CSIT-427: Honeycomb ietf-ACL tests - L4 and misc. 92/3492/3
authorselias <samelias@cisco.com>
Wed, 19 Oct 2016 15:40:37 +0000 (17:40 +0200)
committerselias <samelias@cisco.com>
Thu, 20 Oct 2016 08:56:20 +0000 (10:56 +0200)
 - add test cases for:
     L4 port range ACLs
     multiple classify rules
     L2 ACL on egress interface
 - add L4 configuration to mixed ACL test
 - add test variables for new test cases
 - update HTTPRequests to treat code 201 as a positive response

Change-Id: If43007545fec174af12dab594f8a1b15b2e4a536
Signed-off-by: selias <samelias@cisco.com>
resources/libraries/python/HTTPRequest.py
resources/libraries/python/honeycomb/HcAPIKwACL.py
resources/libraries/python/honeycomb/HcAPIKwBridgeDomain.py
resources/libraries/python/honeycomb/HcAPIKwInterfaces.py
resources/libraries/robot/honeycomb/access_control_lists.robot
resources/test_data/honeycomb/ietf_acl.py
tests/func/honeycomb/081_ietf_acl_traffic.robot

index 567ac79..1f5df52 100644 (file)
@@ -32,6 +32,7 @@ from requests.auth import HTTPBasicAuth
 class HTTPCodes(IntEnum):
     """HTTP status codes"""
     OK = 200
+    ACCEPTED = 201
     UNAUTHORIZED = 401
     FORBIDDEN = 403
     NOT_FOUND = 404
index a69ab46..3758202 100644 (file)
@@ -60,7 +60,7 @@ class ACLKeywords(object):
             status_code, resp = HcUtil.\
                 delete_honeycomb_data(node, "config_classify_table", path)
 
-        if status_code != HTTPCodes.OK:
+        if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
             raise HoneycombError(
                 "The configuration of classify table was not successful. "
                 "Status code: {0}.".format(status_code))
@@ -287,8 +287,6 @@ class ACLKeywords(object):
                        "l3_ip6": "ipv6",
                        "mixed": "mixed"
                        }
-        if layer == "l4":
-            raise NotImplementedError
         try:
             suffix = suffix_dict[layer]
         except KeyError:
@@ -306,7 +304,7 @@ class ACLKeywords(object):
         status_code, resp = HcUtil.put_honeycomb_data(
             node, "config_ietf_classify_chain", data, path)
 
-        if status_code != HTTPCodes.OK:
+        if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
             raise HoneycombError(
                 "Could not create classify chain."
                 "Status code: {0}.".format(status_code))
@@ -368,31 +366,28 @@ class ACLKeywords(object):
             "mixed": {"mode": mode, "acl_type": types['vpp'].format("mixed")}
             }
 
-        if layer == "L4":
-            raise NotImplementedError
-        else:
-            try:
-                data = {
-                    "access-lists": {
-                        "acl": [
-                            {
-                                "type": layers[layer]['acl_type'],
-                                "name": list_name
-                            }
-                        ],
-                        "default-action": default_action,
-                        "mode": layers[layer]['mode']
-                    }
+        try:
+            data = {
+                "access-lists": {
+                    "acl": [
+                        {
+                            "type": layers[layer]['acl_type'],
+                            "name": list_name
+                        }
+                    ],
+                    "default-action": default_action,
+                    "mode": layers[layer]['mode']
                 }
-            except KeyError:
-                raise ValueError("Unknown network layer {0}. "
-                                 "Valid options are: {1}".format(
-                                    layer, layers.keys()))
+            }
+        except KeyError:
+            raise ValueError("Unknown network layer {0}. "
+                             "Valid options are: {1}".format(
+                                layer, layers.keys()))
 
         status_code, resp = HcUtil.put_honeycomb_data(
             node, "config_vpp_interfaces", data, path)
 
-        if status_code != HTTPCodes.OK:
+        if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
             raise HoneycombError(
                 "Could not configure ACL on interface. "
                 "Status code: {0}.".format(status_code))
index f156f09..38d5324 100644 (file)
@@ -61,7 +61,7 @@ class BridgeDomainKeywords(object):
         status_code, resp = HcUtil.\
             put_honeycomb_data(node, "config_bridge_domain", data,
                                data_representation=data_representation)
-        if status_code != HTTPCodes.OK:
+        if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
             raise HoneycombError(
                 "The configuration of bridge domain '{0}' was not successful. "
                 "Status code: {1}.".format(bd_name, status_code))
@@ -90,7 +90,7 @@ class BridgeDomainKeywords(object):
 
         status_code, resp = HcUtil.\
             get_honeycomb_data(node, "config_bridge_domain")
-        if status_code != HTTPCodes.OK:
+        if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
             raise HoneycombError(
                 "Not possible to get configuration information about the "
                 "bridge domains. Status code: {0}.".format(status_code))
index 83267b5..506db69 100644 (file)
@@ -92,7 +92,7 @@ class InterfaceKeywords(object):
         status_code, resp = HcUtil.\
             put_honeycomb_data(node, "config_vpp_interfaces", data,
                                data_representation=data_representation)
-        if status_code != HTTPCodes.OK:
+        if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
             raise HoneycombError(
                 "The configuration of interface '{0}' was not successful. "
                 "Status code: {1}.".format(interface, status_code))
@@ -255,7 +255,7 @@ class InterfaceKeywords(object):
         status_code, resp = HcUtil. \
             put_honeycomb_data(node, "config_vpp_interfaces", resp, path,
                                data_representation=DataRepresentation.JSON)
-        if status_code != HTTPCodes.OK:
+        if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
             raise HoneycombError(
                 "The configuration of interface '{0}' was not successful. "
                 "Status code: {1}.".format(interface, status_code))
@@ -1407,7 +1407,7 @@ class InterfaceKeywords(object):
         status_code, resp = HcUtil.\
             put_honeycomb_data(node, "config_vpp_interfaces", data, path,
                                data_representation=DataRepresentation.JSON)
-        if status_code != HTTPCodes.OK:
+        if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
             raise HoneycombError(
                 "The configuration of interface '{0}' was not successful. "
                 "Status code: {1}.".format(interface, status_code))
@@ -1466,7 +1466,7 @@ class InterfaceKeywords(object):
         status_code, resp = HcUtil. \
             put_honeycomb_data(node, "config_vpp_interfaces", params, path,
                                data_representation=DataRepresentation.JSON)
-        if status_code != HTTPCodes.OK:
+        if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
             raise HoneycombError(
                 "The configuration of PBB sub-interface '{0}' was not "
                 "successful. Status code: {1}.".format(intf, status_code))
index 5c60af3..7072f59 100644 (file)
 | | ... | \| ACL table from VAT should not exist \| ${nodes['DUT1']} \
 | | ... | \| ${0} \|
 | | [Arguments] | ${node} | ${table_index}
-| | Run keyword and expect error | No JSON data.
+| | Run keyword and expect error | VAT: no JSON data.
 | | ... | Get classify table data | ${node} | ${table_index}
 
 | ACL session from Honeycomb should be
index 6f785ac..aaabfa4 100644 (file)
@@ -54,6 +54,7 @@ def get_variables(test_case, name):
             # IPs for DUT interface setup
             "dut_to_tg_if1_ip": "16.0.0.2",
             "dut_to_tg_if2_ip": "192.168.0.2",
+            "prefix_length": 24,
             "gateway": "192.168.0.1",
             # classified networks
             "classify_src_net": "16.0.2.0",
@@ -61,7 +62,6 @@ def get_variables(test_case, name):
             # IPs in classified networks
             "classify_src": "16.0.2.1",
             "classify_dst": "16.0.3.1",
-            "prefix_length": 24
         },
         "l3_ip6": {
             # Override control packet addresses with IPv6
@@ -71,6 +71,7 @@ def get_variables(test_case, name):
             # IPs for DUT interface setup
             "dut_to_tg_if1_ip": "10::2",
             "dut_to_tg_if2_ip": "20::2",
+            "prefix_length": 64,
             "gateway": "20::1",
             # classified networks
             "classify_src_net": "12::",
@@ -78,7 +79,17 @@ def get_variables(test_case, name):
             # IPs in classified networks
             "classify_src": "12::1",
             "classify_dst": "13::1",
-            "prefix_length": 64
+        },
+        "l4": {
+            # IPs for DUT interface and route setup
+            "dut_to_tg_if1_ip": "16.0.0.2",
+            "dut_to_tg_if2_ip": "192.168.0.2",
+            "prefix_length": 24,
+            "gateway": "192.168.0.1",
+            "classify_dst_net": "16.0.3.0",
+            # Ports in classified ranges
+            "classify_src": 1500,
+            "classify_dst": 2000,
         },
         "mixed": {
             # IPs for DUT interface setup
@@ -96,7 +107,21 @@ def get_variables(test_case, name):
             "classify_src_mac": "01:02:03:04:56:67",
             "classify_dst_mac": "89:9A:AB:BC:50:60",
             "src_mask": "00:00:00:00:FF:FF",
-            "dst_mask": "FF:FF:FF:FF:00:00"
+            "dst_mask": "FF:FF:FF:FF:00:00",
+            # classified ports
+            "classify_src_port": 1500,
+            "classify_dst_port": 2000,
+        },
+        "multirule": {
+            # MACs classified by first rule
+            "classify_src": "12:23:34:45:56:67",
+            "classify_dst": "89:9A:AB:BC:CD:DE",
+            # MACs classified by second rule
+            "classify_src2": "01:02:03:04:56:67",
+            "classify_dst2": "89:9A:AB:BC:50:60",
+            # MAC rule masks -  only match specific addresses
+            "src_mask": "FF:FF:FF:FF:FF:FF",
+            "dst_mask": "FF:FF:FF:FF:FF:FF",
         }
     }
     acl_data = {
@@ -174,6 +199,31 @@ def get_variables(test_case, name):
                 }]}
             }]
         },
+        # ACL configuration for L4 tests
+        "l4": {
+            "acl": [{
+                "acl-type":
+                    "vpp-acl:mixed-acl",
+                "acl-name": name,
+                "access-list-entries": {"ace": [{
+                    "rule-name": "rule1",
+                    "matches": {
+                        "destination-ipv4-network": "0.0.0.0/0",
+                        "destination-port-range": {
+                            "lower-port": test_vars["l4"]["classify_dst"],
+                            "upper-port": test_vars["l4"]["classify_dst"] + 50
+                        },
+                        "source-port-range": {
+                            "lower-port": test_vars["l4"]["classify_src"],
+                            "upper-port": test_vars["l4"]["classify_src"] + 50
+                        }
+                    },
+                    "actions": {
+                        "deny": {}
+                    }
+                }]}
+            }]
+        },
         "mixed": {
             "acl": [{
                 "acl-type":
@@ -198,22 +248,89 @@ def get_variables(test_case, name):
                             "{0}/{1}".format(
                                 test_vars["mixed"]["classify_dst_net"],
                                 test_vars["mixed"]["prefix_length"]),
-                        "vpp-acl:protocol": 17
+                        "vpp-acl:protocol": 17,
+                        "vpp-acl:destination-port-range": {
+                            "lower-port": test_vars["l4"]["classify_dst"],
+                            "upper-port": test_vars["l4"]["classify_dst"] + 50
+                        },
+                        "vpp-acl:source-port-range": {
+                            "lower-port": test_vars["l4"]["classify_src"],
+                            "upper-port": test_vars["l4"]["classify_src"] + 50
+                        }
                     },
                     "actions": {
                         "deny": {}
                     }
                 }]}
             }]
+        },
+        "multirule": {
+            "acl": [{
+                "acl-type":
+                    "ietf-access-control-list:eth-acl",
+                "acl-name": name,
+                "access-list-entries": {"ace": [
+                    {
+                        "rule-name": "rule1",
+                        "matches": {
+                            "source-mac-address":
+                                test_vars["multirule"]["classify_src"],
+                            "source-mac-address-mask":
+                                test_vars["multirule"]["src_mask"],
+                            "destination-mac-address":
+                                test_vars["multirule"]["classify_dst"],
+                            "destination-mac-address-mask":
+                                test_vars["multirule"]["dst_mask"]
+                        },
+                        "actions": {
+                            "deny": {}
+                        }
+                    },
+                    {
+                        "rule-name": "rule2",
+                        "matches": {
+                            "source-mac-address":
+                                test_vars["multirule"]["classify_src2"],
+                            "source-mac-address-mask":
+                                test_vars["multirule"]["src_mask"],
+                            "destination-mac-address":
+                                test_vars["multirule"]["classify_dst2"],
+                            "destination-mac-address-mask":
+                                test_vars["multirule"]["dst_mask"]
+                        },
+                        "actions": {
+                            "deny": {}
+                        }
+                    },
+                    {
+                        "rule-name": "rule3",
+                        "matches": {
+                            "source-mac-address":
+                                variables["src_mac"],
+                            "source-mac-address-mask":
+                                test_vars["multirule"]["src_mask"],
+                            "destination-mac-address":
+                                variables["dst_mac"],
+                            "destination-mac-address-mask":
+                                test_vars["multirule"]["dst_mask"]
+                        },
+                        "actions": {
+                            "permit": {}
+                        }
+                    }
+                ]}
+            }]
         }
     }
     try:
-        variables.update(test_vars[test_case])
-        variables.update(
+        ret_vars = {}
+        ret_vars.update(variables)
+        ret_vars.update(test_vars[test_case])
+        ret_vars.update(
             {"acl_settings": acl_data[test_case]}
         )
     except KeyError:
         raise Exception("Unrecognized test case {0}."
                         " Valid options are: {1}".format(
                             test_case, acl_data.keys()))
-    return variables
+    return ret_vars
index be6ea16..93a0e70 100644 (file)
@@ -22,7 +22,9 @@
 | ${acl_name_l2}= | acl_l2
 | ${acl_name_l3_ip4}= | acl_l3_ip4
 | ${acl_name_l3_ip6}= | acl_l3_ip6
+| ${acl_name_l4}= | acl_l4
 | ${acl_name_mixed}= | acl_mixed
+| ${acl_name_multirule}= | acl_multirule
 
 *** Settings ***
 | Resource | resources/libraries/robot/default.robot
@@ -47,7 +49,7 @@
 | Force Tags | Honeycomb_sanity
 
 *** Test Cases ***
-| TC01: Honeycomb can configure L2 ACL MAC filtering through IETF-ACL node
+| TC01: L2 ACL MAC filtering through IETF-ACL node
 | | [Documentation]
 | | ... | [Top] TG=DUT1=TG.
 | | ... | [Enc] Eth-IPv4-TCP.
 | | ... | using different MACs. Receive all packets except those with\
 | | ... | MACs in the filtered ranges.
 | | [Teardown] | Run Keywords
-| | ... | Clear IETF-ACL settings | ${node} | ${dut_to_tg_if1} | AND
-| | ... | Show Packet Trace on All DUTs | ${nodes} | AND
-| | ... | Honeycomb removes all bridge domains
+| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if1} | AND
+| | ... | Show Packet Trace On All DUTs | ${nodes} | AND
+| | ... | Honeycomb Removes All Bridge Domains
 | | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2}
-| | Given Setup interfaces and bridge domain for ietf-ACL test
+| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test
 | | ... | L2 | ${acl_name_l2}
-| | When Honeycomb creates ACL chain through IETF node
+| | When Honeycomb Creates ACL Chain Through IETF Node
 | | ... | ${dut_node} | ${acl_name_l2} | L2 | ${acl_settings}
-| | And Honeycomb assigns IETF-ACL chain to interface
+| | And Honeycomb Assigns IETF-ACL Chain To Interface
 | | ... | ${dut_node} | ${dut_to_tg_if1} | L2 | ingress | ${acl_name_l2}
 | | ... | permit
-| | Then Send TCP or UDP packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
 | | ... | ${tg_to_dut_if1} | ${src_mac}
 | | ... | ${tg_to_dut_if2} | ${dst_mac}
 | | ... | TCP | ${src_port} | ${dst_port}
-| | And Run keyword and expect error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
 | | ... | ${tg_to_dut_if1} | ${classify_src}
 | | ... | ${tg_to_dut_if2} | ${classify_dst}
 | | ... | TCP | ${src_port} | ${dst_port}
-| | And Run keyword and expect error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
 | | ... | ${tg_to_dut_if1} | ${classify_src2}
 | | ... | ${tg_to_dut_if2} | ${classify_dst2}
 | | ... | TCP | ${src_port} | ${dst_port}
 
-| TC02: Honeycomb can configure L3 ACL IPv4 filtering through IETF-ACL node
+| TC02: L2 ACL MAC filtering through IETF-ACL node on egress interface
+| | [Documentation]
+| | ... | [Top] TG=DUT1=TG.
+| | ... | [Enc] Eth-IPv4-TCP.
+| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\
+| | ... | and configure L2 MAC ACL on egress interface.
+| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\
+| | ... | using different MACs. Receive all packets except those with\
+| | ... | MACs in the filtered ranges.
+| | [Teardown] | Run Keywords
+| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if2} | AND
+| | ... | Show Packet Trace On All DUTs | ${nodes} | AND
+| | ... | Honeycomb Removes All Bridge Domains
+| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2}
+| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test
+| | ... | L2 | ${acl_name_l2}
+| | When Honeycomb Creates ACL Chain Through IETF Node
+| | ... | ${dut_node} | ${acl_name_l2} | L2 | ${acl_settings}
+| | And Honeycomb Assigns IETF-ACL Chain To Interface
+| | ... | ${dut_node} | ${dut_to_tg_if2} | L2 | egress | ${acl_name_l2}
+| | ... | permit
+| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${src_mac}
+| | ... | ${tg_to_dut_if2} | ${dst_mac}
+| | ... | TCP | ${src_port} | ${dst_port}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${classify_src}
+| | ... | ${tg_to_dut_if2} | ${classify_dst}
+| | ... | TCP | ${src_port} | ${dst_port}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${classify_src2}
+| | ... | ${tg_to_dut_if2} | ${classify_dst2}
+| | ... | TCP | ${src_port} | ${dst_port}
+
+| TC03: L3 ACL IPv4 filtering through IETF-ACL node
 | | [Documentation]
 | | ... | [Top] TG=DUT1=TG.
 | | ... | [Enc] Eth-IPv4-TCP.
 | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\
 | | ... | to the other, using different IPv4 IPs. Receive all packets except\
 | | ... | those with IPs in the filtered ranges and UDP protocol payload.
-| | Given Setup interface IPs and routes for IPv4 ietf-ACL test
+| | Given Setup Interface IPs And Routes For IPv4 IETF-ACL Test
 | | ... | L3_IP4 | ${acl_name_l3_ip4}
-| | When Honeycomb creates ACL chain through IETF node
+| | When Honeycomb Creates ACL Chain Through IETF Node
 | | ... | ${dut_node} | ${acl_name_l3_ip4} | L3_IP4 | ${acl_settings}
-| | And Honeycomb assigns IETF-ACL chain to interface
+| | And Honeycomb Assigns IETF-ACL Chain To Interface
 | | ... | ${dut_node} | ${dut_to_tg_if1} | L3_IP4 | ingress | ${acl_name_l3_ip4}
 | | ... | permit
-| | Then Send TCP or UDP packet | ${tg_node}
+| | Then Send TCP Or UDP Packet | ${tg_node}
 | | ... | ${src_ip} | ${dst_ip}
 | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
 | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
 | | ... | UDP | ${src_port} | ${dst_port}
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP Or UDP Packet | ${tg_node}
 | | ... | ${classify_src} | ${classify_dst}
 | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
 | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
 | | ... | TCP | ${src_port} | ${dst_port}
-| | And Run keyword and expect error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet | ${tg_node}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node}
 | | ... | ${classify_src} | ${classify_dst}
 | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
 | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
 | | ... | UDP | ${src_port} | ${dst_port}
 
-| TC03: Honeycomb can configure L3 ACL IPv6 filtering through IETF-ACL node
+| TC04: L3 ACL IPv6 filtering through IETF-ACL node
 | | [Documentation]
 | | ... | [Top] TG=DUT1=TG.
 | | ... | [Enc] Eth-IPv4-TCP.
 | | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False
 | | And VPP Route Add | ${node} | ${classify_dst_net} | ${prefix_length}
 | | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False
-| | When Honeycomb creates ACL chain through IETF node
+| | When Honeycomb Creates ACL Chain Through IETF Node
 | | ... | ${dut_node} | ${acl_name_l3_ip6} | L3_IP6 | ${acl_settings}
-| | And Honeycomb assigns IETF-ACL chain to interface
+| | And Honeycomb Assigns IETF-ACL Chain To Interface
 | | ... | ${dut_node} | ${dut_to_tg_if1} | L3_IP6 | ingress | ${acl_name_l3_ip6}
 | | ... | permit
-| | Then Send TCP or UDP packet | ${tg_node}
+| | Then Send TCP Or UDP Packet | ${tg_node}
 | | ... | ${src_ip} | ${dst_ip}
 | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
 | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
 | | ... | UDP | ${src_port} | ${dst_port}
-| | And Send TCP or UDP packet | ${tg_node}
+| | And Send TCP Or UDP Packet | ${tg_node}
 | | ... | ${classify_src} | ${classify_dst}
 | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
 | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
 | | ... | TCP | ${src_port} | ${dst_port}
-| | And Run keyword and expect error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet | ${tg_node}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node}
 | | ... | ${classify_src} | ${classify_dst}
 | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
 | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
 | | ... | UDP | ${src_port} | ${dst_port}
 
-| TC04: Honeycomb can configure L2 and L3 ACL on L2-mode interface
+| TC05: L4 ACL port filtering through IETF-ACL node
+| | [Documentation]
+| | ... | [Top] TG=DUT1=TG.
+| | ... | [Enc] Eth-IPv4-TCP.
+| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\
+| | ... | interfaces to TG, add ARP entry and routes, and configure L4 port ACL\
+| | ... | on ingress interface with src/dst port ranges.
+| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\
+| | ... | to the other, using different ports. Receive all packets except\
+| | ... | those with ports in the filtered ranges.
+| | Given Setup Interface IPs And Routes For IPv4 IETF-ACL Test
+| | ... | L4 | ${acl_name_l4}
+| | When Honeycomb Creates ACL Chain Through IETF Node
+| | ... | ${dut_node} | ${acl_name_l4} | mixed | ${acl_settings}
+| | And Honeycomb Assigns IETF-ACL Chain To Interface
+| | ... | ${dut_node} | ${dut_to_tg_if1} | mixed | ingress | ${acl_name_l4}
+| | ... | permit | L3
+| | Then Send TCP Or UDP Packet | ${tg_node}
+| | ... | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
+| | ... | TCP | ${src_port} | ${dst_port}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
+| | ... | TCP | ${classify_src} | ${classify_dst}
+
+| TC06: L2,L3 and L4 ACL together on L2-mode interface
 | | [Documentation]
 | | ... | [Top] TG=DUT1=TG.
 | | ... | [Enc] Eth-IPv4-TCP.
 | | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\
-| | ... | and configure L2 and L3 ACL on ingress interface\
-| | ... | with src/dst MAC, src/dst IP and protocol.
+| | ... | and configure L2, L3 and L4 ACL on ingress interface\
+| | ... | with src/dst MAC, src/dst IP, protocol and src/dst port ranges.
 | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\
-| | ... | to the other, using different MACs and IPv4 IPs. Receive all packets\
-| | ... | except those with MACs and IPs in the filtered ranges and UDP\
-| | ... | protocol payload.
+| | ... | to the other, using different MACs, IPv4 IPs and ports. Receive\
+| | ... | all packets except those with MACs, IPs and ports in the filtered\
+| | ... | ranges and UDP protocol payload.
 | | [Teardown] | Run Keywords
-| | ... | Clear IETF-ACL settings | ${node} | ${dut_to_tg_if1} | AND
-| | ... | Show Packet Trace on All DUTs | ${nodes} | AND
-| | ... | Honeycomb removes all bridge domains
+| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if1} | AND
+| | ... | Show Packet Trace On All DUTs | ${nodes} | AND
+| | ... | Honeycomb Removes All Bridge Domains
 | | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2}
-| | Given Setup interfaces and bridge domain for ietf-ACL test
+| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test
 | | ... | mixed | ${acl_name_mixed}
-| | When Honeycomb creates ACL chain through IETF node
+| | When Honeycomb Creates ACL Chain Through IETF Node
 | | ... | ${dut_node} | ${acl_name_mixed} | mixed | ${acl_settings}
-| | And Honeycomb assigns IETF-ACL chain to interface
+| | And Honeycomb Assigns IETF-ACL Chain To Interface
 | | ... | ${dut_node} | ${dut_to_tg_if1} | mixed | ingress | ${acl_name_mixed}
 | | ... | permit | L2
-| | Then Send TCP or UDP packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
 | | ... | ${tg_to_dut_if1} | ${classify_src_mac}
 | | ... | ${tg_to_dut_if2} | ${classify_dst_mac}
 | | ... | TCP | ${src_port} | ${dst_port}
-| | And Send TCP or UDP packet | ${tg_node}
-| | ... | ${classify_src_ip} | ${classify_dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | UDP | ${src_port} | ${dst_port}
-| | And Run keyword and expect error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet | ${tg_node}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node}
 | | ... | ${classify_src_ip} | ${classify_dst_ip}
 | | ... | ${tg_to_dut_if1} | ${classify_src_mac}
 | | ... | ${tg_to_dut_if2} | ${classify_dst_mac}
-| | ... | UDP | ${src_port} | ${dst_port}
+| | ... | UDP | ${classify_src_port} | ${classify_dst_port}
 
-| TC05: Honeycomb can configure L2 and L3 ACL on L3-mode interface
+| TC07: L2,L3 and L4 ACL together on L3-mode interface
 | | [Documentation]
 | | ... | [Top] TG=DUT1=TG.
 | | ... | [Enc] Eth-IPv4-TCP.
 | | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\
 | | ... | interfaces to TG, add ARP entry and routes, and configure\
-| | ... | L2 and L3 ACL on ingress interface with src/dst MAC, src/dst IP\
-| | ... | and protocol.
+| | ... | L2, L3 and L4 ACL on ingress interface with src/dst MAC, src/dst IP,\
+| | ... | protocol and src/dst port ranges.
 | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\
-| | ... | to the other, using different MACs and IPv4 IPs. Receive all packets\
-| | ... | except those with MACs and IPs in the filtered ranges and UDP\
-| | ... | protocol payload.
-| | Setup interface IPs and routes for IPv4 ietf-ACL test
+| | ... | to the other, using different MACs, IPv4 IPs and ports. Receive\
+| | ... | all packets except those with MACs, IPs and ports in the filtered\
+| | ... | ranges and UDP protocol payload.
+| | Setup Interface IPs And Routes For IPv4 IETF-ACL Test
 | | ... | mixed | ${acl_name_mixed}
-| | When Honeycomb creates ACL chain through IETF node
+| | When Honeycomb Creates ACL Chain Through IETF Node
 | | ... | ${dut_node} | ${acl_name_mixed} | mixed | ${acl_settings}
-| | And Honeycomb assigns IETF-ACL chain to interface
+| | And Honeycomb Assigns IETF-ACL Chain To Interface
 | | ... | ${dut_node} | ${dut_to_tg_if1} | mixed | ingress | ${acl_name_mixed}
 | | ... | permit | L3
-| | Then Send TCP or UDP packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
 | | ... | ${tg_to_dut_if1} | ${classify_src_mac}
 | | ... | ${tg_to_dut_if2} | ${classify_dst_mac}
 | | ... | TCP | ${src_port} | ${dst_port}
-| | And Send TCP or UDP packet | ${tg_node}
-| | ... | ${classify_src_ip} | ${classify_dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | UDP | ${src_port} | ${dst_port}
-| | And Run keyword and expect error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet | ${tg_node}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node}
 | | ... | ${classify_src_ip} | ${classify_dst_ip}
 | | ... | ${tg_to_dut_if1} | ${classify_src_mac}
 | | ... | ${tg_to_dut_if2} | ${classify_dst_mac}
-| | ... | UDP | ${src_port} | ${dst_port}
+| | ... | UDP | ${classify_src_port} | ${classify_dst_port}
 
-# TODO: Test case for L4 ACL port-based filtering
-# TODO: Test case for multiple classify rules and rule ordering
+| TC08: Multiple classify rules in one ACL
+| | [Documentation]
+| | ... | [Top] TG=DUT1=TG.
+| | ... | [Enc] Eth-IPv4-TCP.
+| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\
+| | ... | and configure a series of L2 MAC ACL rules on ingress interface.
+| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\
+| | ... | using different MACs. Receive all packets except those with\
+| | ... | MACs in the ranges filtered by any rule.
+| | [Teardown] | Run Keywords
+| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if1} | AND
+| | ... | Show Packet Trace On All DUTs | ${nodes} | AND
+| | ... | Honeycomb Removes All Bridge Domains
+| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2}
+| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test
+| | ... | multirule | ${acl_name_multirule}
+| | When Honeycomb Creates ACL Chain Through IETF Node
+| | ... | ${dut_node} | ${acl_name_multirule} | L2 | ${acl_settings}
+| | And Honeycomb Assigns IETF-ACL Chain To Interface
+| | ... | ${dut_node} | ${dut_to_tg_if1} | L2 | ingress | ${acl_name_multirule}
+| | ... | permit
+| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${src_mac}
+| | ... | ${tg_to_dut_if2} | ${dst_mac}
+| | ... | TCP | ${src_port} | ${dst_port}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${classify_src}
+| | ... | ${tg_to_dut_if2} | ${classify_dst}
+| | ... | TCP | ${src_port} | ${dst_port}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${classify_src2}
+| | ... | ${tg_to_dut_if2} | ${classify_dst2}
+| | ... | TCP | ${src_port} | ${dst_port}
 
 *** Keywords ***
 | Setup interface IPs and routes for IPv4 ietf-ACL test

©2016 FD.io a Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation. Linux is a registered trademark of Linus Torvalds.
Please see our privacy policy and terms of use.