC address with this value before matching
-    @param src_ip_addr - Source prefix value
-    @param src_ip_prefix_len - Source prefix length
-*/
-
-typeonly manual_print define macip_acl_rule
-{
-  u8 is_permit;
-  u8 is_ipv6;
-/*
- * The source mac of the packet ANDed with src_mac_mask.
- * The source ip[46] address in the packet is matched
- * against src_ip_addr, with src_ip_prefix_len set to 0.
- *
- * For better performance, minimize the number of
- * (src_mac_mask, src_ip_prefix_len) combinations
- * in a MACIP ACL.
- */
-  u8 src_mac[6];
-  u8 src_mac_mask[6];
-  u8 src_ip_addr[16];
-  u8 src_ip_prefix_len;
-};
-
 /** \brief Replace an existing ACL in-place or create a new ACL
     @param client_index - opaque cookie to identify the sender
     @param context - sender context, to match reply w/ request

diff --git a/src/plugins/acl/acl_types.api b/src/plugins/acl/acl_types.api
new file mode 100644 (file)
index 0000000..a47c9b3
--- /dev/null
+++ b/src/plugins/acl/acl_types.api
@@ -0,0 +1,99 @@
+/* Hey Emacs use -*- mode: C -*- */
+/*
+ * Copyright (c) 2016 Cisco and/or its affiliates.
+ * Copyright 2019 Vinci Consulting Corp.  All Rights Reserved.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+ 
+/** \brief Access List Rule entry
+    @param is_permit - deny (0), permit (1), or permit+reflect(2) action on this rule.
+    @param is_ipv6   - IP addresses in this rule are IPv6 (1) or IPv4 (0)
+    @param src_ip_addr - Source prefix value
+    @param src_ip_prefix_len - Source prefix length
+    @param dst_ip_addr - Destination prefix value
+    @param dst_ip_prefix_len - Destination prefix length
+    @param proto - L4 protocol (http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml)
+    @param srcport_or_icmptype_first - beginning of source port or ICMP4/6 type range
+    @param srcport_or_icmptype_last - end of source port or ICMP4/6 type range
+    @param dstport_or_icmpcode_first - beginning of destination port or ICMP4/6 code range
+    @param dstport_or_icmpcode_last - end of destination port or ICMP4/6 code range
+    @param tcp_flags_mask - if proto==6, match masked TCP flags with this value
+    @param tcp_flags_value - if proto==6, mask to AND the TCP flags in the packet with
+*/
+
+typeonly manual_print define acl_rule
+{
+  u8 is_permit;
+  u8 is_ipv6;
+  u8 src_ip_addr[16];
+  u8 src_ip_prefix_len;
+  u8 dst_ip_addr[16];
+  u8 dst_ip_prefix_len;
+/*
+ * L4 protocol. IANA number. 1 = ICMP, 58 = ICMPv6, 6 = TCP, 17 = UDP.
+ * 0 => ignore L4 and ignore the ports/tcpflags when matching.
+ */
+  u8 proto;
+/*
+ * If the L4 protocol is TCP or UDP, the below
+ * hold ranges of ports, else if the L4 is ICMP/ICMPv6
+ * they hold ranges of ICMP(v6) types/codes.
+ *
+ * Ranges are inclusive, i.e. to match "any" TCP/UDP port,
+ * use first=0,last=65535. For ICMP(v6),
+ * use first=0,last=255.
+ */
+  u16 srcport_or_icmptype_first;
+  u16 srcport_or_icmptype_last;
+  u16 dstport_or_icmpcode_first;
+  u16 dstport_or_icmpcode_last;
+/*
+ * for proto = 6, this matches if the
+ * TCP flags in the packet, ANDed with tcp_flags_mask,
+ * is equal to tcp_flags_value.
+ */
+  u8 tcp_flags_mask;
+  u8 tcp_flags_value;
+};
+
+
+/** \brief MACIP Access List Rule entry
+    @param is_permit - deny (0), permit (1) action on this rule.
+    @param is_ipv6   - IP addresses in this rule are IPv6 (1) or IPv4 (0)
+    @param src_mac - match masked source MAC address against this value
+    @param src_mac_mask - AND source MAC address with this value before matching
+    @param src_ip_addr - Source prefix value
+    @param src_ip_prefix_len - Source prefix length
+*/
+
+typeonly manual_print define macip_acl_rule
+{
+  u8 is_permit;
+  u8 is_ipv6;
+/*
+ * The source mac of the packet ANDed with src_mac_mask.
+ * The source ip[46] address in the packet is matched
+ * against src_ip_addr, with src_ip_prefix_len set to 0.
+ *
+ * For better performance, minimize the number of
+ * (src_mac_mask, src_ip_prefix_len) combinations
+ * in a MACIP ACL.
+ */
+  u8 src_mac[6];
+  u8 src_mac_mask[6];
+  u8 src_ip_addr[16];
+  u8 src_ip_prefix_len;
+};
+
+