CSIT-1506: Rework IPsec base testcases
[csit.git] / tests / vpp / perf / crypto / 10ge2p1x710-ethip4ipsecbasetnl-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | Resource | resources/libraries/robot/crypto/ipsec.robot
17 | ...
18 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
19 | ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE |
20 | ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
21 | ...
22 | Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name}
23 | ... | HW_DH895xcc
24 | Suite Teardown | Tear down 3-node performance topology
25 | ...
26 | Test Setup | Set up performance test
27 | Test Teardown | Tear down performance test
28 | ...
29 | Test Template | Local Template
30 | ...
31 | Documentation | *IPv4 IPsec tunnel mode performance test suite.*
32 | ...
33 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
34 | ... | with single links between nodes.
35 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
36 | ... | Eth-IPv4-IPSec on DUT1-DUT2
37 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
38 | ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
39 | ... | and send to another DUT, where packets are decrypted and sent back to TG
40 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
41 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
42 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
43 | ... | of packets transmitted. NDR and PDR are discovered for different\
44 | ... | Ethernet L2 frame sizes using MLRsearch library.\
45 | ... | TG traffic profile contains two L3 flow-groups
46 | ... | (flow-group per direction, number of flows per flow-group equals to
47 | ... | number of IPSec tunnels) with all packets
48 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and
49 | ... | static payload. MAC addresses are matching MAC addresses of the TG
50 | ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
51 | ... | is applied to both streams.
52 | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
53
54 *** Variables ***
55 | ${nic_name}= | Intel-X710
56 | ${overhead}= | ${58}
57 | ${tg_if1_ip4}= | 192.168.10.2
58 | ${dut1_if1_ip4}= | 192.168.10.1
59 | ${dut1_if2_ip4}= | 172.168.1.1
60 | ${dut2_if1_ip4}= | 172.168.1.2
61 | ${dut2_if2_ip4}= | 192.168.20.1
62 | ${tg_if2_ip4}= | 192.168.20.2
63 | ${raddr_ip4}= | 20.0.0.0
64 | ${laddr_ip4}= | 10.0.0.0
65 | ${addr_range}= | ${32}
66 | ${n_tunnels}= | ${1}
67 # Traffic profile:
68 | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}
69
70 *** Keywords ***
71 | Local Template
72 | | [Documentation]
73 | | ... | [Cfg] DUTs run 1 IPsec tunnel AES_CBC_128 / HMAC_256_SHA in each
74 | | ... | direction.\
75 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
76 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
77 | | ...
78 | | ... | *Arguments:*
79 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
80 | | ... | Type: integer, string
81 | | ... | - phy_cores - Number of physical cores. Type: integer
82 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
83 | | ...
84 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
85 | | ...
86 | | Set Test Variable | \${frame_size}
87 | | ...
88 | | # These are enums (not strings) so they cannot be in Variables table.
89 | | ${encr_alg}= | Crypto Alg AES CBC 128
90 | | ${auth_alg}= | Integ Alg SHA 256 128
91 | | ...
92 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
93 | | And Add PCI devices to all DUTs
94 | | Set Max Rate And Jumbo And Handle Multi Seg
95 | | And Add cryptodev to all DUTs | ${phy_cores}
96 | | And Apply startup configuration on all VPP DUTs
97 | | When Generate keys for IPSec | ${encr_alg} | ${auth_alg}
98 | | And Initialize IPSec in 3-node circular topology
99 | | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4}
100 | | ... | interface=${dut1_if2}
101 | | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4}
102 | | ... | interface=${dut2_if1}
103 | | And VPP IPsec Add Multiple Tunnels
104 | | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
105 | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key}
106 | | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4}
107 | | ... | ${addr_range}
108 | | Then Find NDR and PDR intervals using optimized search
109
110 *** Test Cases ***
111 | tc01-64B-1c-ethip4ipsecbasetnl-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr
112 | | [Tags] | 64B | 1C
113 | | frame_size=${64} | phy_cores=${1}
114
115 | tc02-64B-2c-ethip4ipsecbasetnl-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr
116 | | [Tags] | 64B | 2C
117 | | frame_size=${64} | phy_cores=${2}
118
119 | tc03-64B-4c-ethip4ipsecbasetnl-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr
120 | | [Tags] | 64B | 4C
121 | | frame_size=${64} | phy_cores=${4}
122
123 | tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr
124 | | [Tags] | 1518B | 1C
125 | | frame_size=${1518} | phy_cores=${1}
126
127 | tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr
128 | | [Tags] | 1518B | 2C
129 | | frame_size=${1518} | phy_cores=${2}
130
131 | tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr
132 | | [Tags] | 1518B | 4C
133 | | frame_size=${1518} | phy_cores=${4}
134
135 | tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr
136 | | [Tags] | 9000B | 1C
137 | | frame_size=${9000} | phy_cores=${1}
138
139 | tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr
140 | | [Tags] | 9000B | 2C
141 | | frame_size=${9000} | phy_cores=${2}
142
143 | tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr
144 | | [Tags] | 9000B | 4C
145 | | frame_size=${9000} | phy_cores=${4}
146
147 | tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr
148 | | [Tags] | IMIX | 1C
149 | | frame_size=IMIX_v4_1 | phy_cores=${1}
150
151 | tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr
152 | | [Tags] | IMIX | 2C
153 | | frame_size=IMIX_v4_1 | phy_cores=${2}
154
155 | tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr
156 | | [Tags] | IMIX | 4C
157 | | frame_size=IMIX_v4_1 | phy_cores=${4}

©2016 FD.io a Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation. Linux is a registered trademark of Linus Torvalds.
Please see our privacy policy and terms of use.