Nathan Skrzypczak [Mon, 15 Feb 2021 13:57:45 +0000 (14:57 +0100)]
interface: Fix rxq deletion
Type: fix
Change-Id: Ie89663de42ec94823b32aa1edf94f2c03df06627
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Nathan Skrzypczak [Mon, 15 Feb 2021 13:48:33 +0000 (14:48 +0100)]
interface: fix sh int rx
Type: fix
Change-Id: Iebe2db66af1e769486a117d6284375ce5ffff0b4
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Neale Ranns [Thu, 25 Feb 2021 16:01:28 +0000 (16:01 +0000)]
ipsec: move the IPSec SA pool out of ipsec_main
Type: refactor
this allows the ipsec_sa_get funtion to be moved from ipsec.h to
ipsec_sa.h where it belongs.
Also use ipsec_sa_get throughout the code base.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I2dce726c4f7052b5507dd8dcfead0ed5604357df
Nathan Skrzypczak [Thu, 25 Feb 2021 11:06:11 +0000 (12:06 +0100)]
cnat: add input feature node
This allows to configure nat on a per-interface basis. Special care must
be taken to ensure the configuration remains consistent.
Type: feature
Change-Id: I352b2dce182e09d30813ce958333bb1ff37d9b4e
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Nathan Skrzypczak [Thu, 25 Feb 2021 10:14:53 +0000 (11:14 +0100)]
cnat: Add maglev support
* Backend choice in translations is controlled
by lb_type switch allowing to enable Maglev.
* Size of pool is set with cnat { maglev-len 1009 }
Type: feature
Change-Id: I956e19d70bc9f3b997b4f8042831164e4b559d17
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Nathan Skrzypczak [Thu, 25 Feb 2021 10:01:41 +0000 (11:01 +0100)]
cnat: fixes & prepare maglev
Notable changes:
- ip[46]-cnat-snat is renamed to cnat-snat-ip[46]
- indent fixes
- common trace primitives
- bihash is now 40_56 with alias
Type: refactor
Change-Id: I0a82cfe3b40efd96473e51061d7135ffe412ddfc
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Piotr Bronowski [Fri, 26 Feb 2021 00:26:42 +0000 (01:26 +0100)]
crypto: fix coverity issue 218445
Fixes coverity issue CID 218445 (#1 of 1): Logically dead code
(DEADCODE) dead_error_line: Execution cannot reach this statement:
return 4294967295U;.
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: Ibf8ee0458320d20c3adca2efa2a4bfad7c190dbe
Tetsuya Murakami [Thu, 25 Feb 2021 18:47:58 +0000 (10:47 -0800)]
sr: Fix the coverity issue on srv6-mobile plugin
Type: fix
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: I55e6d7dd193f83f70d27e27fe2e383939d677ef1
Neale Ranns [Thu, 25 Feb 2021 10:05:32 +0000 (10:05 +0000)]
tests: Add tests for IPSec async mode using the crypto SW scheduler
Type: test
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Iabc8f2b09ee10a82aacebd36acfe8648cf69b7d7
Neale Ranns [Thu, 25 Feb 2021 08:38:58 +0000 (08:38 +0000)]
ipsec: ipsec.h tidy up
Type: refactor
- remove the extern declaration of the nodes. keep the use of them to
the files that declare them
- remove duplicate declaration of ipsec_set_async_mode
- remove unsued ipsec_add_feature
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6ce7bb4517b508a8f02b11f3bc819e1c5d539c02
Neale Ranns [Thu, 25 Feb 2021 08:53:15 +0000 (08:53 +0000)]
ikev2: Use the IPSec functions for UDP port management
Type: refactor
IKEv2 registers the IPSec node as the port handler, so it can use the
IPSec functions to do that.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: If398dde0a8eb0407eba3ede62a3d5a8c12fe68a7
Benoît Ganne [Fri, 12 Feb 2021 15:25:07 +0000 (16:25 +0100)]
linux-cp: fix vector-used-a-C-string overflow
lip_host_name is a non-NULL terminated vector, not a NULL-terminated
C-string.
Type: fix
Change-Id: Ie5da59bc5680be72251904467d77b18263c882f8
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Brian Russell [Mon, 22 Feb 2021 18:42:24 +0000 (18:42 +0000)]
ipsec: enable input features on tunnels
Make the ipsec[46]-tun-input nodes siblings of device-input so that
input features can be enabled on them. Register ipsec-tun for feature
updates. When a feature is enabled on the device-input arc and the
ifindex is an IPSec tunnel, change the end node of the arc for that
ifindex to be the appropriate ESP decrypt node. Set a flag on the
tunnel to indicate that the feature arc should be started for packets
input on the tunnel.
Test input policing on ESP IPSec tunnels.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I3b9f047e5e737f3ea4c58fc82cd3c15700b6f9f7
Filip Varga [Wed, 17 Feb 2021 13:34:54 +0000 (14:34 +0100)]
nat: Final NAT44 EI/ED split patch
This patch achieves complete separation of
endpoint-dependent and endpoint-independent IPv4 NAT
features. Some common stuff is also moved to NAT
library.
Type: refactor
Change-Id: I52468b7e2b5ac28958a2baf8e2ea01787322e801
Signed-off-by: Filip Varga <fivarga@cisco.com>
Mohsin Kazmi [Mon, 22 Feb 2021 18:27:57 +0000 (18:27 +0000)]
virtio: enable the interrupt support for uio_pci_generic
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ic25ffe9c8e37826733cfb9e62cefb491bb3322bc
Florin Coras [Tue, 23 Feb 2021 16:44:13 +0000 (08:44 -0800)]
session: init ctrl msg without mq lock
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I755e6da1fcf6f3bf3c72d6d36c4243b0919b7209
Július Milan [Tue, 16 Feb 2021 18:20:47 +0000 (19:20 +0100)]
fib: fix sa selection for fib routed destinations
The move from ip4(6)_src_address_for_packet to fib_sas4(6)_get changed
the behavior, so that the new looked only to adjacent gleans. This
caused a problem for destinations routed according to FIB table.
To reproduce:
vpp# create tap
vpp# set interface state tap0 up
vpp# set interface ip address tap0 192.168.11.1/24
vpp# ip route add 192.168.20.0/24 via 192.168.11.2
linux$ sudo ip addr add 192.168.20.1/24 dev lo
linux$ sudo ip link set tap0 up
linux$ sudo ip addr add 192.168.11.2/24 dev tap0
vpp# ping 192.168.20.1
Failed: no source address for egress interface
Type: fix
Signed-off-by: Július Milan <julius.milan@pantheon.tech>
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I22899f4dbbf8c1c85ccce72f801b92c183195b5d
Artem Glazychev [Wed, 17 Feb 2021 06:24:17 +0000 (13:24 +0700)]
wireguard: coverity fix
explicit null dereferenced
Type: fix
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: Id1e4b0e048dbd0a68063c63374172ab6d3653aff
Neale Ranns [Wed, 24 Feb 2021 09:18:53 +0000 (09:18 +0000)]
crypto: A more memory efficient layout of the frame element struct
Type: improvement
Also:
- state as enum so my GDB life is easier
- typo; s/indice/indices/;
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I3320f5ef1ccd7d042071ef336488a41adfad7463
Dave Wallace [Tue, 23 Feb 2021 22:36:55 +0000 (17:36 -0500)]
docs: move pnat doc link into dev doc section
- "PNAT: 1:1 match and rewrite programmable NAT" link
was hanging out on the top level of the doc tree.
Move it to VPP->Developer Documentation.
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Iadb7d3463567a2414eece68db0a3743237ab26f9
Steven Luong [Mon, 15 Feb 2021 17:25:10 +0000 (09:25 -0800)]
l2: coverity woe in l2_api.c
Coverify complains deref_ptr before null check.
deref_ptr: Directly dereferencing pointer reg.
1214 vl_reg = vl_api_client_index_to_registration (reg->client_index);
1215 ALWAYS_ASSERT (vl_reg != NULL);
1216
CID 216104 (#1 of 1): Dereference before null check (REVERSE_INULL)
check_after_deref: Null-checking reg suggests that it may be null, but it
has already been dereferenced on all paths leading to the check.
1217 if (reg && vl_api_can_send_msg (vl_reg))
I believe the check is for vl_reg instead of reg because vl_reg may be NULL
after the call vl_api_client_index_to_registration.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ic4eb2284e65c48396f20d5024a4241c80c70c886
Florin Coras [Sat, 20 Feb 2021 19:22:07 +0000 (11:22 -0800)]
hsa: fifo detach cleanup
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I907b2e560d6ecd748aa7c6d775c4f7122a39b4cb
Florin Coras [Tue, 23 Feb 2021 16:07:57 +0000 (08:07 -0800)]
vcl: segment index leak on attach
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If8840d455f8841264136adb19cc9a2046ba37b11
Florin Coras [Tue, 23 Feb 2021 20:03:03 +0000 (12:03 -0800)]
vcl: fix coverity warning
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id9f922eafe4a68661d2858d72fc548a372e9596a
Andrew Yourtchenko [Tue, 23 Feb 2021 12:04:46 +0000 (12:04 +0000)]
misc: run make test-refresh-deps to update the python dependencies
Also, remove the flake8 from requirements.txt as it looks
like upstream package is not installable...
Type: test
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I1a2132f30f7f9431d892e962a29c7d859e6a43db
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Andrew Yourtchenko [Tue, 23 Feb 2021 14:25:25 +0000 (14:25 +0000)]
tests: delete test/requirements-2.txt
Python2 has not been supported for a while now, time to spring clean...
Change-Id: Iafb18bd730c69b5aeefa6ccbfadbaaf30c92c2c8
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Type: improvement
Benoît Ganne [Thu, 18 Feb 2021 09:34:33 +0000 (10:34 +0100)]
vlib: fix offload flags value reset
When a buffer is freed and re-allocated for a new packet, opaque2 is
not reset, so the offload flags can be set to a stale value.
Make sure the offload flags are reset to the current value on 1st set.
Type: fix
Fixes:
6809538e646bf86c000dc1faba60b0a4157ad898
Change-Id: I4048febedf25b9995dbd080a11495ee7dbe59153
Signed-off-by: Benoît Ganne <bganne@cisco.com>
nandfan [Mon, 22 Feb 2021 09:17:17 +0000 (17:17 +0800)]
vcl: fix vls_intercept_sigchld_handler be called recursively
The old_sa is rewrite with vls_intercept_sigchld_handler when parent
process fork child second time, parent process will call
vls_intercept_sigchld_handler recursively when received child signal.
Type: fix
Signed-off-by: nandfan <fanyufei521@outlook.com>
Change-Id: Ia58a254d58058489aa2d91b76a3b3cab1e38f802
Andrew Yourtchenko [Mon, 22 Feb 2021 01:01:43 +0000 (01:01 +0000)]
api: fix memory leak in vl_api_cli_inband_t_handler
I noticed the memory leak while sending a lot of cli_inband APIs:
DBGvpp# memory-trace on main-heap
... send a lot of API cli_inband ...
DBGvpp# show memory main-heap
Thread 0 vpp_main
base 0x7f85c8302000, size 1g, locked, unmap-on-destroy, name 'main heap'
page stats: page-size 4K, total 262144, mapped 33129, not-mapped 229015
numa 0: 33129 pages, 129.41m bytes
total: 1023.99M, used: 125.78M, free: 898.22M, trimmable: 897.59M
Bytes Count Sample Traceback
9751632 145034 0x7f85d01696e8 clib_mem_alloc_aligned_at_offset + 0x80
vec_resize_allocate_memory + 0xa8
_vec_resize_inline + 0x240
va_unformat + 0xe4
unformat + 0x159
vlib_cli_dispatch_sub_commands + 0x11e
vlib_cli_input + 0x8f
vl_api_cli_inband_t_handler + 0xd9
vl_msg_api_handler_with_vm_node + 0x488
void_mem_api_handle_msg_i + 0x6f
vl_mem_api_handle_msg_main + 0x38
vl_api_clnt_process + 0x28d
9723904 145034 0x7f85cd677238 clib_mem_alloc_aligned_at_offset + 0x80
vec_resize_allocate_memory + 0xa8
_vec_resize_inline + 0x240
unformat_init_string + 0x10d
vl_api_cli_inband_t_handler + 0xc1
vl_msg_api_handler_with_vm_node + 0x488
void_mem_api_handle_msg_i + 0x6f
vl_mem_api_handle_msg_main + 0x38
vl_api_clnt_process + 0x28d
vlib_process_bootstrap + 0x5d
0x7f8608b0e038
290077 total traced objects
Solution: free the input data structure.
Type: fix
Change-Id: I42de5572e8760237e793a53c1a94bce65a4ac5fa
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Florin Coras [Sat, 20 Feb 2021 18:42:22 +0000 (10:42 -0800)]
vcl: cleanup fifos detached from segments
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I412024731c1f561680736ad7bfabb99b595e3dff
Florin Coras [Sun, 21 Feb 2021 01:36:19 +0000 (17:36 -0800)]
svm: free shared fifo on detach
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I639560ee3dd0a1d605ec2866dce5cdd13fda8201
wanghanlin [Mon, 22 Feb 2021 02:38:36 +0000 (10:38 +0800)]
vcl: support sockopt of SO_REUSEPORT and SO_DOMAIN
Type: fix
Signed-off-by: wanghanlin <wanghanlin@corp.netease.com>
Change-Id: I800cfffb07bf7d4c4d1454b73febdba03f7d6b75
Ivan Shvedunov [Fri, 19 Feb 2021 20:32:18 +0000 (23:32 +0300)]
ip-neighbor: add set ip neighbor-config CLI command
Type: improvement
Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com>
Change-Id: I77ade50425e88d2da979f732d2248bed383f4ba4
Florin Coras [Fri, 19 Feb 2021 05:35:23 +0000 (21:35 -0800)]
svm: return chunks to slice on fifo detach
Ensure chunk alloc distribution is maintained on fifo detach.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5aa5524e06a703dc50e90da6d177663d2d997aa4
Fan Zhang [Fri, 19 Feb 2021 12:23:08 +0000 (12:23 +0000)]
dpdk: fix cryptodev offset update
Type: fix
This patch fixes the missed crypto and integ offset update for
every packet. Previously the offset is updated only when the
key is changed. This is ok for encryption but not always true
for decryption.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: Iccd0011f4ae488746ce487a14b94ddd24fb0c07c
Brian Russell [Thu, 18 Feb 2021 11:02:29 +0000 (11:02 +0000)]
tests: add input policer thread handoff tests
Test worker thread handoff on an interface input policer.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I1deddcc9711bccfde377290bc66a00f2cd4163e1
Brian Russell [Thu, 18 Feb 2021 11:00:38 +0000 (11:00 +0000)]
policer: add thread handoff for device input
Add worker thread handoff for policers on the device input feature arc
on an interface.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: Ib795457a09a5b3be3c4e6422c91e33100192b8e2
Brian Russell [Thu, 18 Feb 2021 10:25:23 +0000 (10:25 +0000)]
policer: move handoff checks into policer code
The IP punt policer currently checks if it needs to do worker thread
handoff based on the thread index stored in the policer. Move this
functionality into the policer code so it can be common for all users
of the policer.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: Ia8d11e62898a58b19d7b27b296f8369baa3e5aa1
Brian Russell [Wed, 17 Feb 2021 15:54:52 +0000 (15:54 +0000)]
tests: test input policer
Apply a policer to an interface, check it's policing packets.
Remove it and check it no longer polices packets.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I6f694c8a9804cadf010b5831770aaae81f42e027
Brian Russell [Wed, 17 Feb 2021 15:51:45 +0000 (15:51 +0000)]
policer: add api to configure input policing
Add a new API to apply a policer to an input interface.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: Ie8aff9120149b63d85363a9a5afdcaed60a93700
Brian Russell [Wed, 17 Feb 2021 15:45:56 +0000 (15:45 +0000)]
policer: add policing as device-input feature
Add input per-interface policing as an input feature, repurposing
vnet_policer_inline which formermly allowed input policing to be
configured via a CLI.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I2fd00e964ae358a05e507c844f5476372124fae1
Filip Tehlar [Mon, 15 Feb 2021 14:06:45 +0000 (14:06 +0000)]
ikev2: start counting msgid from 0
This fixes an issue when initiator is expecting request with intitial
msgid being 0 but 1 is received instead which results in retransmission
(instead of normally processing the new request).
Type: fix
Change-Id: I60062276bd93de78128847c5b15f5d6cecf1df65
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Florin Coras [Thu, 11 Feb 2021 16:44:23 +0000 (08:44 -0800)]
session vppinfra: asan fixes
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie709d76438542783cbc8c6174b5e712ef18a6276
Florin Coras [Thu, 18 Feb 2021 22:43:32 +0000 (14:43 -0800)]
svm: fix active fifo ll on attach
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idf44f8d54c97fc43da5d5760e5ce477af07e5fbf
Brian Russell [Wed, 17 Feb 2021 10:02:47 +0000 (10:02 +0000)]
tests: remove unnecessary setup in policer test
The policer test class overrides setup and teardown methods from
VppTestCase but doesn't do anything other than call the parent's
method.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I76bac084c4cb5cb5195e34afe95b38affd585942
Dave Barach [Wed, 17 Feb 2021 15:25:18 +0000 (10:25 -0500)]
vlib: add a "vpplog" debug CLI
To add arbitrary text to the vlib log. Combines nicely with
comment/uncomment and the macro expander:
define MY_FEATURE uncomment # or comment
...
$(MY_FEATURE) { vpplog { My feature was enabled } }
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ia019f0a8fa670d8593ae01595f5ef410796e5b1c
Florin Coras [Thu, 18 Feb 2021 01:35:32 +0000 (17:35 -0800)]
vcl: epoll out deq notifications only if fifo exists
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia37d8474224f6074826c9ffb82feb919b2ef52f7
Andrew Yourtchenko [Wed, 17 Feb 2021 17:39:11 +0000 (17:39 +0000)]
tests: re-enable NAT44ED tests for multiworker
Re-enable the test for 2-worker config test
Change-Id: Ie108c5d244c6704ffa152177ca77f6b6055fe38e
Type: test
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Brian Russell [Mon, 15 Feb 2021 13:39:42 +0000 (13:39 +0000)]
tests: policer test check unformat return values
Keep coverity happy by checking the return value of unformat calls.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: Iccd0296da527d079f79cc7bd8b57af1b524299bd
Ole Troan [Wed, 17 Feb 2021 13:10:04 +0000 (14:10 +0100)]
vat2: jsonconvert return checking - coverity
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I8348645927519800d2390d27e01fae612602a6eb
Andrew Yourtchenko [Wed, 17 Feb 2021 21:26:49 +0000 (21:26 +0000)]
misc: fix the linux-cp entry for Neale
Change-Id: I0f51ddfa10ed38d23617a715f8db5a970960d126
Type: improvement
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Ole Troan [Wed, 17 Feb 2021 12:26:53 +0000 (13:26 +0100)]
vat2: add sanity checking - coverity errors
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I3cd56690fe52402d4cfa9ea67f1de53d8d919dee
Ole Troan [Wed, 17 Feb 2021 12:46:54 +0000 (13:46 +0100)]
vppapigen: resource leakage in fromjson array - coverity
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I43283c59fd121dcb2486b26151108c90b027748b
Matthew Smith [Tue, 16 Feb 2021 16:02:46 +0000 (10:02 -0600)]
linux-cp: fix coverity defect
Type: fix
If no host interface name is passed to the CLI command which creates
an interface pair, NULL gets passed to lcp_itf_pair_create() and a
seg fault occurs. Check whether a host interface name was provided
and fail gracefully if none was given.
Change-Id: I82886f4c2ee710e206c751c34a74399112e9062c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Ole Troan [Tue, 16 Feb 2021 17:09:51 +0000 (18:09 +0100)]
vppapigen: more _fromjson autogeneration coverity fixes
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I9a7bb617a3fa87d6ef49c75277e53425310cdcf9
Signed-off-by: Ole Troan <ot@cisco.com>
Florin Coras [Tue, 16 Feb 2021 15:32:22 +0000 (07:32 -0800)]
hsa: coverity fix
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I30fde452fdeeb9877f3e3fecb0dd723f10f61019
Filip Tehlar [Tue, 16 Feb 2021 08:14:31 +0000 (08:14 +0000)]
ikev2: fix coverity warnings
Type: fix
Change-Id: Ia22b1189b82e885eb380f638ea6d05923a858f01
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Ole Troan [Tue, 16 Feb 2021 00:06:22 +0000 (01:06 +0100)]
stats: coverity errors leaking fd
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I21368e37d70c5a64babd904bcf5f79339a5ab064
Signed-off-by: Ole Troan <ot@cisco.com>
Ole Troan [Mon, 15 Feb 2021 23:42:21 +0000 (00:42 +0100)]
vppapigen: coveriy missing check of return values
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I424c2f283dab99c1856eb8d9a1444486d09e8e29
Ole Troan [Mon, 15 Feb 2021 23:31:52 +0000 (00:31 +0100)]
vppapigen: fix coverity issues in jsonconvert
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I92e03a5a3fcbdab6ce4d178193dceb4450ac0f62
Ole Troan [Tue, 16 Feb 2021 00:01:30 +0000 (01:01 +0100)]
cjson: upgrade to new version
See if this fixes the coverity issues.
Now at
324a6ac9a9b285ff7a5a3e5b2071e3624b94f2db
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I2cd281ebaeda69e214e6dc93a84888298741d0ee
Signed-off-by: Ole Troan <ot@cisco.com>
Paul Vinciguerra [Thu, 19 Dec 2019 23:26:29 +0000 (18:26 -0500)]
vapi: add dedicated return code for client timeout
Type: refactor
Change-Id: I1fbabb743f20e21557c69bdaf97eda6f63584903
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Florin Coras [Mon, 15 Feb 2021 19:56:46 +0000 (11:56 -0800)]
svm: fix mq coverity warning
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1914366c17fa05305d57d842793fad372319256a
Florin Coras [Mon, 15 Feb 2021 20:11:39 +0000 (12:11 -0800)]
session: coverity fix
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic28ee0e7cd313686b820e7003a47d17b844b8a89
Florin Coras [Mon, 15 Feb 2021 20:51:06 +0000 (12:51 -0800)]
lisp: coverity fixes
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2a55a2fe0c483359c3b42ebe93cd0e8e279131d1
Mohsin Kazmi [Wed, 10 Feb 2021 10:26:24 +0000 (11:26 +0100)]
vlib: refactor checksum offload support
Type: refactor
This patch refactors the offload flags in vlib_buffer_t.
There are two main reasons behind this refactoring.
First, offload flags are insufficient to represent outer
and inner headers offloads. Second, room for these flags
in first cacheline of vlib_buffer_t is also limited.
This patch introduces a generic offload flag in first
cacheline. And detailed offload flags in 2nd cacheline
of the structure for performance optimization.
Change-Id: Icc363a142fb9208ec7113ab5bbfc8230181f6004
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Dave Barach [Mon, 15 Feb 2021 17:46:47 +0000 (12:46 -0500)]
misc: coverity fixes
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I6a3348c7edd1cce6b407d336443103f77392bc5d
Paul Vinciguerra [Mon, 27 Apr 2020 02:04:32 +0000 (22:04 -0400)]
papi: add method to retrieve field options
Sample usage:
cls.MEMIF_DEFAULT_BUFFER_SIZE = cls.vapi.vpp.get_field_options(
'memif_create', 'buffer_size')['default']
Type: improvement
Change-Id: I298f4687623003a78c93a703d32f59a937e37bc2
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Paul Vinciguerra [Wed, 6 May 2020 20:38:40 +0000 (16:38 -0400)]
tests: fix import in test/test_pcap.py
Type: test
Change-Id: Ib9192a12812b40090a0859cb73288aea27a3ca01
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Neale Ranns [Mon, 21 Dec 2020 08:29:34 +0000 (08:29 +0000)]
ip: Path MTU
Type: feature
Support setting the MTU for a peer on an interface. The minimum value of
the path and interface MTU is used at forwarding time.
the path MTU is specified for a given peer, by address and table-ID.
In the forwarding plane the MTU is enfored either:
1 - if the peer is attached, then the MTU is set on the peer's
adjacency
2 - if the peer is not attached, it is remote, then a DPO is added to
the peer's FIB entry to perform the necessary fragmentation.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
Brian Russell [Mon, 15 Feb 2021 11:49:42 +0000 (11:49 +0000)]
policer: improve policer struct
Ensure policer struct is cache aligned and fits in one cache line.
Give it a simpler name to reflect its job as the representation of
a policer.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: If1ae4931c818b86eee20306e503f4e5d6b84bd0d
Benoît Ganne [Thu, 11 Feb 2021 18:46:43 +0000 (19:46 +0100)]
vppinfra: fix memcpy undefined behaviour
Calling mem{cpy,move} with NULL pointers results in undefined behaviour.
This in turns is exploited by GCC. For example, the sequence:
memcpy (dst, src, n);
if (!src)
return;
src[0] = 0xcafe;
will be optimized as
memcpy (dst, src, n);
src[0] = 0xcafe;
IOW the test for NULL is gone.
vec_*() functions sometime call memcpy with NULL pointers and 0 length,
triggering this optimization. For example, the sequence:
vec_append(v1, v2);
len = vec_len(v2);
will crash if v2 is NULL, because the test for NULL pointer in vec_len()
has been optimized out.
This commit fixes occurrences of such undefined behaviour, and also
introduces a memcpy wrapper to catch those in debug mode.
Type: fix
Change-Id: I175e2dd726a883f97cf7de3b15f66d4b237ddefd
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Nathan Skrzypczak [Mon, 15 Feb 2021 08:35:59 +0000 (09:35 +0100)]
quic: Coverity fix
Type: fix
Change-Id: I744cedb9c1b57945af5e83057e4759964fd2e104
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Filip Tehlar [Mon, 8 Feb 2021 07:06:34 +0000 (07:06 +0000)]
ikev2: fix rekey against strongSwan
When strongSwan rekeys it sends create child sa request first and then
delete request for the old child sa (or vice versa depending on
configuration) as opposed to sending just a single create child sa with
rekey notify message.
Type: fix
Change-Id: I1fa55a607ca623cd3a6d887436207153c6f6bbf6
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Brian Russell [Wed, 10 Feb 2021 13:56:06 +0000 (13:56 +0000)]
tests: test punt policer bound to worker thread
Add to the IP[46] punt policer handoff tests by binding the policer to
a particular worker and checking all packets are policed on that thread.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I7fab28659ccb65f13f841cec65a3f808281b3f90
Brian Russell [Wed, 10 Feb 2021 13:53:42 +0000 (13:53 +0000)]
policer: add api to bind policer to worker
Add a new api to allow a policer to be bound to
a specific worker thread for thread handoff.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I2623a6827843c3d93c0d7b4ad7c2e13611ec1696
Nathan Skrzypczak [Thu, 4 Feb 2021 15:11:18 +0000 (16:11 +0100)]
interface: Add promisc on/off in api
Type: feature
Change-Id: Ib777a5201f1c728438c7a5f2b1aa2246f1344b9b
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Neale Ranns [Mon, 8 Feb 2021 15:24:56 +0000 (15:24 +0000)]
fib: Always honour flow hash flag
Type: fix
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Id7b27edf3712aaa3c277e752b9ca78bb91d184a1
Paul Vinciguerra [Fri, 4 Dec 2020 20:01:53 +0000 (15:01 -0500)]
vppapigen: py2 cleanup - remove subclassing of object
Type: refactor
Change-Id: I7136cb8ba101ea3917dacc31ceb3a76a31328301
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Paul Vinciguerra [Thu, 17 Dec 2020 02:03:16 +0000 (21:03 -0500)]
tests: explicitly close subprocess files
Resolve the following error:
/vpp/test/framework.py:657: ResourceWarning: unclosed file <_io.BufferedReader name=6>
del cls.vpp
Object allocated at (most recent call last):
File "/usr/lib/python3.8/subprocess.py", lineno 844
self.stdout = io.open(c2pread, 'rb', bufsize)
Type: test
Change-Id: Ia2974da594f0582dcff1f4bdf40d25475769c46c
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Vratko Polak [Fri, 12 Feb 2021 16:55:38 +0000 (17:55 +0100)]
rdma: rdma_log__ argument dev is a pointer
Also apply style edits as proprosed by checkstyle.
Ticket: VPP-1971
Type: fix
Change-Id: I4332a4e32220f3076b4a373da01cc0022cde32f5
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
Ole Troan [Wed, 10 Feb 2021 15:20:26 +0000 (16:20 +0100)]
nat: pnat only use save_rewrite_length on output path
Don't expect save_rewrite_length to be set correctly on RX path.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ieee40d119213f617c3d836181e5879f084b74548
Signed-off-by: Ole Troan <ot@cisco.com>
Neale Ranns [Wed, 10 Feb 2021 08:42:49 +0000 (08:42 +0000)]
ipsec: Store thread-index in buffer meta-data during SA handoff
Type: improvement
negates the need to load the SA in the handoff node.
don't prefetch the packet data, it's not needed.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I340472dc437f050cc1c3c11dfeb47ab09c609624
Vladimir Ratnikov [Thu, 28 Jan 2021 16:08:35 +0000 (11:08 -0500)]
dpdk: use whole vmbus address as hash key for devconf
u32[0] is not enough unique for some platforms like azure
where several devices(not only network) can have almost
the same addresses and this can cause collisions.
Change hash to mhash type for vmbus devices with key
of whole 16 bytes of vmbus address.
Type: improvement
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: Ic6c6a657ae29f45beddd0c69d8e785e702349460
Brian Russell [Wed, 10 Feb 2021 18:34:48 +0000 (18:34 +0000)]
policer: tidy up
Convert old logging style to new and remove unused tracepoints.
Remove code always conditionally not compiled.
Make comment style consistent.
Type: improvement
Change-Id: I13339f28539cf190fb92be2d5c8020b6249319c8
Signed-off-by: Brian Russell <brian@graphiant.com>
Brian Russell [Tue, 9 Feb 2021 11:36:31 +0000 (11:36 +0000)]
policer: use enum types
Make the policer action enum packed and use it in the policer code.
Use other policer enums where applicable.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I32f9735942af8bca3160b9ef8a75f605d9aba5fa
Arthur de Kerhor [Thu, 11 Feb 2021 11:02:44 +0000 (03:02 -0800)]
docs: fixing VPP tutorial
Updating ARP table command.
Type: fix
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: I02d6ac86aed4c83430f9d07bdeaa3e0f5c3ae73f
Brian Russell [Tue, 9 Feb 2021 10:16:58 +0000 (10:16 +0000)]
policer: remove SSE2 prefix
The policer code uses a naming convention of prefixing a lot of
its definitions with "SSE2" when in fact there is nothing SSE2
specific about them. This is confusing so remove the prefix.
Unfortunately it has to stay in the API definitions for backward
compatibility.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I59a7df9fd5ded2575f2e587b2768a025a213b07c
Ole Troan [Fri, 12 Feb 2021 10:48:12 +0000 (11:48 +0100)]
vppapigen: coverity issues in autogenerated code pass 3.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I5ee2e8aba3ee7281bbca11825dece79983e52f06
Andrew Yourtchenko [Fri, 12 Feb 2021 11:06:30 +0000 (11:06 +0000)]
build: add missing virtualenv dependencies for debian-10
Type: make
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I57a1f90d7fe9e1262f210d0c091bafda5d496c69
Ole Troan [Thu, 11 Feb 2021 10:13:46 +0000 (11:13 +0100)]
vppapigen: fix fromjson coverity errors in generation
Fix memory leak coverity errors where free was not called
on error conditions. Or called twice.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I21cffa8b01e4f72f10501f202f6a762ae300a941
Signed-off-by: Ole Troan <ot@cisco.com>
Florin Coras [Tue, 9 Feb 2021 18:03:50 +0000 (10:03 -0800)]
vppinfra: fix membulk coverity warnings
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4830656ad852de62211e31574a0e0afb62d00f37
Andrew Yourtchenko [Fri, 29 Jan 2021 13:17:19 +0000 (13:17 +0000)]
tests: tag the tests that do not work with multi-worker configuration
If the multi-worker default VPP configuration is triggered by
setting VPP_WORKER_CONFIG="workers 2", some of the tests fail
for various reasons.
It's a substantial number, so this change marks all of the
testsets that have this issue, such that they can be addressed
later independently.
Type: test
Change-Id: I4f77196499edef3300afe7eabef9cbff91f794d3
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Mohammed Hawari [Tue, 12 Jan 2021 16:00:21 +0000 (17:00 +0100)]
wireguard: testing alternative timer dispatch
Change-Id: I645bb0a31b333a6160c74987dddb3fb50ff154d8
Type: improvement
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Brian Russell [Mon, 8 Feb 2021 15:33:18 +0000 (15:33 +0000)]
policer: use ip dscp
Use the common IP definitions of DSCP rather than duplicating in the
policer code.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: Iff4bc789356edc290b9c31eca33e93cf5b6211bf
Florin Coras [Wed, 10 Feb 2021 23:26:37 +0000 (15:26 -0800)]
vcl: validate seg handle on migrate only if needed
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3c15a465f84f2ceb6bd5f1c459899824d4bc1c90
Brian Russell [Thu, 4 Feb 2021 17:53:23 +0000 (17:53 +0000)]
tests: add policer tests
Add some tests which configure policer params, use the policer
test helper CLI to police pretend packets and then check the
policer stats.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: Ib2688b6f77d84a4bfd3c8185e44c59fa2300716a
Brian Russell [Thu, 4 Feb 2021 17:23:44 +0000 (17:23 +0000)]
tests: add policer test helper
Add a helper CLI to exercise a policer pre-configured by the test
harness. The test harness will check the stats afterwards.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I913dda4a9f8179c1c6b3061a68164bf1e698a392
Dave Barach [Wed, 10 Feb 2021 12:40:05 +0000 (07:40 -0500)]
vppinfra: fix bihash test-debug aarch64 sporadic failure
Turns out that both the multi-core and single-core add / del tests run
for just under 5 seconds (aarch64, debug image). Increase the vapi =>
debug CLI timeout to avoid spurious failures.
Type: test
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ia64bffa82a908172a21c34f3ae4402ad774af28a
Neale Ranns [Tue, 9 Feb 2021 14:04:02 +0000 (14:04 +0000)]
ipsec: Use the new tunnel API types to add flow label and TTL copy
support
Type: feature
attmpet 2. this includes changes in ah_encrypt that don't use
uninitialised memory when doing tunnel mode fixups.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ie3cb776f5c415c93b8a5ee22f22586fd0181110d