doc: fixing documentation structure

When building documentation using sphinx we see ~1200 similar warnings [0]
[0] - https://s3-logs.fd.io/vex-yul-rot-jenkins-1/csit-verify-tox-master-ubuntu2004-x86_64/3289/doc_verify.log.gz

These warning are harmless and can be fixed later

Signed-off-by: Viliam Luc <vluc@cisco.com>
Change-Id: I1ac1099d38935971d47491dde905715345d3935c

diff --git a/resources/libraries/bash/function/docs.sh b/resources/libraries/bash/function/docs.sh
index c589416..cb3f36d 100644 (file)
--- a/resources/libraries/bash/function/docs.sh
+++ b/resources/libraries/bash/function/docs.sh
@@ -89,6 +89,9 @@ function generate_docs () {
         die "rSync failed!"
     }
 
+    # to remove GPL licence section
+    find "${WORKING_DIR}/tests/" -type f -exec sed -i '/\*\*\*/,$!d' {} \;
+
     find ${WORKING_DIR}/ -type d -exec echo {} \; -exec touch {}/__init__.py \;
 
     python3 gen_rst.py || die "Generate .rst files failed!"

diff --git a/resources/libraries/python/Constants.py b/resources/libraries/python/Constants.py
index c6c9bca..c14ba31 100644 (file)
--- a/resources/libraries/python/Constants.py
+++ b/resources/libraries/python/Constants.py
@@ -428,23 +428,24 @@ class Constants:
     }
 
     PERF_TYPE_TO_SUITE_DOC_VER = {
-        u"mrr": u'''fication:* In MaxReceivedRate tests TG sends traffic\\
-| ... | at line rate and reports total received packets over trial period.\\''',
-        u"ndrpdr": u'''ication:* TG finds and reports throughput NDR (Non Drop\\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\\
-| ... | of packets transmitted. NDR and PDR are discovered for different\\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\\''',
-        u"soak": u'''fication:* TG sends traffic at dynamically computed\\
-| ... | rate as PLRsearch algorithm gathers data and improves its estimate\\
-| ... | of a rate at which a prescribed small fraction of packets\\
-| ... | would be lost. After set time, the serarch stops\\
-| ... | and the algorithm reports its current estimate.\\''',
+        u"mrr": u'''fication:** In MaxReceivedRate tests TG sends traffic at \\
+| ... | line rate and reports total received packets over trial period. \\''',
+        u"ndrpdr": u'''rification:** TG finds and reports throughput NDR (Non \\
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \\
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \\
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \\
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \\
+| ... | library.''',
+        u"soak": u'''rification:** TG sends traffic at dynamically computed \\
+| ... | rate as PLRsearch algorithm gathers data and improves its estimate \\
+| ... | of a rate at which a prescribed small fraction of packets \\
+| ... | would be lost. After set time, the serarch stops \\
+| ... | and the algorithm reports its current estimate. \\''',
     }
 
     PERF_TYPE_TO_TEMPLATE_DOC_VER = {
-        u"mrr": u'''Measure MaxReceivedRate for ${frame_size}B frames\\
-| | ... | using burst trials throughput test.\\''',
-        u"ndrpdr": u"Measure NDR and PDR values using MLRsearch algorithm.\\",
-        u"soak": u"Estimate critical rate using PLRsearch algorithm.\\",
+        u"mrr": u'''Measure MaxReceivedRate for ${frame_size}B frames \\
+| | ... | using burst trials throughput test. \\''',
+        u"ndrpdr": u"Measure NDR and PDR values using MLRsearch algorithm.",
+        u"soak": u"Estimate critical rate using PLRsearch algorithm. \\",
     }

diff --git a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot
index b556c7f..c808d4f 100644 (file)
--- a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot
+++ b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot
@@ -27,22 +27,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Raw results L2 routing test cases*
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 frame forwarding.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK testpmd\
-| ... | application and use the io forwarding mode. DUT1 and DUT2 tested with\
-| ... | ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with\
-| ... | all packets containing Ethernet header,IPv4 header with static payload.\
+| Documentation | **Raw results L2 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 frame forwarding.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 run the DPDK testpmd \
+| ... | application and use the io forwarding mode. DUT1 and DUT2 are tested \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all \
+| ... | packets containing Ethernet header, IPv4 header with static payload \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
 
 *** Variables ***
@@ -61,9 +66,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config.\
+| | ... | - **[Cfg]** DUT runs L2 frame forwarding config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
 | |

diff --git a/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot b/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot
index ea4483f..a99a7f6 100644 (file)
--- a/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot
+++ b/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot
@@ -27,22 +27,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Raw results IPv4 routing test cases*
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L3 IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK l3fwd application\
-| ... | DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| Documentation | **Raw results IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L3 IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 run the DPDK l3fwd \
+| ... | application. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
 
 *** Variables ***
@@ -61,9 +66,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs L3 IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
 | |

diff --git a/tests/dpdk/perf/2n1l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot b/tests/dpdk/perf/2n1l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot
index aa62fe5..467db2e 100644 (file)
--- a/tests/dpdk/perf/2n1l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot
+++ b/tests/dpdk/perf/2n1l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot
@@ -27,22 +27,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Raw results L2 routing test cases*
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **Raw results L2 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 frame forwarding.
-| ... | *[Cfg] DUT configuration:* DUT1 run the DPDK testpmd\
-| ... | application and use the io forwarding mode. DUT1 tested with\
-| ... | ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with\
-| ... | all packets containing Ethernet header,IPv4 header with static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 frame forwarding.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 run the DPDK testpmd \
+| ... | application and use the io forwarding mode. DUT1 tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all \
+| ... | packets containing Ethernet header, IPv4 header with static payload \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
 
 *** Variables ***
@@ -61,9 +66,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config.\
+| | ... | - **[Cfg]** DUT runs L2 frame forwarding config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
 | |

diff --git a/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot b/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot
index fe9734a..ce96f2f 100644 (file)
--- a/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot
+++ b/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot
@@ -27,22 +27,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Raw results IPv4 routing test cases*
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 3-node circular topology\
+| Documentation | **Raw results IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 3-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L3 IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 run the DPDK l3fwd application\
-| ... | DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L3 IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 run the DPDK l3fwd application \
+| ... | DUT1 tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
 
 *** Variables ***
@@ -61,9 +66,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs L3 IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
 | |

diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4-ip4base-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4-ip4base-tg-ndrpdr.robot
index 02fd577..76d4839 100644 (file)
--- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4-ip4base-tg-ndrpdr.robot
+++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4-ip4base-tg-ndrpdr.robot
@@ -25,23 +25,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput for cross connected NICs with IPv4
-| ... | traffic profile.
-|
-| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\
+| Documentation | **RFC2544: Pkt throughput for cross connected NICs with \
+| ... | IPv4 traffic profile.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to TG.\
-| ... | TG traffic profile contains two L3 flow-groups (flow-group per\
-| ... | direction, 254 flows per flow-group) with all packets containing\
-| ... | Ethernet header, IPv4 header with static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to TG. \
+| ... | TG traffic profile contains two L3 flow-groups (flow-group per \
+| ... | direction, 254 flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | ${nic_name}= | Intel-X710
@@ -54,8 +58,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] TG runs L1 cross connect config.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** TG runs L1 cross connect config.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4-ip4scale2m-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4-ip4scale2m-tg-ndrpdr.robot
index 03a93c6..0d7ae91 100644 (file)
--- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4-ip4scale2m-tg-ndrpdr.robot
+++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4-ip4scale2m-tg-ndrpdr.robot
@@ -25,23 +25,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput for cross connected NICs with IPv4
-| ... | traffic profile.
-|
-| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\
+| Documentation | **RFC2544: Pkt throughput for cross connected NICs with \
+| ... | IPv4 traffic profile.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \
 | ... | with single links between.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to TG.\
-| ... | TG traffic profile contains two L3 flow-groups (flow-group per\
-| ... | direction, 1M flows per flow-group) with all packets containing\
-| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to TG. \
+| ... | TG traffic profile contains two L3 flow-groups (flow-group per \
+| ... | direction, 1M flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | ${nic_name}= | Intel-X710
@@ -55,8 +59,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] TG runs L1 cross connect config.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** TG runs L1 cross connect config.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr.robot
index 65ef254..5de1443 100644 (file)
--- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr.robot
+++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr.robot
@@ -26,22 +26,26 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty TCP transactions with L1 cross connect*
-|
-| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\
+| Documentation | **CPS on empty TCP transactions with L1 cross connect**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to TG.\
-| ... | TG traffic profile contain L7 flows (${cps} bi-directional TCP flows)\
-| ... | with all packets containing Ethernet header, IPv4 header with TCP\
-| ... | header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to TG. \
+| ... | TG traffic profile contain L7 flows (${cps} bi-directional TCP flows) \
+| ... | with all packets containing Ethernet header, IPv4 header with TCP \
+| ... | header and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | ${nic_name}= | Intel-X710
@@ -62,8 +66,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] TG runs L1 cross connect config.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** TG runs L1 cross connect config.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot
index 0775768..6fa25a5 100644 (file)
--- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot
+++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot
@@ -26,22 +26,26 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight TCP transactions with L1 cross connect*
-|
-| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\
+| Documentation | **PPS on lightweight TCP transactions with L1 cross connect**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to TG.\
-| ... | TG traffic profile contains client and server ASTF programs,\
-| ... | generating packets containing Ethernet header, IPv4 header,\
-| ... | TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to TG. \
+| ... | TG traffic profile contains client and server ASTF programs, \
+| ... | generating packets containing Ethernet header, IPv4 header, \
+| ... | TCP header and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | ${nic_name}= | Intel-X710
@@ -61,8 +65,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] TG runs L1 cross connect config.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** TG runs L1 cross connect config.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr.robot
index 64a5a88..66ef7e8 100644 (file)
--- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr.robot
+++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr.robot
@@ -25,22 +25,26 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty TCP transactions with L1 cross connect*
-|
-| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\
+| Documentation | **CPS on empty TCP transactions with L1 cross connect**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to TG.\
-| ... | TG traffic profile contain L7 flows (${cps} bi-directional TCP flows)\
-| ... | with all packets containing Ethernet header, IPv4 header with TCP\
-| ... | header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to TG. \
+| ... | TG traffic profile contain L7 flows (${cps} bi-directional TCP flows) \
+| ... | with all packets containing Ethernet header, IPv4 header with TCP \
+| ... | header and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | ${nic_name}= | Intel-X710
@@ -61,8 +65,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] TG runs L1 cross connect config.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** TG runs L1 cross connect config.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot
index 23c3409..afed633 100644 (file)
--- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot
+++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot
@@ -26,22 +26,26 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight TCP transactions with L1 cross connect*
-|
-| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\
+| Documentation | **PPS on lightweight TCP transactions with L1 cross connect**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to TG.\
-| ... | TG traffic profile contains client and server ASTF programs,\
-| ... | generating packets containing Ethernet header, IPv4 header,\
-| ... | TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to TG. \
+| ... | TG traffic profile contains client and server ASTF programs, \
+| ... | generating packets containing Ethernet header, IPv4 header, \
+| ... | TCP header and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | ${nic_name}= | Intel-X710
@@ -61,8 +65,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] TG runs L1 cross connect config.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** TG runs L1 cross connect config.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr.robot
index 81ac720..d73bd9b 100644 (file)
--- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr.robot
+++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr.robot
@@ -25,22 +25,26 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty UDP transactions with L1 cross connect*
-|
-| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\
+| Documentation | **CPS on empty UDP transactions with L1 cross connect**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to TG.\
-| ... | TG traffic profile contain L7 flows (${cps} bi-directional UDP flows)\
-| ... | with all packets containing Ethernet header, IPv4 header with UDP\
-| ... | header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to TG. \
+| ... | TG traffic profile contain L7 flows (${cps} bi-directional UDP flows) \
+| ... | with all packets containing Ethernet header, IPv4 header with UDP \
+| ... | header and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | ${nic_name}= | Intel-X710
@@ -59,8 +63,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] TG runs L1 cross connect config.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** TG runs L1 cross connect config.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot
index 7083840..bbf66e0 100644 (file)
--- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot
+++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot
@@ -26,22 +26,26 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight UDP transactions with L1 cross connect*
-|
-| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\
+| Documentation | **PPS on lightweight UDP transactions with L1 cross connect**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to TG.\
-| ... | TG traffic profile contains client and server ASTF programs,\
-| ... | generating packets containing Ethernet header, IPv4 header,\
-| ... | UDP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to TG. \
+| ... | TG traffic profile contains client and server ASTF programs, \
+| ... | generating packets containing Ethernet header, IPv4 header, \
+| ... | UDP header and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | ${nic_name}= | Intel-X710
@@ -61,8 +65,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] TG runs L1 cross connect config.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** TG runs L1 cross connect config.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr.robot
index 42cdadc..41d4931 100644 (file)
--- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr.robot
+++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr.robot
@@ -25,22 +25,26 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty UDP transactions with L1 cross connect*
-|
-| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\
+| Documentation | **CPS on empty UDP transactions with L1 cross connect**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to TG.\
-| ... | TG traffic profile contain L7 flows (${cps} bi-directional UDP flows)\
-| ... | with all packets containing Ethernet header, IPv4 header with UDP\
-| ... | header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to TG. \
+| ... | TG traffic profile contain L7 flows (${cps} bi-directional UDP flows) \
+| ... | with all packets containing Ethernet header, IPv4 header with UDP \
+| ... | header and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | ${nic_name}= | Intel-X710
@@ -59,8 +63,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] TG runs L1 cross connect config.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** TG runs L1 cross connect config.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot
index 2fd9640..ecb4841 100644 (file)
--- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot
+++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot
@@ -25,22 +25,26 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *PPS on lightweight UDP transactions with L1 cross connect*
-|
-| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\
+| Documentation | **PPS on lightweight UDP transactions with L1 cross connect**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to TG.\
-| ... | TG traffic profile contains client and server ASTF programs,\
-| ... | generating packets containing Ethernet header, IPv4 header,\
-| ... | TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to TG. \
+| ... | TG traffic profile contains client and server ASTF programs, \
+| ... | generating packets containing Ethernet header, IPv4 header, \
+| ... | TCP header and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | ${nic_name}= | Intel-X710
@@ -60,8 +64,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] TG runs L1 cross connect config.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** TG runs L1 cross connect config.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/trex/perf/ip6/1n1l-10ge2p1x710-ethip6-ip6base-tg-ndrpdr.robot b/tests/trex/perf/ip6/1n1l-10ge2p1x710-ethip6-ip6base-tg-ndrpdr.robot
index 9ee49f8..9788baa 100644 (file)
--- a/tests/trex/perf/ip6/1n1l-10ge2p1x710-ethip6-ip6base-tg-ndrpdr.robot
+++ b/tests/trex/perf/ip6/1n1l-10ge2p1x710-ethip6-ip6base-tg-ndrpdr.robot
@@ -25,23 +25,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput for cross connected NICs with IPv6
-| ... | traffic profile.
-|
-| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\
+| Documentation | **RFC2544: Pkt throughput for cross connected NICs with IPv6 \
+| ... | traffic profile.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \
 | ... | with single link between.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for L1 cross connect patch.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to TG.\
-| ... | TG traffic profile contains two L3 flow-groups (flow-group per\
-| ... | direction, 1M flows per flow-group) with all packets containing\
-| ... | Ethernet header, IPv6 header with static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for L1 cross connect patch.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to TG. \
+| ... | TG traffic profile contains two L3 flow-groups (flow-group per \
+| ... | direction, 1M flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv6 header with static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | ${nic_name}= | Intel-X710
@@ -54,8 +58,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] TG runs L1 cross connect config.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** TG runs L1 cross connect config.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/trex/perf/ip6/1n1l-10ge2p1x710-ethip6-ip6scale2m-tg-ndrpdr.robot b/tests/trex/perf/ip6/1n1l-10ge2p1x710-ethip6-ip6scale2m-tg-ndrpdr.robot
index b0ccc1e..fcdcfea 100644 (file)
--- a/tests/trex/perf/ip6/1n1l-10ge2p1x710-ethip6-ip6scale2m-tg-ndrpdr.robot
+++ b/tests/trex/perf/ip6/1n1l-10ge2p1x710-ethip6-ip6scale2m-tg-ndrpdr.robot
@@ -25,23 +25,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput for cross connected NICs with IPv6
-| ... | traffic profile.
-|
-| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology
+| Documentation | **RFC2544: Pkt throughput for cross connected NICs with IPv6 \
+| ... | traffic profile.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \
 | ... | with single link between.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for L1 cross connect patch.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to TG.\
-| ... | TG traffic profile contains two L3 flow-groups (flow-group per\
-| ... | direction, 254 flows per flow-group) with all packets containing\
-| ... | Ethernet header, IPv6 header with static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for L1 cross connect patch.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to TG. \
+| ... | TG traffic profile contains two L3 flow-groups (flow-group per \
+| ... | direction, 254 flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv6 header with static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | ${nic_name}= | Intel-X710
@@ -55,8 +59,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] TG runs L1 cross connect config.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** TG runs L1 cross connect config.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/trex/perf/l2/1n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-tg-ndrpdr.robot b/tests/trex/perf/l2/1n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-tg-ndrpdr.robot
index f34b07d..ed89f95 100644 (file)
--- a/tests/trex/perf/l2/1n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-tg-ndrpdr.robot
+++ b/tests/trex/perf/l2/1n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-tg-ndrpdr.robot
@@ -25,27 +25,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput for cross connected NICs with IPv4
-| ... | traffic profile.
-|
-| ... | *[Top] Network Topologies:* TG-TG 1-node circular topology\
+| Documentation | **RFC2544: Pkt throughput for cross connected NICs with \
+| ... | IPv4 traffic profile.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-TG 1-node circular topology \
 | ... | with single link between.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L1 cross connect patch.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to TG.\
-| ... | TG traffic profile contains two L3 flow-groups (flow-group per\
-| ... | direction, 500k flows per flow-group) with all packets containing\
-| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L1 cross connect patch.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to TG. \
+| ... | TG traffic profile contains two L3 flow-groups (flow-group per \
+| ... | direction, 500k flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
 | ... | MAC addresses ranges are incremented as follows:
 | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f,
 | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f,
 | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f,
 | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | ${nic_name}= | Intel-X710
@@ -58,8 +62,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] TG runs L1 cross connect config.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** TG runs L1 cross connect config.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-scapy.robot b/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-scapy.robot
index ffb12e1..0ae1ecb 100644 (file)
--- a/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-scapy.robot
+++ b/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-scapy.robot
@@ -25,20 +25,25 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 routing test cases with memif interface*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing on both links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
-| ... | two static IPv4 /24 route entries. Container is connected to VPP via \
-| ... | Memif interface. Container is running same VPP version as running on \
-| ... | DUT.
-| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 are \
+| Documentation | **IPv4 routing test cases with memif interface**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing on both \
+| ... | links.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and two static IPv4 /24 route entries. Container is connected to VPP \
+| ... | via Memif interface. Container is running same VPP version as running \
+| ... | on DUT.
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 are \
 | ... | sent in one direction by TG on links to DUT1 and via container; on \
 | ... | receive TG verifies packets for correctness and their IPv4 src-addr, \
 | ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC791, RFC826, RFC792
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -59,8 +64,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IPv4 packet in both directions between two\
-| | ... | of its interfaces to be routed by DUT to and from docker; verify\
+| | ... | - **[Ver]** Make TG send IPv4 packet in both directions between two \
+| | ... | of its interfaces to be routed by DUT to and from docker; verify \
 | | ... | all packets are received.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2memif-1dcr-scapy.robot b/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2memif-1dcr-scapy.robot
index fdcea35..5b2c0a8 100644 (file)
--- a/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2memif-1dcr-scapy.robot
+++ b/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2memif-1dcr-scapy.robot
@@ -25,20 +25,24 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *L2 bridge-domain test cases with memif interface*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
+| Documentation | **L2 bridge-domain test cases with memif interface**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
 | ... | Both apply to all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain \
-| ... | switching. Container is connected to VPP via Memif interface. \
-| ... | Container is running same VPP version as running on DUT.
-| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \
+| ... | bridge-domain switching. Container is connected to VPP via Memif \
+| ... | interface. Container is running same VPP version as running on DUT.
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 \
 | ... | are sent in both directions by TG on links to DUT1 and via container; \
-| ... | on receive TG verifies packets for correctness and their IPv4 \
+| ... | on receive TG verifies packets for correctness and their IPv4. \
 | ... | src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC792
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC792
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -59,8 +63,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IPv4 packets in both directions between two\
-| | ... | of its interfaces to be switched by DUT to and from docker; verify\
+| | ... | - **[Ver]** Make TG send IPv4 packets in both directions between two \
+| | ... | of its interfaces to be switched by DUT to and from docker; verify \
 | | ... | all packets are received.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2memif-1dcr-scapy.robot b/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2memif-1dcr-scapy.robot
index 1d09d87..82e9264 100644 (file)
--- a/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2memif-1dcr-scapy.robot
+++ b/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2memif-1dcr-scapy.robot
@@ -25,19 +25,23 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *L2 cross-connect test cases with memif interface*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \
-| ... | (L2XC) switching. Container is connected to VPP via Memif interface. \
-| ... | Container is running same VPP version as running on DUT.
-| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 \
+| Documentation | **L2 cross-connect test cases with memif interface**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross-\
+| ... | connect (L2XC) switching. Container is connected to VPP via Memif \
+| ... | interface. Container is running same VPP version as running on DUT.
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 \
 | ... | are sent in both directions by TG on links to DUT1 and via container; \
-| ... | on receive TG verifies packets for correctness and their IPv4 \
+| ... | on receive TG verifies packets for correctness and their IPv4. \
 | ... | src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC792
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC792
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -58,8 +62,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IPv4 packets in both directions between two\
-| | ... | of its interfaces to be switched by DUT to and from docker; verify\
+| | ... | - **[Ver]** Make TG send IPv4 packets in both directions between two \
+| | ... | of its interfaces to be switched by DUT to and from docker; verify \
 | | ... | all packets are received.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot
index e150c59..d2db9b0 100644 (file)
--- a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot
+++ b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot
@@ -26,16 +26,19 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 IPsec tunnel mode test suite.*
-|
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
+| Documentation | **IPv4 IPsec tunnel mode test suite.**
+| ... |
+| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\
-| ... | loopback an physical interface IPv4 addresses, static ARP record, route\
-| ... | and IPsec manual keyed connection in tunnel mode.
-| ... | *[Ver] TG verification:* ETH-IP4 packet is sent from TG to DUT1. Packet\
-| ... | is received on TG from DUT1.
-| ... | *[Ref] Applicable standard specifications:* RFC4303.
+| ... |
+| ... | - **[Cfg] DUT configuration:** On DUT1 create loopback interface, \
+| ... | configure loopback an physical interface IPv4 addresses, static ARP \
+| ... | record, route and IPsec manual keyed connection in tunnel mode.
+| ... |
+| ... | - **[Ver] TG verification:** ETH-IP4 packet is sent from TG to DUT1. \
+| ... | Packet is received on TG from DUT1.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -63,9 +66,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] On DUT1 configure IPsec tunnel interfaces with encryption\
-| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in tunnel\
-| | ... | mode.
+| | ... | - **[Cfg]** On DUT1 configure IPsec tunnel interfaces with \
+| | ... | encryption algorithm AES_128_CBC and integrity algorithm \
+| | ... | HMAC_SHA_512 in tunnel mode.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot
index 5756fa7..cf13223 100644 (file)
--- a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot
+++ b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot
@@ -26,16 +26,19 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 IPsec tunnel mode test suite.*
-|
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
+| Documentation | **IPv4 IPsec tunnel mode test suite.**
+| ... |
+| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\
-| ... | loopback an physical interface IPv4 addresses, static ARP record, route\
-| ... | and IPsec manual keyed connection in tunnel mode.
-| ... | *[Ver] TG verification:* ETH-IP4 packet is sent from TG to DUT1. Packet\
-| ... | is received on TG from DUT1.
-| ... | *[Ref] Applicable standard specifications:* RFC4303.
+| ... |
+| ... | - **[Cfg] DUT configuration:** On DUT1 create loopback interface, \
+| ... | configure loopback an physical interface IPv4 addresses, static ARP \
+| ... | irecord, route and IPsec manual keyed connection in tunnel mode.
+| ... |
+| ... | - **[Ver] TG verification:** ETH-IP4 packet is sent from TG to DUT1. \
+| ... | Packet is received on TG from DUT1.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -63,9 +66,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] On DUT1 configure IPsec tunnel interface with encryption\
-| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in tunnel\
-| | ... | mode.
+| | ... | - **[Cfg]** On DUT1 configure IPsec tunnel interface with encryption \
+| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in \
+| | ... | tunnel mode.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot
index ca55d02..b07545e 100644 (file)
--- a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot
+++ b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot
@@ -26,16 +26,19 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 IPsec tunnel mode test suite.*
-|
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
+| Documentation | **IPv4 IPsec tunnel mode test suite.**
+| ... |
+| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\
-| ... | loopback an physical interface IPv4 addresses, static ARP record, route\
-| ... | and IPsec manual keyed connection in tunnel mode.
-| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet\
-| ... | is received on TG from DUT1.
-| ... | *[Ref] Applicable standard specifications:* RFC4303.
+| ... |
+| ... | - **[Cfg] DUT configuration:** On DUT1 create loopback interface, \
+| ... | configure loopback an physical interface IPv4 addresses, static ARP \
+| ... | record, route and IPsec manual keyed connection in tunnel mode.
+| ... |
+| ... | - **[Ver] TG verification:** ESP packet is sent from TG to DUT1. ESP \
+| ... | packet is received on TG from DUT1.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -64,9 +67,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in tunnel\
-| | ... | mode.
+| | ... | - **[Cfg]** On DUT1 configure IPsec manual keyed connection with \
+| | ... | encryption algorithm AES_128_CBC and integrity algorithm \
+| | ... | HMAC_SHA_512 in tunnel mode.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tptsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tptsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot
index 234afe5..84aaa7c 100644 (file)
--- a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tptsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot
+++ b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tptsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot
@@ -26,16 +26,19 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 IPsec transport mode test suite.*
-|
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
+| Documentation | **IPv4 IPsec transport mode test suite.**
+| ... |
+| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\
-| ... | loopback an physical interface IPv4 addresses, static ARP record, route\
-| ... | and IPsec manual keyed connection in transport mode.
-| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet\
-| ... | is received on TG from DUT1.
-| ... | *[Ref] Applicable standard specifications:* RFC4303.
+| ... |
+| ... | - **[Cfg] DUT configuration:** On DUT1 create loopback interface, \
+| ... | configure loopback an physical interface IPv4 addresses, static ARP \
+| ... | record, route and IPsec manual keyed connection in transport mode.
+| ... |
+| ... | - **[Ver] TG verification:** ESP packet is sent from TG to DUT1. ESP \
+| ... | packet is received on TG from DUT1.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -64,9 +67,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in\
-| | ... | transport mode.
+| | ... | - **[Cfg]** On DUT1 configure IPsec manual keyed connection with \
+| | ... | encryption algorithm AES_128_CBC and integrity algorithm \
+| | ... | HMAC_SHA_512 in transport mode.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tnlsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tnlsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot
index c8e7199..80f557a 100644 (file)
--- a/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tnlsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot
+++ b/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tnlsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot
@@ -26,16 +26,19 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv6 IPsec tunnel mode test suite.*
-|
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
+| Documentation | **IPv6 IPsec tunnel mode test suite.**
+| ... |
+| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure
-| ... | loopback an physical interface IPv6 addresses, static ARP record, route
-| ... | and IPsec manual keyed connection in tunnel mode.
-| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet
-| ... | is received on TG from DUT1.
-| ... | *[Ref] Applicable standard specifications:* RFC4303.
+| ... |
+| ... | - **[Cfg] DUT configuration:** On DUT1 create loopback interface, \
+| ... | configure loopback an physical interface IPv6 addresses, static ARP \
+| ... | record, route and IPsec manual keyed connection in tunnel mode.
+| ... |
+| ... | - **[Ver] TG verification:** ESP packet is sent from TG to DUT1. ESP \
+| ... | packet is received on TG from DUT1.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +68,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in tunnel\
-| | ... | mode.
+| | ... | - **[Cfg]** On DUT1 configure IPsec manual keyed connection with \
+| | ... | encryption algorithm AES_128_CBC and integrity algorithm \
+| | ... | HMAC_SHA_512 in tunnel mode.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tptsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tptsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot
index 35fb82e..e195212 100644 (file)
--- a/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tptsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot
+++ b/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tptsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot
@@ -26,16 +26,19 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv6 IPsec transport mode test suite.*
-|
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
+| Documentation | **IPv6 IPsec transport mode test suite.**
+| ... |
+| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure
-| ... | loopback an physical interface IPv6 addresses, static ARP record, route
-| ... | and IPsec manual keyed connection in transport mode.
-| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet
-| ... | is received on TG from DUT1.
-| ... | *[Ref] Applicable standard specifications:* RFC4303.
+| ... |
+| ... | - **[Cfg] DUT configuration:** On DUT1 create loopback interface, \
+| ... | configure loopback an physical interface IPv6 addresses, static ARP \
+| ... | record, route and IPsec manual keyed connection in transport mode.
+| ... |
+| ... | - **[Ver] TG verification:** ESP packet is sent from TG to DUT1. ESP \
+| ... | packet is received on TG from DUT1.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +68,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in\
-| | ... | transport mode.
+| | ... | - **[Cfg]** On DUT1 configure IPsec manual keyed connection with \
+| | ... | encryption algorithm AES_128_CBC and integrity algorithm \
+| | ... | HMAC_SHA_512 in transport mode.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-gtpu-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-gtpu-scapy.robot
index 0b8e44a..090bcef 100644 (file)
--- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-gtpu-scapy.robot
+++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-gtpu-scapy.robot
@@ -25,13 +25,17 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IP4_GTPU flow test cases*
+| Documentation | **IP4_GTPU flow test cases**
 | ...
-| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IP4-GTPU.
-| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_GTPU flow.
-| ... | *[Ver] TG verification:* Verify if the flow action is correct.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IP4-GTPU.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT is configured with IP4_GTPU flow.
+| ... |
+| ... | - **[Ver] TG verification:** Verify if the flow action is correct.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -53,8 +57,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IP4-GTPU packet routed over DUT1 interfaces.\
-| | ... | Make VPP verify flow packet is correct.
+| | ... | - **[Ver]** Make TG send IP4-GTPU packet routed over DUT1 \
+| | ... | interfaces. Make VPP verify flow packet is correct.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-ah-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-ah-scapy.robot
index 64829d9..fd65ce4 100644 (file)
--- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-ah-scapy.robot
+++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-ah-scapy.robot
@@ -25,13 +25,17 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IP4_IPSEC flow test cases*
+| Documentation | **IP4_IPSEC flow test cases**
 | ...
-| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IP4-AH.
-| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_IPSEC flow.
-| ... | *[Ver] TG verification:* Verify if the flow action is correct.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IP4-AH.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT is configured with IP4_IPSEC flow.
+| ... |
+| ... | - **[Ver] TG verification:** Verify if the flow action is correct.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -53,8 +57,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IP4-IPSEC packet routed over DUT1 interfaces.\
-| | ... | Make VPP verify flow packet is correct.
+| | ... | - **[Ver]** Make TG send IP4-IPSEC packet routed over DUT1 \
+| | ... | interfaces. Make VPP verify flow packet is correct.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-esp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-esp-scapy.robot
index e1c93bf..3c6d10e 100644 (file)
--- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-esp-scapy.robot
+++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-esp-scapy.robot
@@ -25,13 +25,17 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IP4_IPSEC flow test cases*
+| Documentation | **IP4_IPSEC flow test cases**
 | ...
-| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IP4-ESP.
-| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_IPSEC flow.
-| ... | *[Ver] TG verification:* Verify if the flow action is correct.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IP4-ESP.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT is configured with IP4_IPSEC flow.
+| ... |
+| ... | - **[Ver] TG verification:** Verify if the flow action is correct.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -53,8 +57,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IP4-IPSEC packet routed over DUT1 interfaces.\
-| | ... | Make VPP verify flow packet is correct.
+| | ... | - **[Ver]** Make TG send IP4-IPSEC packet routed over DUT1 \
+| | ... | interfaces. Make VPP verify flow packet is correct.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-l2tpv3oip-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-l2tpv3oip-scapy.robot
index c10af0c..1c9a85d 100644 (file)
--- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-l2tpv3oip-scapy.robot
+++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-l2tpv3oip-scapy.robot
@@ -25,13 +25,18 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IP4_L2TPV3OIP flow test cases*
+| Documentation | **IP4_L2TPV3OIP flow test cases**
 | ...
-| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IP4-L2TPV3.
-| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_L2TPV3OIP flow.
-| ... | *[Ver] TG verification:* Verify if the flow action is correct.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IP4-L2TPV3.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT is configured with IP4_L2TPV3OIP \
+| ... | flow.
+| ... |
+| ... | - **[Ver] TG verification:** Verify if the flow action is correct.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -53,8 +58,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IP4-L2TPV3OIP packet routed over DUT1 interfaces.\
-| | ... | Make VPP verify flow packet is correct.
+| | ... | - **[Ver]** Make TG send IP4-L2TPV3OIP packet routed over DUT1 \
+| | ... | interfaces. Make VPP verify flow packet is correct.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-tcp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-tcp-scapy.robot
index 6aee4a8..498b01b 100644 (file)
--- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-tcp-scapy.robot
+++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-tcp-scapy.robot
@@ -25,13 +25,17 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IP4_N_TUPLE flow test cases*
+| Documentation | **IP4_N_TUPLE flow test cases**
 | ...
-| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IP4-TCP.
-| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_N_TUPLE flow.
-| ... | *[Ver] TG verification:* Verify if the flow action is correct.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IP4-TCP.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT is configured with IP4_N_TUPLE flow.
+| ... |
+| ... | - **[Ver] TG verification:** Verify if the flow action is correct.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -54,7 +58,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IP4 packet routed over DUT1 interfaces.\
+| | ... | - **[Ver]** Make TG send IP4 packet routed over DUT1 interfaces. \
 | | ... | Make VPP verify flow packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-udp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-udp-scapy.robot
index f9e7476..f3c867e 100644 (file)
--- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-udp-scapy.robot
+++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-udp-scapy.robot
@@ -25,13 +25,17 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IP4_N_TUPLE flow test cases*
+| Documentation | **IP4_N_TUPLE flow test cases**
 | ...
-| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IP4-UDP.
-| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_N_TUPLE flow.
-| ... | *[Ver] TG verification:* Verify if the flow action is correct.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IP4-UDP.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT is configured with IP4_N_TUPLE flow.
+| ... |
+| ... | - **[Ver] TG verification:** Verify if the flow action is correct.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -54,7 +58,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IP4 packet routed over DUT1 interfaces.\
+| | ... | - **[Ver]** Make TG send IP4 packet routed over DUT1 interfaces. \
 | | ... | Make VPP verify flow packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-tcp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-tcp-scapy.robot
index b5d3548..f4ea410 100644 (file)
--- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-tcp-scapy.robot
+++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-tcp-scapy.robot
@@ -25,13 +25,17 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IP4 flow test cases*
+| Documentation | **IP4 flow test cases**
 | ...
-| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IP4-TCP.
-| ... | *[Cfg] DUT configuration:* DUT is configured with IP4 flow.
-| ... | *[Ver] TG verification:* Verify if the flow action is correct.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IP4-TCP.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT is configured with IP4 flow.
+| ... |
+| ... | - **[Ver] TG verification:** Verify if the flow action is correct.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -52,7 +56,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IP4 packet routed over DUT1 interfaces.\
+| | ... | - **[Ver]** Make TG send IP4 packet routed over DUT1 interfaces. \
 | | ... | Make VPP verify flow packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-udp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-udp-scapy.robot
index 47f625c..e263b56 100644 (file)
--- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-udp-scapy.robot
+++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-udp-scapy.robot
@@ -25,13 +25,17 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IP4 flow test cases*
+| Documentation | **IP4 flow test cases**
 | ...
-| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IP4-UDP.
-| ... | *[Cfg] DUT configuration:* DUT is configured with IP4 flow.
-| ... | *[Ver] TG verification:* Verify if the flow action is correct.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IP4-UDP.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT is configured with IP4 flow.
+| ... |
+| ... | - **[Ver] TG verification:** Verify if the flow action is correct.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -52,7 +56,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IP4 packet routed over DUT1 interfaces.\
+| | ... | - **[Ver]** Make TG send IP4 packet routed over DUT1 interfaces. \
 | | ... | Make VPP verify flow packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-tcp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-tcp-scapy.robot
index 4c4e862..a4545ef 100644 (file)
--- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-tcp-scapy.robot
+++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-tcp-scapy.robot
@@ -25,13 +25,17 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IP6_N_TUPLE flow test cases*
+| Documentation | **IP6_N_TUPLE flow test cases**
 | ...
-| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IP6-TCP.
-| ... | *[Cfg] DUT configuration:* DUT is configured with IP6_N_TUPLE flow.
-| ... | *[Ver] TG verification:* Verify if the flow action is correct.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IP6-TCP.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT is configured with IP6_N_TUPLE flow.
+| ... |
+| ... | - **[Ver] TG verification:** Verify if the flow action is correct.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -54,7 +58,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IP6 packet routed over DUT1 interfaces.\
+| | ... | - **[Ver]** Make TG send IP6 packet routed over DUT1 interfaces. \
 | | ... | Make VPP verify flow packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-udp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-udp-scapy.robot
index 8f27b4c..6071e65 100644 (file)
--- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-udp-scapy.robot
+++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-udp-scapy.robot
@@ -25,13 +25,17 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IP6_N_TUPLE flow test cases*
+| Documentation | **IP6_N_TUPLE flow test cases**
 | ...
-| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IP6-UDP.
-| ... | *[Cfg] DUT configuration:* DUT is configured with IP6_N_TUPLE flow.
-| ... | *[Ver] TG verification:* Verify if the flow action is correct.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IP6-UDP.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT is configured with IP6_N_TUPLE flow.
+| ... |
+| ... | - **[Ver] TG verification:** Verify if the flow action is correct.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -54,7 +58,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IP6 packet routed over DUT1 interfaces.\
+| | ... | - **[Ver]** Make TG send IP6 packet routed over DUT1 interfaces. \
 | | ... | Make VPP verify flow packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-tcp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-tcp-scapy.robot
index 9e50a27..8a7e3a4 100644 (file)
--- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-tcp-scapy.robot
+++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-tcp-scapy.robot
@@ -25,13 +25,17 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IP6 flow test cases*
+| Documentation | **IP6 flow test cases**
 | ...
-| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IP6-TCP.
-| ... | *[Cfg] DUT configuration:* DUT is configured with IP6 flow.
-| ... | *[Ver] TG verification:* Verify if the flow action is correct.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IP6-TCP.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT is configured with IP6 flow.
+| ... |
+| ... | - **[Ver] TG verification:** Verify if the flow action is correct.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -52,7 +56,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IP6 packet routed over DUT1 interfaces.\
+| | ... | - **[Ver]** Make TG send IP6 packet routed over DUT1 interfaces. \
 | | ... | Make VPP verify flow packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-udp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-udp-scapy.robot
index 996a631..0f019c7 100644 (file)
--- a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-udp-scapy.robot
+++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-udp-scapy.robot
@@ -25,13 +25,17 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IP6 flow test cases*
+| Documentation | **IP6 flow test cases**
 | ...
-| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IP6-UDP.
-| ... | *[Cfg] DUT configuration:* DUT is configured with IP6 flow.
-| ... | *[Ver] TG verification:* Verify if the flow action is correct.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IP6-UDP.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT is configured with IP6 flow.
+| ... |
+| ... | - **[Ver] TG verification:** Verify if the flow action is correct.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -52,7 +56,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IP6 packet routed over DUT1 interfaces.\
+| | ... | - **[Ver]** Make TG send IP6 packet routed over DUT1 interfaces. \
 | | ... | Make VPP verify flow packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-namespace-scapy.robot b/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-namespace-scapy.robot
index df18b3d..b622470 100644 (file)
--- a/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-namespace-scapy.robot
+++ b/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-namespace-scapy.robot
@@ -26,19 +26,24 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Tap Interface Traffic Tests*
-| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links
+| Documentation | **Tap Interface Traffic Tests**
+| ... |
+| ... | - **[Top] Network Topologies:** TG=DUT1 2-node topology with two links \
 | ... | between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-ICMPv4 for L2 switching of \
 | ... | IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
-| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG)
-| ... | are set depending on test case; Namespaces (NM)
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) \
+| ... | are set depending on test case; Namespaces (NM) \
 | ... | are set on DUT1 with attached linux-TAP.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets
-| ... | are sent by TG on link to DUT1; On receipt TG verifies packets
+| ... |
+| ... | - **[Ver] TG verification:** Test ICMPv4 Echo Request packets \
+| ... | are sent by TG on link to DUT1; On receipt TG verifies packets \
 | ... | for correctness and their IPv4 src-addr, dst-addr, and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -63,11 +68,11 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] On DUT1 configure two interface addresses with IPv4 of which\
-| | ... | one is TAP interface (dut_to_tg_if and TAP) and one is linux-TAP in\
-| | ... | namespace.
-| | ... | [Ver] Packet sent from TG gets to the destination and ICMP-reply is\
-| | ... | received on TG.
+| | ... | - **[Cfg]** On DUT1 configure two interface addresses with IPv4 of \
+| | ... | which one is TAP interface (dut_to_tg_if and TAP) and one is \
+| | ... | linux-TAP in namespace.
+| | ... | - **[Ver]** Packet sent from TG gets to the destination and \
+| | ... | ICMP-reply is received on TG.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-scapy.robot b/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-scapy.robot
index e23855a..64ecb55 100644 (file)
--- a/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-scapy.robot
+++ b/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-scapy.robot
@@ -25,19 +25,24 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Tap Interface Traffic Tests*
-| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links
+| Documentation | **Tap Interface Traffic Tests**
+| ... |
+| ... | - **[Top] Network Topologies:** TG=DUT1 2-node topology with two links \
 | ... | between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-ICMPv4 for L2 switching of \
 | ... | IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
-| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG)
-| ... | are set depending on test case; Namespaces (NM)
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) \
+| ... | are set depending on test case; Namespaces (NM) \
 | ... | are set on DUT1 with attached linux-TAP.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets
-| ... | are sent by TG on link to DUT1; On receipt TG verifies packets
+| ... |
+| ... | - **[Ver] TG verification:** Test ICMPv4 Echo Request packets \
+| ... | are sent by TG on link to DUT1; On receipt TG verifies packets \
 | ... | for correctness and their IPv4 src-addr, dst-addr, and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -62,10 +67,11 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] On DUT1 configure two interface addresses with IPv4 of which\
-| | ... | one is TAP interface (dut_to_tg_if and TAP) and one is linux-TAP.
-| | ... | [Ver] Packet sent from TG gets to the destination and ICMP-reply is\
-| | ... | received on TG.
+| | ... | - **[Cfg]** On DUT1 configure two interface addresses with IPv4 of \
+| | ... |  which one is TAP interface (dut_to_tg_if and TAP) and one is \
+| | ... | linux-TAP.
+| | ... | - **[Ver]** Packet sent from TG gets to the destination and \
+| | ... | ICMP-reply is received on TG.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2tap-scapy.robot b/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2tap-scapy.robot
index 8a00466..f6e8e89 100644 (file)
--- a/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2tap-scapy.robot
+++ b/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2tap-scapy.robot
@@ -26,20 +26,24 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Tap Interface Traffic Tests*
-|
-| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links
+| Documentation | **Tap Interface Traffic Tests**
+| ... |
+| ... | - **[Top] Network Topologies:** TG=DUT1 2-node topology with two links \
 | ... | between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of \
 | ... | IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
-| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG)
-| ... | are set depending on test case; Namespaces (NM)
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) \
+| ... | are set depending on test case; Namespaces (NM) \
 | ... | are set on DUT1 with attached linux-TAP.
-| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61
-| ... | are sent by TG on link to DUT1; On receipt TG verifies packets
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 \
+| ... | are sent by TG on link to DUT1; On receipt TG verifies packets \
 | ... | for correctness and their IPv4 src-addr, dst-addr, and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -58,8 +62,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Packet sent from TG is passed through all L2BD and received\
-| | ... | back on TG. Then src_ip, dst_ip and MAC are checked.
+| | ... | - **[Ver]** Packet sent from TG is passed through all L2BD and \
+| | ... | received back on TG. Then src_ip, dst_ip and MAC are checked.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-scapy.robot
index 7121cdb..cc353c7 100644 (file)
--- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-scapy.robot
+++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-scapy.robot
@@ -25,18 +25,22 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *ADL Security IPv4 allowlist test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
+| Documentation | **ADL Security IPv4 allowlist test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
-| ... | static routes. ADL security allowlist are applied on DUT1 ingress \
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and static routes. ADL security allowlist are applied on DUT1 ingress \
 | ... | interface from TG.
-| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \
-| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \
-| ... | and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packets are sent in one \
+| ... | direction by TG on link to DUT1; on receive TG verifies packets for \
+| ... | correctness and drops as applicable.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so
@@ -54,7 +58,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IPv4 on its interface to DUT1; \
+| | ... | - **[Ver]** Make TG send IPv4 on its interface to DUT1; \
 | | ... | verify received IPv4 pkts are correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlblklistbase-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlblklistbase-scapy.robot
index bbfc156..d66686e 100644 (file)
--- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlblklistbase-scapy.robot
+++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlblklistbase-scapy.robot
@@ -25,18 +25,22 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *ADL Security IPv4 allowlist test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
+| Documentation | **ADL Security IPv4 allowlist test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
-| ... | static routes. ADL security allowlist are applied on DUT1 ingress \
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and static routes. ADL security allowlist are applied on DUT1 ingress \
 | ... | interface from TG.
-| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \
-| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \
-| ... | and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packets are sent in one \
+| ... | direction by TG on link to DUT1; on receive TG verifies packets for \
+| ... | correctness and drops as applicable.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so
@@ -54,7 +58,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IPv4 on its interface to DUT1; \
+| | ... | - **[Ver]** Make TG send IPv4 on its interface to DUT1; \
 | | ... | verify received IPv4 pkts are correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-scapy.robot
index 18a1527..34e0fa6 100644 (file)
--- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-scapy.robot
+++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-scapy.robot
@@ -25,18 +25,22 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 iAcl whitelist test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **IPv4 iAcl whitelist test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
-| ... | static routes. IPv4 iAcl security whitelist is applied on DUT1 ingress \
-| ... | interface from TG.
-| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \
-| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \
-| ... | and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and static routes. IPv4 iAcl security whitelist is applied on DUT1 \
+| ... | ingress interface from TG.
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packets are sent in one \
+| ... | direction by TG on link to DUT1; on receive TG verifies packets for \
+| ... | correctness and drops as applicable.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -54,7 +58,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IPv4 on its interface to DUT1; \
+| | ... | - **[Ver]** Make TG send IPv4 on its interface to DUT1; \
 | | ... | verify received IPv4 pkts are correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-scapy.robot
index a12c180..aa85994 100644 (file)
--- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-scapy.robot
+++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-scapy.robot
@@ -25,17 +25,22 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 policer test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **IPv4 policer test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links.
-| ... | *[Cfg] DUT configuration:* On DUT1 configure interfaces IPv4 adresses, \
-| ... | and static ARP record on the second interface. On DUT1 configure 2R3C \
-| ... | color-aware policer on the first interface.
-| ... | *[Ver] TG verification:* Test packet is sent from TG on the first link \
-| ... | to DUT1. Packet is received on TG on the second link from DUT1.
-| ... | *[Ref] Applicable standard specifications:* RFC2474, RFC2697, RFC2698.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links.
+| ... |
+| ... | - **[Cfg] DUT configuration:** On DUT1 configure interfaces IPv4 \
+| ... | addresses and static ARP record on the second interface. On DUT1 \
+| ... | configure 2R3C color-aware policer on the first interface.
+| ... |
+| ... | - **[Ver] TG verification:** Test packet is sent from TG on the first \
+| ... | link to DUT1. Packet is received on TG on the second link from DUT1.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2474, RFC2697, \
+| ... | RFC2698.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -56,7 +61,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Test packet is sent from TG on the first link to DUT1. \
+| | ... | - **[Ver]** Test packet is sent from TG on the first link to DUT1. \
 | | ... | Packet is received on TG on the second link from DUT1.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-scapy.robot
index e76d2af..26aa8c3 100644 (file)
--- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-scapy.robot
+++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-scapy.robot
@@ -25,18 +25,24 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 routing test cases*
+| Documentation | **IPv4 routing test cases**
 | ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing on both \
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing on both \
 | ... | links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
-| ... | two static IPv4 /24 route entries.
-| ... | *[Ver] TG verification:* Test IPv4 packet with IP protocol=61 is sent \
-| ... | in one direction by TG on links to DUT1; on receive TG verifies packet \
-| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and two static IPv4 /24 route entries.
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packet with IP protocol=61 is \
+| ... | sent in one direction by TG on links to DUT1; on receive TG verifies \
+| ... | packet for correctness and their IPv4 src-addr, dst-addr and MAC \
+| ... | addresses.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC791, RFC826, RFC792
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -54,7 +60,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IPv4 packet routed over DUT1 interfaces.\
+| | ... | - **[Ver]** Make TG send IPv4 packet routed over DUT1 interfaces. \
 | | ... | Make TG verify IPv4 packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44det-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44det-scapy.robot
index b051ac1..808ecc4 100644 (file)
--- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44det-scapy.robot
+++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44det-scapy.robot
@@ -28,20 +28,24 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *NAT44 deterministic mode test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **NAT44 deterministic mode test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and
-| ... | one static IPv4 /${dest_mask} route entries.
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* Eth-IPv4-TCP packet is sent from TG to DUT1 in\
-| ... | one direction. Packet is received and verified for correctness on TG.\
-| ... | Then Eth-IPv4-TCP packet is sent from TG in opposite direction. Packet\
-| ... | is received and verified for correctness on TG.
-| ... | *[Ref] Applicable standard specifications:* RFC791, RFC793, RFC3022,
-| ... | RFC4787.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /${dest_mask} route entries. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** Eth-IPv4-TCP packet is sent from TG to \
+| ... | DUT1 in one direction. Packet is received and verified for correctness \
+| ... | on TG. Then Eth-IPv4-TCP packet is sent from TG in opposite direction. \
+| ... | Packet is received and verified for correctness on TG.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC791, RFC793, \
+| ... | RFC3022 and RFC4787.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | det44_plugin.so
@@ -81,8 +85,8 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
-| | ... | [Ver] Make TG send IPv4 packet routed over DUT1 interfaces.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Ver]** Make TG send IPv4 packet routed over DUT1 interfaces. \
 | | ... | Make TG verify IPv4 packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-scapy.robot
index 67459e6..de4df2b 100644 (file)
--- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-scapy.robot
+++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-scapy.robot
@@ -17,8 +17,8 @@
 | Resource | resources/libraries/robot/shared/traffic.robot
 |
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | NAT44_ENDPOINT_DEPENDENT
-| ... | BASE | TCP | DRV_VFIO_PCI
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44
+| ... | NAT44_ENDPOINT_DEPENDENT | BASE | TCP | DRV_VFIO_PCI
 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
 | ... | ethip4tcp-nat44ed
 |
@@ -28,21 +28,25 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Connections per second NAT44 endpoint-dependent mode
-| ... | performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **Connections per second NAT44 endpoint-dependent mode
+| ... | performance test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and
-| ... | one static IPv4 /18 route entries.
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* Eth-IPv4-TCP packet is sent from TG to DUT1 in\
-| ... | one direction. Packet is received and verified for correctness on TG.\
-| ... | Then Eth-IPv4-TCP packet is sent from TG in opposite direction. Packet\
-| ... | is received and verified for correctness on TG.
-| ... | *[Ref] Applicable standard specifications:* RFC791, RFC793, RFC3022,
-| ... | RFC4787.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /18 route entries. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** Eth-IPv4-TCP packet is sent from TG to \
+| ... | DUT1 in one direction. Packet is received and verified for correctness \
+| ... | on TG. Then Eth-IPv4-TCP packet is sent from TG in opposite direction. \
+| ... | Packet is received and verified for correctness on TG.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC791, RFC793, \
+| ... | RFC3022 and RFC4787.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -84,8 +88,8 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
-| | ... | [Ver] Make TG send IPv4 packet routed over DUT1 interfaces.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Ver]** Make TG send IPv4 packet routed over DUT1 interfaces. \
 | | ... | Make TG verify IPv4 packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-scapy.robot
index a641e5f..8770ce3 100644 (file)
--- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-scapy.robot
+++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-scapy.robot
@@ -28,20 +28,24 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *NAT44 deterministic mode test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **NAT44 deterministic mode test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and
-| ... | one static IPv4 /${dest_mask} route entries.
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* Eth-IPv4-UDP packet is sent from TG to DUT1 in\
-| ... | one direction. Packet is received and verified for correctness on TG.\
-| ... | Then Eth-IPv4-UDP packet is sent from TG in opposite direction. Packet\
-| ... | is received and verified for correctness on TG.
-| ... | *[Ref] Applicable standard specifications:* RFC791, RFC768, RFC3022,
-| ... | RFC4787.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /${dest_mask} route entries. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** Eth-IPv4-UDP packet is sent from TG to \
+| ... | DUT1 in one direction. Packet is received and verified for correctness \
+| ... | on TG. Then Eth-IPv4-UDP packet is sent from TG in opposite direction. \
+| ... | Packet is received and verified for correctness on TG.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC791, RFC768, \
+| ... | RFC3022 and RFC4787.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | det44_plugin.so
@@ -81,8 +85,8 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
-| | ... | [Ver] Make TG send IPv4 packet routed over DUT1 interfaces.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Ver]** Make TG send IPv4 packet routed over DUT1 interfaces. \
 | | ... | Make TG verify IPv4 packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-scapy.robot
index d11fa23..a2efcf5 100644 (file)
--- a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-scapy.robot
+++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-scapy.robot
@@ -17,8 +17,8 @@
 | Resource | resources/libraries/robot/shared/traffic.robot
 |
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | NAT44_ENDPOINT_DEPENDENT
-| ... | BASE | UDP | DRV_VFIO_PCI
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44
+| ... | NAT44_ENDPOINT_DEPENDENT | BASE | UDP | DRV_VFIO_PCI
 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
 | ... | ethip4udp-nat44ed
 |
@@ -28,21 +28,25 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput NAT44 endpoint-dependent mode
-| ... | performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput NAT44 endpoint-dependent mode
+| ... | performance test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and
-| ... | one static IPv4 /${dest_mask} route entries.
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* Eth-IPv4-UDP packet is sent from TG to DUT1 in\
-| ... | one direction. Packet is received and verified for correctness on TG.\
-| ... | Then Eth-IPv4-UDP packet is sent from TG in opposite direction. Packet\
-| ... | is received and verified for correctness on TG.
-| ... | *[Ref] Applicable standard specifications:* RFC791, RFC768, RFC3022,
-| ... | RFC4787.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /${dest_mask} route entries. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** Eth-IPv4-UDP packet is sent from TG to \
+| ... | DUT1 in one direction. Packet is received and verified for correctness \
+| ... | on TG. Then Eth-IPv4-UDP packet is sent from TG in opposite direction. \
+| ... | Packet is received and verified for correctness on TG.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC791, RFC768, \
+| ... | RFC3022 and RFC4787.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -84,8 +88,8 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
-| | ... | [Ver] Make TG send IPv4 packet routed over DUT1 interfaces.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Ver]** Make TG send IPv4 packet routed over DUT1 interfaces. \
 | | ... | Make TG verify IPv4 packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-scapy.robot b/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-scapy.robot
index 157040a..c601f31 100644 (file)
--- a/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-scapy.robot
+++ b/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-scapy.robot
@@ -28,24 +28,28 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *L2BD with GENEVE L3 mode test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **L2BD with GENEVE L3 mode test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\
-| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\
-| ... | routing over GENEVE tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\
-| ... | GENEVE tunnel and 4 static IPv4 /24 route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \
+| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \
+| ... | for IPv4 routing over GENEVE tunnel.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | over GENEVE tunnel and 4 static IPv4 /24 route entries. \
 | ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* Test Eth-IPv4 packet is sent by TG-if1 on link\
-| ... | to DUT1-if1; on receive by TG-if2 the encapsulated packet is verified\
-| ... | for correctness and its outer and inner IPv4 and MAC addresses, UDP\
-| ... | ports and GENEVE vni and protocol number. Then test\
-| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 packet is sent by TG-if2 on link to\
-| ... | DUT1-if2; on receive by TG-if1 decapsulated packet is verified for\
+| ... |
+| ... | - **[Ver] TG verification:** Test Eth-IPv4 packet is sent by TG-if1 on \
+| ... | link to DUT1-if1; on receive by TG-if2 the encapsulated packet is \
+| ... | verified for correctness and its outer and inner IPv4 and MAC \
+| ... | addresses, UDP ports and GENEVE vni and protocol number. Then test. \
+| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 packet is sent by TG-if2 on link to \
+| ... | DUT1-if2; on receive by TG-if1 decapsulated packet is verified for \
 | ... | correctness and its IPv4 and MAC addresses
-| ... | *[Ref] Applicable standard specifications:* RFC791, RFC768, RFC8926.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC791, RFC768, RFC8926.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so
@@ -75,9 +79,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration.
+| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-scapy.robot b/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-scapy.robot
index c79d7f1..aa0ed30 100644 (file)
--- a/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-scapy.robot
+++ b/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-scapy.robot
@@ -26,19 +26,23 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *L2BD with VXLANoIPv4 test cases*
-|
-| ... | *[Top] Network topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **L2BD with VXLANoIPv4 test cases**
+| ... |
+| ... | - **[Top] Network topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on\
+| ... |
+| ... | - **[Enc] Packet encapsulations:** Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \
 | ... | TG-DUT.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\
-| ... | switching combined with MAC learning enable.\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \
+| ... | cross-connect switching.combined with MAC learning enable. \
 | ... | VXLAN tunnels are configured on links betwen TG and DUT.
-| ... | *[Ver] TG verification:* Test Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 packet is\
-| ... | sent by TG on link to DUT1; on receive TG verifies packets for\
-| ... | correctness and their IPv4 src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC7348.
+| ... |
+| ... | - **[Ver] TG verification:** Test Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 \
+| ... | packet is sent by TG on link to DUT1; on receive TG verifies packets \
+| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -56,7 +60,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send VXLAN encapsulated Ethernet frame; verify\
+| | ... | - **[Ver]** Make TG send VXLAN encapsulated Ethernet frame; verify \
 | | ... | all packets are received.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2xcbase-scapy.robot b/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2xcbase-scapy.robot
index 93cedb6..dcf48e8 100644 (file)
--- a/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2xcbase-scapy.robot
+++ b/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2xcbase-scapy.robot
@@ -26,18 +26,22 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *L2XC with VXLANoIPv4 test cases*
-|
-| ... | *[Top] Network topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **L2XC with VXLANoIPv4 test cases**
+| ... |
+| ... | - **[Top] Network topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on\
+| ... |
+| ... | - **[Enc] Packet encapsulations:** Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \
 | ... | TG-DUT.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect.\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \
 | ... | VXLAN tunnels are configured on links betwen TG and DUT.
-| ... | *[Ver] TG verification:* Test Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 packet is\
-| ... | sent by TG on link to DUT1; on receive TG verifies packets for\
-| ... | correctness and their IPv4 src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC7348.
+| ... |
+| ... | - **[Ver] TG verification:** Test Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 \
+| ... | packet is sent by TG on link to DUT1; on receive TG verifies packets \
+| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -55,7 +59,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send VXLAN encapsulated Ethernet frame; verify\
+| | ... | - **[Ver]** Make TG send VXLAN encapsulated Ethernet frame; verify \
 | | ... | all packets are received.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lisp-ip4base-scapy.robot b/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lisp-ip4base-scapy.robot
index 35343ed..efaab06 100644 (file)
--- a/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lisp-ip4base-scapy.robot
+++ b/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lisp-ip4base-scapy.robot
@@ -27,21 +27,25 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *ip4-lisp-ip4 encapsulation test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node\
-| ... | circular topology with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4\
-| ... | on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing\
+| Documentation | **ip4-lisp-ip4 encapsulation test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node \
+| ... | circular with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv4-ICMPv4 \
+| ... | on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing \
 | ... | over LISPoIPv4 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT is configured with IPv4\
-| ... | routing and static routes. LISPoIPv4 tunnel is\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT is configured with IPv4. \
+| ... | routing and static routes. LISPoIPv4 tunnel is \
 | ... | configured between DUT1 and TG2.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\
-| ... | are sent by TG on if1 link to DUT1; on receive TG verifies\
-| ... | packets for correctness and their IPv4 src-addr, dst-addr\
+| ... |
+| ... | - **[Ver] TG verification:** Test ICMPv4 Echo Request packets \
+| ... | are sent by TG on if1 link to DUT1; on receive TG verifies \
+| ... | packets for correctness and their IPv4 src-addr, dst-addr \
 | ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC6830.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
@@ -59,7 +63,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] On DUT1 configure LISP.\
+| | ... | - **[Cfg]** On DUT1 configure LISP.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lispgpe-ip4base-scapy.robot b/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lispgpe-ip4base-scapy.robot
index 6ae9cf4..80d6947 100644 (file)
--- a/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lispgpe-ip4base-scapy.robot
+++ b/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lispgpe-ip4base-scapy.robot
@@ -27,21 +27,25 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *ip4-lispgpe-ip4 encapsulation test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node\
-| ... | circular topology with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPv4-ICMPv4\
-| ... |  on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4\
+| Documentation | **ip4-lispgpe-ip4 encapsulation test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node \
+| ... | circular with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-LISPGPE-IPv4-ICMPv4 \
+| ... |  on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4. \
 | ... |  routing over LISPoIPv4 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\
-| ... | with IPv4 routing and static routes. LISPoIPv4 tunnel is\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and TG(if2) are configured \
+| ... | with IPv4 routing and static routes. LISPoIPv4 tunnel is \
 | ... | configured between DUT1 and TG.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\
-| ... | are sent in TG->DUT(if1); On receive TG(if2) verifies packets\
-| ... | for correctness and their IPv4 src-addr, dst-addr and\
+| ... |
+| ... | - **[Ver] TG verification:** Test ICMPv4 Echo Request packets \
+| ... | are sent in TG->DUT(if1); On receive TG(if2) verifies packets \
+| ... | for correctness and their IPv4 src-addr, dst-addr and \
 | ... | MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC6830.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
@@ -60,7 +64,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] On DUT1 configure LISP.
+| | ... | - **[Cfg]** On DUT1 configure LISP.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lispgpe-ip6base-scapy.robot b/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lispgpe-ip6base-scapy.robot
index 07ad9da..588e00a 100644 (file)
--- a/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lispgpe-ip6base-scapy.robot
+++ b/tests/vpp/device/ip4_tunnels/lisp/2n1l-10ge2p1x710-ethip4lispgpe-ip6base-scapy.robot
@@ -27,21 +27,25 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *ip4-lispgpe-ip6 encapsulation test cases*
-|
-| ... | *[Top] Network Topologies:* TG(if1)-DUT1-TG(if2) 2-node\
-| ... | circular topology with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPv6-ICMPv6\
-| ... | on DUT1-TG(if2),Eth-IPv6-ICMPv6 on TG-DUTn for IPv6\
+| Documentation | **ip4-lispgpe-ip6 encapsulation test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG(if1)-DUT1-TG(if2) 2-node \
+| ... | circular with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-LISPGPE-IPv6-ICMPv6 \
+| ... | on DUT1-TG(if2),Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 \
 | ... | routing over LISPoIPv4 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\
-| ... | with IPv6 routing and static routes. LISPoIPv4 tunnel is\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and TG(if2) are configured \
+| ... | with IPv6 routing and static routes. LISPoIPv4 tunnel is \
 | ... | configured between DUT1 and TG(if2).
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\
-| ... | are sent in if1 by TG on links to DUT1; on receive\
-| ... | TG verifies packets for correctness and their IPv6 src-addr,\
+| ... |
+| ... | - **[Ver] TG verification:** Test ICMPv6 Echo Request packets \
+| ... | are sent in if1 by TG on links to DUT1; on receive \
+| ... | TG verifies packets for correctness and their IPv6 src-addr, \
 | ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC6830.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
@@ -61,7 +65,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] On DUT1 configure LISPGPE\
+| | ... | - **[Cfg]** On DUT1 configure LISPGPE.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-scapy.robot b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-scapy.robot
index 05718e6..56c2e31 100644 (file)
--- a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-scapy.robot
+++ b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-scapy.robot
@@ -25,18 +25,22 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *ADL Security IPv6 allowlist test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
+| Documentation | **ADL Security IPv6 allowlist test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \
-| ... | static routes. ADL security allowlists are applied on DUT1 ingress \
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 on all links.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
+| ... | and static routes. ADL security allowlists are applied on DUT1 ingress \
 | ... | interface from TG.
-| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \
-| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \
-| ... | and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv6 packets are sent in one \
+| ... | direction by TG on link to DUT1; on receive TG verifies packets for \
+| ... | correctness and drops as applicable.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so
@@ -54,7 +58,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IPv6 on its interface to DUT1; \
+| | ... | - **[Ver]** Make TG send IPv6 on its interface to DUT1; \
 | | ... | verify received IPv6 pkts are correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlblklistbase-scapy.robot b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlblklistbase-scapy.robot
index 2ff2a76..a763893 100644 (file)
--- a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlblklistbase-scapy.robot
+++ b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlblklistbase-scapy.robot
@@ -25,18 +25,22 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *ADL Security IPv6 allowlist test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
+| Documentation | **ADL Security IPv6 allowlist test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \
-| ... | static routes. ADL security allowlists are applied on DUT1 ingress \
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 on all links.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
+| ... | and static routes. ADL security allowlists are applied on DUT1 ingress \
 | ... | interface from TG.
-| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \
-| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \
-| ... | and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv6 packets are sent in one \
+| ... | direction by TG on link to DUT1; on receive TG verifies packets for \
+| ... | correctness and drops as applicable.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so
@@ -54,7 +58,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IPv6 on its interface to DUT1; \
+| | ... | - **[Ver]** Make TG send IPv6 on its interface to DUT1; \
 | | ... | verify received IPv6 pkts are correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-scapy.robot b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-scapy.robot
index 273a8fe..67f8ef3 100644 (file)
--- a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-scapy.robot
+++ b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-scapy.robot
@@ -25,18 +25,22 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv6 iAcl whitelist test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **IPv6 iAcl whitelist test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 on all links.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
 | ... | static routes. IPv6 iAcl security whitelist is applied on DUT1 ingress \
 | ... | interface from TG.
-| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \
-| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \
-| ... | and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv6 packets are sent in one \
+| ... | direction by TG on link to DUT1; on receive TG verifies packets for \
+| ... | correctness and drops as applicable.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -54,7 +58,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IPv6 on its interface to DUT1; \
+| | ... | - **[Ver]** Make TG send IPv6 on its interface to DUT1; \
 | | ... | verify received IPv6 pkts are correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ipolicemarkbase-scapy.robot b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ipolicemarkbase-scapy.robot
index 2c9673c..3dfc121 100644 (file)
--- a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ipolicemarkbase-scapy.robot
+++ b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ipolicemarkbase-scapy.robot
@@ -25,17 +25,22 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 policer test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **IPv4 policer test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 on all links.
-| ... | *[Cfg] DUT configuration:* On DUT1 configure interfaces IPv6 adresses, \
-| ... | and static ARP record on the second interface. On DUT1 configure 2R3C \
-| ... | color-aware policer on the first interface.
-| ... | *[Ver] TG verification:* Test packet is sent from TG on the first link \
-| ... | to DUT1. Packet is received on TG on the second link from DUT1.
-| ... | *[Ref] Applicable standard specifications:* RFC2474, RFC2697, RFC2698.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 on all links.
+| ... |
+| ... | - **[Cfg] DUT configuration:** On DUT1 configure interfaces IPv6 \
+| ... | addresses and static ARP record on the second interface. On DUT1 \
+| ... | configure 2R3C color-aware policer on the first interface.
+| ... |
+| ... | - **[Ver] TG verification:** Test packet is sent from TG on the first \
+| ... | link to DUT1. Packet is received on TG on the second link from DUT1.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2474, RFC2697, \
+| ... | RFC2698.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -56,7 +61,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Test packet is sent from TG on the first link to DUT1. \
+| | ... | - **[Ver]** Test packet is sent from TG on the first link to DUT1. \
 | | ... | Packet is received on TG on the second link from DUT1.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-scapy.robot b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-scapy.robot
index 46b9978..c838264 100644 (file)
--- a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-scapy.robot
+++ b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-scapy.robot
@@ -25,18 +25,23 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv6 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
+| Documentation | **IPv6 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing on \
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing on \
 | ... | both links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
 | ... | two static IPv6 /64 route entries.
-| ... | *[Ver] TG verification:* Test IPv6 packet is sent in one direction \
-| ... | by TG on links to DUT1; on receive TG verifies packet for correctness \
-| ... | and their IPv6 src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC2460, RFC4443, RFC4861
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv6 packet is sent in one \
+| ... | direction by TG on links to DUT1; on receive TG verifies packet for \
+| ... | correctness and their IPv6 src-addr, dst-addr and MAC addresses.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2460, RFC4443, \
+| ... |  RFC4861.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -54,7 +59,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IPv6 packet routed over DUT1 interfaces;\
+| | ... | - **[Ver]** Make TG send IPv6 packet routed over DUT1 interfaces. \
 | | ... | Make TG verify IPv6 packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/ip6_tunnels/lisp/2n1l-10ge2p1x710-ethip6lispgpe-ip4base-scapy.robot b/tests/vpp/device/ip6_tunnels/lisp/2n1l-10ge2p1x710-ethip6lispgpe-ip4base-scapy.robot
index 8213d7f..7ca92bd 100644 (file)
--- a/tests/vpp/device/ip6_tunnels/lisp/2n1l-10ge2p1x710-ethip6lispgpe-ip4base-scapy.robot
+++ b/tests/vpp/device/ip6_tunnels/lisp/2n1l-10ge2p1x710-ethip6lispgpe-ip4base-scapy.robot
@@ -27,20 +27,24 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *ip6-lispgpe-ip4 encapsulation test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular\
-| ... | topology with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPv4-ICMPv4\
-| ... |  on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv6 routing\
+| Documentation | **ip6-lispgpe-ip4 encapsulation test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-LISPGPE-IPv4-ICMPv4 \
+| ... |  on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv6 routing \
 | ... |  over LISPoIPv6 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\
-| ... | with IPv6 routing and static routes. LISPoIPv6 tunnel is\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and TG(if2) are configured \
+| ... | with IPv6 routing and static routes. LISPoIPv6 tunnel is \
 | ... | configured between DUT1 and TG.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are\
-| ... | sent in TG->DUT(if1); On receive TG(if2) verifies packets for\
+| ... |
+| ... | - **[Ver] TG verification:** Test ICMPv4 Echo Request packets are \
+| ... | sent in TG->DUT(if1); On receive TG(if2) verifies packets for \
 | ... | correctness and their IPv4 src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC6830.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
@@ -60,7 +64,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] On DUT1 configure LISP.\
+| | ... | - **[Cfg]** On DUT1 configure LISP. \
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/ip6_tunnels/lisp/2n1l-10ge2p1x710-ethip6lispgpe-ip6base-scapy.robot b/tests/vpp/device/ip6_tunnels/lisp/2n1l-10ge2p1x710-ethip6lispgpe-ip6base-scapy.robot
index c80633b..e428a2e 100644 (file)
--- a/tests/vpp/device/ip6_tunnels/lisp/2n1l-10ge2p1x710-ethip6lispgpe-ip6base-scapy.robot
+++ b/tests/vpp/device/ip6_tunnels/lisp/2n1l-10ge2p1x710-ethip6lispgpe-ip6base-scapy.robot
@@ -27,21 +27,25 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *ip6-lispgpe-ip6 encapsulation test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node\
-| ... | circular topology with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPv6-ICMPv6\
-| ... | on DUT1-TG, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing\
+| Documentation | **ip6-lispgpe-ip6 encapsulation test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node \
+| ... | circular with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-LISPGPE-IPv6-ICMPv6 \
+| ... | on DUT1-TG, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing \
 | ... | over LISPoIPv6 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\
-| ... | with IPv6 routing and static routes. LISPoIPv6 tunnel is\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and TG(if2) are configured \
+| ... | with IPv6 routing and static routes. LISPoIPv6 tunnel is \
 | ... | configured between DUT1 and TG.
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\
-| ... | are sent in TG->DUT(if1); On receive TG(if2) verifies\
-| ... | packets for correctness and their IPv6 src-addr,\
+| ... |
+| ... | - **[Ver] TG verification:** Test ICMPv6 Echo Request packets \
+| ... | are sent in TG->DUT(if1); On receive TG(if2) verifies \
+| ... | packets for correctness and their IPv6 src-addr, \
 | ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC6830.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
@@ -60,7 +64,7 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] On DUT1 configure LISP.
+| | ... | - **[Cfg]** On DUT1 configure LISP.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer

diff --git a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sf-scapy.robot b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sf-scapy.robot
index 3cfe804..6aefa63 100644 (file)
--- a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sf-scapy.robot
+++ b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sf-scapy.robot
@@ -26,18 +26,22 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled.Required ACL rules are applied to input\
-| ... | paths of both DUT1 intefaces.\
-| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \
-| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \
-| ... | and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. Required ACL rules are applied to \
+| ... | input paths of both DUT1 intefaces.
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packets are sent in one \
+| ... | direction by TG on link to DUT1; on receive TG verifies packets for \
+| ... | correctness and drops as applicable.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -68,9 +72,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD config with ACLs.
-| | ... | [Ver] Make TG send IPv4 packet in one direction between two\
-| | ... | of its interfaces to be switched by DUT to and from docker.\
+| | ... | - **[Cfg]** DUT runs L2BD config with ACLs.
+| | ... | - **[Ver]** Make TG send IPv4 packet in one direction between two \
+| | ... | of its interfaces to be switched by DUT to and from docker. \
 | | ... | Make TG verify IPv4 packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sl-scapy.robot b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sl-scapy.robot
index 8ca92c5..49690e0 100644 (file)
--- a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sl-scapy.robot
+++ b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sl-scapy.robot
@@ -26,18 +26,22 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled.Required ACL rules are applied to input\
-| ... | paths of both DUT1 intefaces.\
-| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \
-| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \
-| ... | and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled.Required ACL rules are applied to \
+| ... | input paths of both DUT1 intefaces.
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packets are sent in one \
+| ... | direction by TG on link to DUT1; on receive TG verifies packets for \
+| ... | correctness and drops as applicable.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -68,9 +72,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD config with ACLs.
-| | ... | [Ver] Make TG send IPv4 packet in one direction between two\
-| | ... | of its interfaces to be switched by DUT to and from docker.\
+| | ... | - **[Cfg]** DUT runs L2BD config with ACLs.
+| | ... | - **[Ver]** Make TG send IPv4 packet in one direction between two \
+| | ... | of its interfaces to be switched by DUT to and from docker. \
 | | ... | Make TG verify IPv4 packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-macip-iacl1sl-scapy.robot b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-macip-iacl1sl-scapy.robot
index 2546608..fdefa02 100644 (file)
--- a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-macip-iacl1sl-scapy.robot
+++ b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-macip-iacl1sl-scapy.robot
@@ -26,18 +26,22 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled.Required MACIP ACL rules are applied to input\
-| ... | paths of both DUT1 intefaces.\
-| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \
-| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \
-| ... | and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. Required ACL rules are applied to \
+| ... | input paths of both DUT1 intefaces.
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packets are sent in one \
+| ... | direction by TG on link to DUT1; on receive TG verifies packets for \
+| ... | correctness and drops as applicable.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -69,9 +73,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD config with ACLs.
-| | ... | [Ver] Make TG send IPv4 packet in one direction between two\
-| | ... | of its interfaces to be switched by DUT to and from docker.\
+| | ... | - **[Cfg]** DUT runs L2BD config with ACLs.
+| | ... | - **[Ver]** Make TG send IPv4 packet in one direction between two \
+| | ... | of its interfaces to be switched by DUT to and from docker. \
 | | ... | Make TG verify IPv4 packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sf-scapy.robot b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sf-scapy.robot
index 7e71c42..0d93313 100644 (file)
--- a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sf-scapy.robot
+++ b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sf-scapy.robot
@@ -26,18 +26,22 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled.Required ACL rules are applied to input\
-| ... | paths of both DUT1 intefaces.\
-| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \
-| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \
-| ... | and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled.Required ACL rules are applied to \
+| ... | input paths of both DUT1 intefaces.
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packets are sent in one \
+| ... | direction by TG on link to DUT1; on receive TG verifies packets for \
+| ... | correctness and drops as applicable.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -68,9 +72,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD config with ACLs.
-| | ... | [Ver] Make TG send IPv4 packet in one direction between two\
-| | ... | of its interfaces to be switched by DUT to and from docker.\
+| | ... | - **[Cfg]** DUT runs L2BD config with ACLs.
+| | ... | - **[Ver]** Make TG send IPv4 packet in one direction between two \
+| | ... | of its interfaces to be switched by DUT to and from docker. \
 | | ... | Make TG verify IPv4 packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sl-scapy.robot b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sl-scapy.robot
index 6636f17..c3c3301 100644 (file)
--- a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sl-scapy.robot
+++ b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sl-scapy.robot
@@ -26,18 +26,22 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled.Required ACL rules are applied to input\
-| ... | paths of both DUT1 intefaces.\
-| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \
-| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \
-| ... | and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on all links.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled.Required ACL rules are applied to \
+| ... | input paths of both DUT1 intefaces.
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packets are sent in one \
+| ... | direction by TG on link to DUT1; on receive TG verifies packets for \
+| ... | correctness and drops as applicable.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -68,9 +72,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD config with ACLs.
-| | ... | [Ver] Make TG send IPv4 packet in one direction between two\
-| | ... | of its interfaces to be switched by DUT to and from docker.\
+| | ... | - **[Cfg]** DUT runs L2BD config with ACLs.
+| | ... | - **[Ver]** Make TG send IPv4 packet in one direction between two \
+| | ... | of its interfaces to be switched by DUT to and from docker. \
 | | ... | Make TG verify IPv4 packet is correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-scapy.robot b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-scapy.robot
index 5102660..2e058b5 100644 (file)
--- a/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-scapy.robot
+++ b/tests/vpp/device/l2bd/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-scapy.robot
@@ -25,19 +25,23 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *L2 bridge-domain test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
+| Documentation | **L2 bridge-domain test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
 | ... | Both apply to all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain \
-| ... | switching.
-| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 \
-| ... | are sent in both directions by TG on links to DUT1; on receive TG \
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \
+| ... | cross-connect switching.
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 \
+| ... | are sent in both directions by TG on links to DUT1; on receive TG. \
 | ... | verifies packets for correctness and their IPv4 src-addr, \
 | ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC792
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC792
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -55,8 +59,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IPv4 packets in both directions between two\
-| | ... | of its interfaces to be switched by DUT to and from docker; verify\
+| | ... | - **[Ver]** Make TG send IPv4 packets in both directions between two \
+| | ... | of its interfaces to be switched by DUT to and from docker; verify \
 | | ... | all packets are received.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/l2patch/2n1l-10ge2p1x710-ethip4-l2patch-scapy.robot b/tests/vpp/device/l2patch/2n1l-10ge2p1x710-ethip4-l2patch-scapy.robot
index 91310bb..e1bebee 100644 (file)
--- a/tests/vpp/device/l2patch/2n1l-10ge2p1x710-ethip4-l2patch-scapy.robot
+++ b/tests/vpp/device/l2patch/2n1l-10ge2p1x710-ethip4-l2patch-scapy.robot
@@ -25,18 +25,23 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *L2 cross-connect test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
+| Documentation | **L2 cross-connect test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of \
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of \
 | ... | IPv4. Both apply to all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 patch switching.
-| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 \
-| ... | are sent in both directions by TG on links to DUT1; on receive TG \
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 patch \
+| ... | switching.
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 \
+| ... | are sent in both directions by TG on links to DUT1; on receive TG. \
 | ... | verifies packets for correctness and their IPv4 src-addr, \
 | ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC792
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC792
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -54,8 +59,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IPv4 packets in both directions between two\
-| | ... | of its interfaces to be switched by DUT to and from docker; verify\
+| | ... | - **[Ver]** Make TG send IPv4 packets in both directions between two \
+| | ... | of its interfaces to be switched by DUT to and from docker; verify \
 | | ... | all packets are received.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/l2xc/2n1l-10ge2p1x710-ethip4-l2xcbase-scapy.robot b/tests/vpp/device/l2xc/2n1l-10ge2p1x710-ethip4-l2xcbase-scapy.robot
index 5637715..bab7a8b 100644 (file)
--- a/tests/vpp/device/l2xc/2n1l-10ge2p1x710-ethip4-l2xcbase-scapy.robot
+++ b/tests/vpp/device/l2xc/2n1l-10ge2p1x710-ethip4-l2xcbase-scapy.robot
@@ -25,19 +25,23 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *L2 cross-connect test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
+| Documentation | **L2 cross-connect test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
 | ... | Both apply to all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \
-| ... | switching.
-| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 \
-| ... | are sent in both directions by TG on links to DUT1; on receive TG \
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \
+| ... | cross-connect switching.
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 \
+| ... | are sent in both directions by TG on links to DUT1; on receive TG. \
 | ... | verifies packets for correctness and their IPv4 src-addr, \
 | ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC792
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC792
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -55,8 +59,8 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Ver] Make TG send IPv4 packets in both directions between two\
-| | ... | of its interfaces to be switched by DUT to and from docker; verify\
+| | ... | - **[Ver]** Make TG send IPv4 packets in both directions between two \
+| | ... | of its interfaces to be switched by DUT to and from docker; verify \
 | | ... | all packets are received.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy.robot b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy.robot
index bbb3027..433266e 100644 (file)
--- a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy.robot
+++ b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy.robot
@@ -15,8 +15,8 @@
 | Resource | resources/libraries/robot/shared/default.robot
 |
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | SRv6 | SRv6_1SID | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | SRv6 | SRv6_1SID
+| ... | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0
 | ... | ethip6ip6-ip6base-srv6enc1sid
 |
 | Suite Setup | Setup suite topology interfaces | scapy
@@ -25,20 +25,23 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Segment routing over IPv6 dataplane with one SID\
-| ... | (SRH not inserted) test suite.*
-|
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
+| Documentation | **Segment routing over IPv6 dataplane with one SID \
+| ... | (SRH not inserted) test suite.**
+| ... |
+| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6\
-| ... | addresses, static ARP record, route and IPv6 forwarding over SRv6\
+| ... |
+| ... | - **[Cfg] DUT configuration:** On DUT1 configure physical interface \
+| ... | IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 \
 | ... | with one SID - Segment Routing Header not inserted.
-| ... | *[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one\
-| ... | direction. Packet is received and verified for correctness on TG. Then\
-| ... | ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is\
-| ... | received and verified for correctness on TG.
-| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
-| ... | draft 3.
+| ... |
+| ... | - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in \
+| ... | one direction. Packet is received and verified for correctness on TG. \
+| ... | Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet \
+| ... | is received and verified for correctness on TG.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \
+| ... | Programming - draft 3.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -72,10 +75,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 is configured with IPv6 routing and static route,\
-| | ... | SR policy and steering policy for one direction and one SR\
+| | ... | - **[Cfg]** DUT1 is configured with IPv6 routing and static route, \
+| | ... | SR policy and steering policy for one direction and one SR \
 | | ... | behaviour (function) - End.DX6 - for other direction.
-| | ... | [Ver] Make TG send IPv6 packets routed over DUT1 interfaces.\
+| | ... | - **[Ver]** Make TG send IPv6 packets routed over DUT1 interfaces. \
 | | ... | Make TG verify IPv6 packets are correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy.robot b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy.robot
index 6635779..ff17255 100644 (file)
--- a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy.robot
+++ b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy.robot
@@ -26,20 +26,23 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Segment routing over IPv6 dataplane with two SIDs\
-| ... | (SRH inserted) test suite.*
-|
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
+| Documentation | **Segment routing over IPv6 dataplane with two SIDs \
+| ... | (SRH inserted) test suite.**
+| ... |
+| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6\
-| ... | addresses, static ARP record, route and IPv6 forwarding over SRv6\
+| ... |
+| ... | - **[Cfg] DUT configuration:** On DUT1 configure physical interface \
+| ... | IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 \
 | ... | with two SIDs - Segment Routing Header inserted.
-| ... | *[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one\
-| ... | direction. Packet is received and verified for correctness on TG. Then\
-| ... | ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is\
-| ... | received and verified for correctness on TG.
-| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
-| ... | draft 3.
+| ... |
+| ... | - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in \
+| ... | one direction. Packet is received and verified for correctness on TG. \
+| ... | Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet \
+| ... | is received and verified for correctness on TG.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \
+| ... | Programming - draft 3.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -75,10 +78,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 is configured with IPv6 routing and static route,\
-| | ... | SR policy and steering policy for one direction and one SR\
+| | ... | - **[Cfg]** DUT1 is configured with IPv6 routing and static route, \
+| | ... | SR policy and steering policy for one direction and one SR \
 | | ... | behaviour (function) - End - for other direction.
-| | ... | [Ver] Make TG send IPv6 packets routed over DUT1 interfaces.\
+| | ... | - **[Ver]** Make TG send IPv6 packets routed over DUT1 interfaces. \
 | | ... | Make TG verify IPv6 packets are correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.robot b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.robot
index 58bc7b6..6f69423 100644 (file)
--- a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.robot
+++ b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.robot
@@ -26,20 +26,23 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Segment routing over IPv6 dataplane with two SIDs\
-| ... | (SRH inserted) test suite.*
-|
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
+| Documentation | **Segment routing over IPv6 dataplane with two SIDs \
+| ... | (SRH inserted) test suite.**
+| ... |
+| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6\
-| ... | addresses, static ARP record, route and IPv6 forwarding over SRv6\
+| ... |
+| ... | - **[Cfg] DUT configuration:** On DUT1 configure physical interface \
+| ... | IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 \
 | ... | with two SIDs - Segment Routing Header inserted.
-| ... | *[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one\
-| ... | direction. Packet is received and verified for correctness on TG. Then\
-| ... | ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is\
-| ... | received and verified for correctness on TG.
-| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
-| ... | draft 3.
+| ... |
+| ... | - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in \
+| ... | one direction. Packet is received and verified for correctness on TG. \
+| ... | Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet \
+| ... | is received and verified for correctness on TG.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \
+| ... | Programming - draft 3.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -75,10 +78,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 is configured with IPv6 routing and static route,\
-| | ... | SR policy and steering policy for one direction and two SR\
+| | ... | - **[Cfg]** DUT1 is configured with IPv6 routing and static route, \
+| | ... | SR policy and steering policy for one direction and two SR \
 | | ... | behaviours (functions) - End and End.DX6 - for other direction.
-| | ... | [Ver] Make TG send IPv6 packets routed over DUT1 interfaces.\
+| | ... | - **[Ver]** Make TG send IPv6 packets routed over DUT1 interfaces. \
 | | ... | Make TG verify IPv6 packets are correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy.robot b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy.robot
index 2bb20ac..dd5f6fa 100644 (file)
--- a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy.robot
+++ b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy.robot
@@ -26,20 +26,23 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Segment routing over IPv6 dataplane with Dynamic\
-| ... | SRv6 proxy test suite.*
-|
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
+| Documentation | **Segment routing over IPv6 dataplane with Dynamic \
+| ... | SRv6 proxy test suite.**
+| ... |
+| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6\
-| ... | addresses, static ARP record, route and IPv6 forwarding over SRv6\
+| ... |
+| ... | - **[Cfg] DUT configuration:** On DUT1 configure physical interface \
+| ... | IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 \
 | ... | with three SIDs - Segment Routing Header inserted.
-| ... | *[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one\
-| ... | direction. Packet is received and verified for correctness on TG. Then\
-| ... | ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is\
-| ... | received and verified for correctness on TG.
-| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
-| ... | draft 3.
+| ... |
+| ... | - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in \
+| ... | one direction. Packet is received and verified for correctness on TG. \
+| ... | Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet \
+| ... | is received and verified for correctness on TG.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \
+| ... | Programming - draft 3.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -88,10 +91,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 is configured with IPv6 routing and static route,\
-| | ... | SR policy and steering policy for one direction and one SR\
+| | ... | - **[Cfg]** DUT1 is configured with IPv6 routing and static route, \
+| | ... | SR policy and steering policy for one direction and one SR \
 | | ... | behaviour (function) - End.AD - for other direction.
-| | ... | [Ver] Make TG send IPv6 packets routed over DUT1 interfaces.\
+| | ... | - **[Ver]** Make TG send IPv6 packets routed over DUT1 interfaces. \
 | | ... | Make TG verify IPv6 packets are correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy.robot b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy.robot
index 44ea258..379310e 100644 (file)
--- a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy.robot
+++ b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy.robot
@@ -26,20 +26,23 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Segment routing over IPv6 dataplane with Masquerading\
-| ... | SRv6 proxy test cases*
-|
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
+| Documentation | **Segment routing over IPv6 dataplane with Masquerading \
+| ... | SRv6 proxy test cases**
+| ... |
+| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6\
-| ... | addresses, static ARP record, route and IPv6 forwarding over SRv6\
+| ... |
+| ... | - **[Cfg] DUT configuration:** On DUT1 configure physical interface \
+| ... | IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 \
 | ... | with three SIDs - Segment Routing Header inserted.
-| ... | *[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one\
-| ... | direction. Packet is received and verified for correctness on TG. Then\
-| ... | ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is\
-| ... | received and verified for correctness on TG.
-| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
-| ... | draft 3.
+| ... |
+| ... | - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in \
+| ... | one direction. Packet is received and verified for correctness on TG. \
+| ... | Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet \
+| ... | is received and verified for correctness on TG.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \
+| ... | Programming - draft 3.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -88,10 +91,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 is configured with IPv6 routing and static route,\
-| | ... | SR policy and steering policy for one direction and one SR\
+| | ... | - **[Cfg]** DUT1 is configured with IPv6 routing and static route, \
+| | ... | SR policy and steering policy for one direction and one SR \
 | | ... | behaviour (function) - End.AM - for other direction.
-| | ... | [Ver] Make TG send IPv6 packets routed over DUT1 interfaces.\
+| | ... | - **[Ver]** Make TG send IPv6 packets routed over DUT1 interfaces. \
 | | ... | Make TG verify IPv6 packets are correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy.robot b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy.robot
index 6357fde..43cd587 100644 (file)
--- a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy.robot
+++ b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy.robot
@@ -26,20 +26,23 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Segment routing over IPv6 dataplane with Static\
-| ... | SRv6 proxy test cases.*
-|
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
+| Documentation | **Segment routing over IPv6 dataplane with Static \
+| ... | SRv6 proxy test cases.**
+| ... |
+| ... | - **[Top] Network topologies:** TG-DUT1 2-node topology with one link \
 | ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6\
-| ... | addresses, static ARP record, route and IPv6 forwarding over SRv6\
+| ... |
+| ... | - **[Cfg] DUT configuration:** On DUT1 configure physical interface \
+| ... | IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 \
 | ... | with three SIDs - Segment Routing Header inserted.
-| ... | *[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one\
-| ... | direction. Packet is received and verified for correctness on TG. Then\
-| ... | ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is\
-| ... | received and verified for correctness on TG.
-| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
-| ... | draft 3.
+| ... |
+| ... | - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in \
+| ... | one direction. Packet is received and verified for correctness on TG. \
+| ... | Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet \
+| ... | is received and verified for correctness on TG.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \
+| ... | Programming - draft 3.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -88,10 +91,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 is configured with IPv6 routing and static route,\
-| | ... | SR policy and steering policy for one direction and one SR\
+| | ... | - **[Cfg]** DUT1 is configured with IPv6 routing and static route, \
+| | ... | SR policy and steering policy for one direction and one SR \
 | | ... | behaviour (function) - End.AS - for other direction.
-| | ... | [Ver] Make TG send IPv6 packets routed over DUT1 interfaces.\
+| | ... | - **[Ver]** Make TG send IPv6 packets routed over DUT1 interfaces. \
 | | ... | Make TG verify IPv6 packets are correct.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy.robot b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy.robot
index 7d9cce5..88b105e 100644 (file)
--- a/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy.robot
+++ b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy.robot
@@ -25,19 +25,25 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 routing test cases with vhost user interface*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
-| ... | VM and single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing on both links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
-| ... | two static IPv4 /24 route entries. Qemu Guest is connected to VPP via \
-| ... | vhost-user interfaces. Guest is running VPP ip4 interconnecting \
+| Documentation | **IPv4 routing test cases with vhost user interface**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with VM and single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing on both \
+| ... | links.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and two static IPv4 /24 route entries. Qemu Guest is connected to VPP \
+| ... | via vhost-user interfaces. Guest is running VPP ip4 interconnecting \
 | ... | vhost-user interfaces.
-| ... | *[Ver] TG verification:* Test IPv4 packet with IP protocol=61 is sent \
-| ... | in one direction by TG on links to DUT1; on receive TG verifies packet \
-| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packet with IP protocol=61 is \
+| ... | sent in one direction by TG on links to DUT1; on receive TG verifies \
+| ... | packet for correctness and their IPv4 src-addr, dst-addr and MAC \
+| ... | addresses.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC791, RFC826, RFC792
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so

diff --git a/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy.robot b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy.robot
index 165d16e..338914d 100644 (file)
--- a/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy.robot
+++ b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy.robot
@@ -26,21 +26,25 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *L2 bridge-domain test cases with vhost user interface*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
-| ... | VM and single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 \
+| Documentation | **L2 bridge-domain test cases with vhost user interface**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with VM and single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 \
 | ... | bridge-domains (L2BD) switching combined with MAC learning enabled. \
 | ... | Qemu Guest is connected to VPP via vhost-user interfaces. Guest is \
 | ... | configured with VPP l2 cross-connect interconnecting vhost-user \
 | ... | interfaces.
-| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 are \
-| ... | sent in both directions by TG on links to DUT1 via VM; on receive TG \
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 are \
+| ... | sent in both directions by TG on links to DUT1 via VM; on receive TG. \
 | ... | verifies packets for correctness and their IPv4 src-addr, dst-addr \
 | ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC792
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC792
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -62,10 +66,13 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4. [Cfg] On DUT1 configure \
+| | ... | - **[Top]** TG=DUT=VM. 
+| | ... | - **[Enc]** Eth-IPv4.
+| | ... | - **[Cfg]** On DUT1 configure \
 | | ... | two L2BDs with MAC learning, each with vhost-user i/f to local \
 | | ... | VM and i/f to TG; configure VPP in VM to loop pkts back betwen its \
-| | ... | two virtio i/fs. [Ver] Make TG verify IPv4 packets are switched \
+| | ... | two virtio i/fs. 
+| | ... | - **[Ver]** Make TG verify IPv4 packets are switched \
 | | ... | thru DUT1 and VM in both directions and are correct on receive.
 | |
 | | ... | *Arguments:*

diff --git a/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot
index 4f8df59..734b162 100644 (file)
--- a/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot
+++ b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot
@@ -25,20 +25,24 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *L2 cross-connect test cases with vhost user interface*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
-| ... | VM and single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \
+| Documentation | **L2 cross-connect test cases with vhost user interface**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with VM and single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \
 | ... | (L2XC) switching. Qemu Guest is connected to VPP via vhost-user \
-| ... | interfaces. Guest is configured with VPP l2 cross-connect \
+| ... | interfaces. Guest is configured with VPP l2 cross-connect. \
 | ... | interconnecting vhost-user interfaces.
-| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 are \
-| ... | sent in both directions by TG on links to DUT1 via VM; on receive TG \
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 are \
+| ... | sent in both directions by TG on links to DUT1 via VM; on receive TG. \
 | ... | verifies packets for correctness and their IPv4 src-addr, dst-addr \
 | ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC792
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC792
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -60,9 +64,12 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4. [Cfg] On DUT configure \
+| | ... | - **[Top]** TG=DUT=VM.
+| | ... | - **[Enc]** Eth-IPv4.
+| | ... | - **[Cfg]** On DUT configure \
 | | ... | two L2 cross-connects (L2XC), each with one untagged interface \
-| | ... | to TG and untagged i/f to local VM over vhost-user. [Ver] Make \
+| | ... | to TG and untagged i/f to local VM over vhost-user.
+| | ... | - **[Ver]** Make \
 | | ... | TG send IPv4 packets in both directions between two of its \
 | | ... | i/fs to be switched by DUT to and from VM; verify all packets \
 | | ... | are received. [Ref]

diff --git a/tests/vpp/device/vm_vhost/ethip6/2n1l-10ge2p1x710-ethip6-ip6base-eth-2vhost-1vm-scapy.robot b/tests/vpp/device/vm_vhost/ethip6/2n1l-10ge2p1x710-ethip6-ip6base-eth-2vhost-1vm-scapy.robot
index 33313e0..e1ce837 100644 (file)
--- a/tests/vpp/device/vm_vhost/ethip6/2n1l-10ge2p1x710-ethip6-ip6base-eth-2vhost-1vm-scapy.robot
+++ b/tests/vpp/device/vm_vhost/ethip6/2n1l-10ge2p1x710-ethip6-ip6base-eth-2vhost-1vm-scapy.robot
@@ -25,19 +25,25 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 routing test cases with vhost user interface*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
-| ... | VM and single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing on both links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \
+| Documentation | **IPv4 routing test cases with vhost user interface**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with VM and single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing on both \
+| ... | links.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
 | ... | two static IPv6 /64 route entries. Qemu Guest is connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP ip6 interconnecting \
 | ... | vhost-user interfaces.
-| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \
-| ... | by TG on links to DUT1; on receive TG verifies packets for correctness \
-| ... | and their IPv6 src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC2460, RFC4443, RFC4861
+| ... |
+| ... | - **[Ver] TG verification:** Test IPv6 packets are sent in one \
+| ... | direction by TG on links to DUT1; on receive TG verifies packets for \
+| ... | correctness and their IPv6 src-addr, dst-addr and MAC addresses.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2460, RFC4443, \
+| ... | RFC4861.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -91,7 +97,6 @@
 | | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
 | | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
 
-
 *** Test Cases ***
 | 78B-0c-ethip6-ip6base-eth-2vhost-1vm-scapy
 | | [Tags] | 78B | 0C

diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
index 36a1e69..c06d7dd 100644 (file)
--- a/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
@@ -27,31 +27,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with memif and IEEE 802.1Q test
-| ... | cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. IEEE\
+| Documentation | **RFC2544: Pkt throughput L2BD with memif and IEEE 802.1Q \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. IEEE \
 | ... | 802.1Q tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2\
-| ... | bridge domains and MAC learning enabled. Container is connected to VPP\
-| ... | via Memif interface. Container is running same VPP version as running\
-| ... | on DUT. Container is limited via cgroup to use 3 cores allocated from\
-| ... | pool of isolated CPUs. There are no memory constraints. DUT1 and DUT2\
-| ... | tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are\
-| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\
-| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP\
-| ... | protocol=61 and static payload. MAC addresses are matching MAC\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with two \
+| ... | L2 bridge domains and MAC learning enabled. Container is connected to \
+| ... | VPP via Memif interface. Container is running same VPP version as \
+| ... | running on DUT. Container is limited via cgroup to use 3 cores \
+| ... | allocated from pool of isolated CPUs. There are no memory constraints. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are \
+| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \
+| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -77,9 +82,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot
index 954330e..dd2cbd9 100644 (file)
--- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot
@@ -27,26 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2
-| ... | bridge domains and MAC learning enabled. LXC is connected to VPP via
-| ... | Memif interface. LXC is running same VPP version as running on DUT. LXC
-| ... | is limited via cgroup to use 3 cores allocated from pool of isolated
-| ... | CPUs. There are no memory constraints. DUT1 and DUT2 tested with
-| ... | ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with two \
+| ... | L2 bridge domains and MAC learning enabled. LXC is connected to VPP \
+| ... | via Memif interface. LXC is running same VPP version as running on \
+| ... | DUT. LXC is limited via cgroup to use 3 cores allocated from pool of \
+| ... | isolated CPUs. There are no memory constraints. DUT1 and DUT2 are \
+| ... | tested with with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -69,9 +73,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot
index 98e7b65..79c0529 100644 (file)
--- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot
@@ -27,26 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
-| ... | connect. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use 3 cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2XC test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | cross-connect. DUT1 and DUT2 tested with ${nic_name}.
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | use 3 cores allocated from pool of isolated CPUs. There are no memory \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -69,9 +73,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config.
+| | ... | - **[Cfg]** DUT runs L2XC switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot
index 1338076..cb89c62 100644 (file)
--- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot
@@ -27,25 +27,29 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
-| ... | connect. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | LXC is connected to VPP via Memif interface. LXC is running same VPP
-| ... | version as running on DUT. LXC is limited via cgroup to use 3 cores
+| Documentation | **RFC2544: Pkt throughput L2XC test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | cross-connect. DUT1 and DUT2 tested with ${nic_name}.
+| ... | LXC is connected to VPP via Memif interface. LXC is running same VPP \
+| ... | version as running on DUT. LXC is limited via cgroup to use 3 cores \
 | ... | allocated from pool of isolated CPUs. There are no memory contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -68,9 +72,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config.
+| | ... | - **[Cfg]** DUT runs L2XC switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot
index 596ecba..9dae833 100644 (file)
--- a/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot
@@ -26,26 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
-| ... | routing with two FIB tables and two static IPv4 /24 route entries per
-| ... | FIB table. Container is connected to VPP via Memif interface. Container
-| ... | is running same VPP version as running on DUT. Container is limited via
-| ... | cgroup to use cores allocated from pool of isolated CPUs. There are no
-| ... | memory contraints. DUTs are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing with two FIB tables and two static IPv4 /24 route entries per \
+| ... | FIB table. Container is connected to VPP via Memif interface. \
+| ... | Container is running same VPP version as running on DUT. Container is \
+| ... | limited via cgroup to use cores allocated from pool of isolated CPUs. \
+| ... | There are no memory contraints. DUTs are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -68,9 +72,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
index fad1dce..eb3dfb2 100644 (file)
--- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
@@ -27,31 +27,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with memif and IEEE 802.1Q test
-| ... | cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. IEEE\
+| Documentation | **RFC2544: Pkt throughput L2BD with memif and IEEE 802.1Q 
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. IEEE \
 | ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge\
-| ... | domains and MAC learning enabled. Container is connected to VPP via\
-| ... | Memif interface. Container is running same VPP version as running\
-| ... | on DUT. Container is limited via cgroup to use 3 cores allocated from\
-| ... | pool of isolated CPUs. There are no memory constraints. DUT1 is tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are\
-| ... | generated by TG on links to DUT1. TG traffic profile contains two L3\
-| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP\
-| ... | protocol=61 and static payload. MAC addresses are matching MAC\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. Container is connected to VPP via \
+| ... | Memif interface. Container is running same VPP version as running \
+| ... | on DUT. Container is limited via cgroup to use 3 cores allocated from \
+| ... | pool of isolated CPUs. There are no memory constraints. DUT1 is tested \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are \
+| ... | generated by TG on links to DUT1. TG traffic profile contains two L3 \
+| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -77,9 +82,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
index 357cc7b..bbc772e 100644 (file)
--- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
@@ -27,26 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -69,9 +73,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot
index b23549f..7a0f23a 100644 (file)
--- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot
@@ -27,26 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect.
-| ... | DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2XC test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \
+| ... | DUT1 tested with ${nic_name}.
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -69,9 +73,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config.
+| | ... | - **[Cfg]** DUT runs L2XC switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot
index fde9195..db383c4 100644 (file)
--- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot
@@ -27,26 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing with
-| ... | two FIB tables and two static IPv4 /24 route entries per FIB table.
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints. DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | with two FIB tables and two static IPv4 /24 route entries per FIB \
+| ... | table. Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints. DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -69,9 +73,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index 00c03aa..e18c213 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
index 5114bae..9bc9399 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
index 61817dc..496cb5e 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
index 5d0b32e..c28be98 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC4301: SPD lookup performance*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
-| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
-| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
-| ... | outbound traffic is matched and only the last rule is the matching
-| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled.
-| ... | DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
-| ... | the lowest priority rule matching the traffic. The action of the
+| Documentation | **RFC4301: SPD lookup performance**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \
+| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \
+| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \
+| ... | outbound traffic is matched and only the last rule is the matching \
+| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \
+| ... | the lowest priority rule matching the traffic. The action of the \
 | ... | matching rule is BYPASS. No encryption or authentication is done.
-| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -73,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
index 426d31a..aeacb8b 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -27,29 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC4301: SPD lookup performance*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
-| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
-| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
-| ... | outbound traffic is matched and only the last rule is the matching
-| ... | rule. DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
-| ... | the lowest priority rule matching the traffic. The action of the
+| Documentation | **RFC4301: SPD lookup performance**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \
+| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \
+| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \
+| ... | outbound traffic is matched and only the last rule is the matching \
+| ... | rule. DUT1 tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \
+| ... | the lowest priority rule matching the traffic. The action of the \
 | ... | matching rule is BYPASS. No encryption or authentication is done.
-| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index d90cd13..cabcaa7 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot
index a274a2d..7c75230 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -28,29 +28,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +88,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot
index 31c8624..a67833b 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot
index ba807b5..1cb3c8d 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 IPsec tunnel mode performance test suite.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **IPv4 IPsec tunnel mode performance test suite.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUTs runs IPsec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUTs runs IPsec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index ba94261..3c6be8b 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -29,29 +29,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -82,9 +88,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot
index 3a320ea..775a798 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot
@@ -29,29 +29,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -82,9 +88,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot
index ac36474..ad7484f 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot
@@ -29,29 +29,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -82,9 +88,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot
index 08f02de..fcf26db 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot
@@ -29,29 +29,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 IPsec tunnel mode performance test suite.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **IPv4 IPsec tunnel mode performance test suite.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -82,9 +88,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUTs runs IPsec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUTs runs IPsec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index 4a76407..22389da 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
index aa47c70..58c1f8b 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
index 0478bf6..c718eb4 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
index ce3c716..a42ecfe 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 IPsec tunnel mode performance test suite.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **IPv4 IPsec tunnel mode performance test suite.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
index aa832ef..6e1c417 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC4301: SPD lookup performance*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
-| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
-| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
-| ... | outbound traffic is matched and only the last rule is the matching
-| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled.
-| ... | DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
-| ... | the lowest priority rule matching the traffic. The action of the
+| Documentation | **RFC4301: SPD lookup performance**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \
+| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \
+| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \
+| ... | outbound traffic is matched and only the last rule is the matching \
+| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \
+| ... | DUT1 tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \
+| ... | the lowest priority rule matching the traffic. The action of the \
 | ... | matching rule is BYPASS. No encryption or authentication is done.
-| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -73,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
index 2b0e9df..f6867f9 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -27,29 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC4301: SPD lookup performance*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
-| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
-| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
-| ... | outbound traffic is matched and only the last rule is the matching
-| ... | rule. DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
-| ... | the lowest priority rule matching the traffic. The action of the
+| Documentation | **RFC4301: SPD lookup performance**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \
+| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \
+| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \
+| ... | outbound traffic is matched and only the last rule is the matching \
+| ... | rule. DUT1 tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \
+| ... | the lowest priority rule matching the traffic. The action of the \
 | ... | matching rule is BYPASS. No encryption or authentication is done.
-| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
index 2fd02fe..e58b33c 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC4301: SPD lookup performance*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
-| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
-| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
-| ... | outbound traffic is matched and only the last rule is the matching
-| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled.
-| ... | DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
-| ... | the lowest priority rule matching the traffic. The action of the
+| Documentation | **RFC4301: SPD lookup performance**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \
+| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \
+| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \
+| ... | outbound traffic is matched and only the last rule is the matching \
+| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \
+| ... | DUT1 tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \
+| ... | the lowest priority rule matching the traffic. The action of the \
 | ... | matching rule is BYPASS. No encryption or authentication is done.
-| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -73,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
index f6b606f..80298dd 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -27,29 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC4301: SPD lookup performance*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
-| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
-| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
-| ... | outbound traffic is matched and only the last rule is the matching
-| ... | rule. DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
-| ... | the lowest priority rule matching the traffic. The action of the
+| Documentation | **RFC4301: SPD lookup performance**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \
+| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \
+| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \
+| ... | outbound traffic is matched and only the last rule is the matching \
+| ... | rule. DUT1 tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \
+| ... | the lowest priority rule matching the traffic. The action of the \
 | ... | matching rule is BYPASS. No encryption or authentication is done.
-| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
index 458c739..088f834 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC4301: SPD lookup performance*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
-| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
-| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
-| ... | outbound traffic is matched and only the last rule is the matching
-| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled.
-| ... | DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
-| ... | the lowest priority rule matching the traffic. The action of the
+| Documentation | **RFC4301: SPD lookup performance**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \
+| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \
+| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \
+| ... | outbound traffic is matched and only the last rule is the matching \
+| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \
+| ... | DUT1 tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \
+| ... | the lowest priority rule matching the traffic. The action of the \
 | ... | matching rule is BYPASS. No encryption or authentication is done.
-| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -73,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
index 8feb89f..212637e 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -27,21 +27,25 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC4301: SPD lookup performance*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| Documentation | **RFC4301: SPD lookup performance**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, two
 | ... | static IPv4 /24 route entries, one SPD on each outbound interface in
 | ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
 | ... | outbound traffic is matched and only the last rule is the matching
-| ... | rule. DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | rule. DUT1 tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile
 | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
 | ... | flow-group) with all packets containing Ethernet header, IPv4 header
@@ -49,7 +53,8 @@
 | ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
 | ... | the lowest priority rule matching the traffic. The action of the
 | ... | matching rule is BYPASS. No encryption or authentication is done.
-| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index 0870978..cf3cfa0 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot
index d7decdc..169f4e6 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot
index d6b180a..f58e2db 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot
index 9539e5c..317d181 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot
@@ -28,29 +28,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 IPsec tunnel mode performance test suite.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **IPv4 IPsec tunnel mode performance test suite.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +88,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUTs runs IPsec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUTs runs IPsec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index 39d3370..4832a75 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -29,29 +29,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -82,9 +88,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot
index 2f04a4f..d7a2ef1 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot
@@ -29,29 +29,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -82,9 +88,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot
index 4988b11..11f3125 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot
@@ -29,29 +29,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -82,9 +89,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot
index 79e8ff0..cfe5bcd 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot
@@ -29,29 +29,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 IPsec tunnel mode performance test suite.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **IPv4 IPsec tunnel mode performance test suite.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -82,9 +89,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUTs runs IPsec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUTs runs IPsec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index 0b792ad..95a1a73 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
index 7fc57fc..435b26d 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
index 201db7c..21a749e 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.\
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
index 27ab791..11b5e0d 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 IPsec tunnel mode performance test suite.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **IPv4 IPsec tunnel mode performance test suite.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index 20ee4f0..e0863e1 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -29,31 +29,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get
-| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets
-| ... | are decrypted and sent back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them, run with IPsec async mode and \
+| ... | use crypto sw scheduler engine to schedule crypto work to crypto \
+| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \
+| ... | DUT, where packets are decrypted and sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -86,10 +91,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot
index e41197d..50c7a9b 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot
@@ -29,31 +29,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get
-| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets
-| ... | are decrypted and sent back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them, run with IPsec async mode and \
+| ... | use crypto sw scheduler engine to schedule crypto work to crypto \
+| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \
+| ... | DUT, where packets are decrypted and sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -86,10 +91,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot
index fb329c4..4d10947 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot
@@ -29,31 +29,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get
-| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets
-| ... | are decrypted and sent back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them, run with IPsec async mode and \
+| ... | use crypto sw scheduler engine to schedule crypto work to crypto \
+| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \
+| ... | DUT, where packets are decrypted and sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -86,10 +91,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index dee4b47..8f43531 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -29,31 +29,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get
-| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets
-| ... | are decrypted and sent back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them, run with IPsec async mode and \
+| ... | use crypto sw scheduler engine to schedule crypto work to crypto \
+| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \
+| ... | DUT, where packets are decrypted and sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -86,10 +91,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot
index 71b7f45..fece728 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot
@@ -29,31 +29,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get
-| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets
-| ... | are decrypted and sent back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them, run with IPsec async mode and \
+| ... | use crypto sw scheduler engine to schedule crypto work to crypto \
+| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \
+| ... | DUT, where packets are decrypted and sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -86,10 +91,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot
index 7e70563..f14e9ff 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot
@@ -29,31 +29,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get
-| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets
-| ... | are decrypted and sent back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them, run with IPsec async mode and \
+| ... | use crypto sw scheduler engine to schedule crypto work to crypto \
+| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \
+| ... | DUT, where packets are decrypted and sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -86,10 +91,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index dd84ed6..e30a012 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
index 24cb2c6..ae41bc2 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
index 2a6acf8..0a433d8 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
index 636c7a6..e3ed8b5 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
@@ -28,27 +28,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\
-| ... | with zero packet loss tolerance, then measures loss at this load\
-| ... | while additional chain is configured.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \
+| ... | with zero packet loss tolerance, then measures loss at this load \
+| ... | while additional chain is configured. \
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -80,9 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
index 8a53268..999cef1 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
@@ -28,27 +28,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\
-| ... | with zero packet loss tolerance, then measures loss at this load\
-| ... | while additional chain is configured.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \
+| ... | with zero packet loss tolerance, then measures loss at this load \
+| ... | while additional chain is configured. \
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
index e304148..fa2a96b 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
@@ -28,27 +28,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\
-| ... | with zero packet loss tolerance, then measures loss at this load\
-| ... | while additional chain is configured.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \
+| ... | with zero packet loss tolerance, then measures loss at this load \
+| ... | while additional chain is configured. \
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index cfe69cc..6d23dd6 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
index 19fe730..ec10c0c 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
index 29c71fd..749c67b 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
index be942b4..e35a234 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 IPsec tunnel mode performance test suite.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **IPv4 IPsec tunnel mode performance test suite.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index a1cec33..7aa00d3 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -29,29 +29,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -82,9 +88,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot
index 86ac979..6a361a4 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot
@@ -29,29 +29,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -82,9 +88,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot
index 1ef92d2..3da2ab8 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot
@@ -29,29 +29,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -82,9 +88,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index bb7a920..bdaa20a 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
index 76105f8..f7f8eae 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
index 099440e..46d8435 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
index f37bd0f..518f5b7 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *IPv4 IPsec tunnel mode performance test suite.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **IPv4 IPsec tunnel mode performance test suite.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index c49da68..0e535d1 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -29,31 +29,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get
-| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets
-| ... | are decrypted and sent back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them, run with IPsec async mode and \
+| ... | use crypto sw scheduler engine to schedule crypto work to crypto \
+| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \
+| ... | DUT, where packets are decrypted and sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -86,10 +91,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot
index 9cd961b..73cbbcb 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot
@@ -29,31 +29,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get
-| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets
-| ... | are decrypted and sent back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them, run with IPsec async mode and \
+| ... | use crypto sw scheduler engine to schedule crypto work to crypto \
+| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \
+| ... | DUT, where packets are decrypted and sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -86,10 +91,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot
index 581d13b..fc6a2f5 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot
@@ -29,31 +29,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get
-| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets
-| ... | are decrypted and sent back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them, run with IPsec async mode and \
+| ... | use crypto sw scheduler engine to schedule crypto work to crypto \
+| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \
+| ... | DUT, where packets are decrypted and sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -86,10 +91,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index 90a124e..fe04947 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -29,31 +29,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get
-| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets
-| ... | are decrypted and sent back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them, run with IPsec async mode and \
+| ... | use crypto sw scheduler engine to schedule crypto work to crypto \
+| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \
+| ... | DUT, where packets are decrypted and sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -86,10 +91,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot
index 1cc1342..debf984 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot
@@ -29,31 +29,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get
-| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets
-| ... | are decrypted and sent back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them, run with IPsec async mode and \
+| ... | use crypto sw scheduler engine to schedule crypto work to crypto \
+| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \
+| ... | DUT, where packets are decrypted and sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -86,10 +91,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot
index 82beb0b..9039f44 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot
@@ -29,31 +29,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get
-| ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets
-| ... | are decrypted and sent back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them, run with IPsec async mode and \
+| ... | use crypto sw scheduler engine to schedule crypto work to crypto \
+| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \
+| ... | DUT, where packets are decrypted and sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
 | ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -86,10 +91,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
index 46ece57..ac21dd9 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
index c932340..cefaf33 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
index 809adff..2e5a9e8 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
index 376c6a7..29bc1f0 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC4301: SPD lookup performance*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC4301: SPD lookup performance**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
-| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
-| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
-| ... | outbound traffic is matched and only the last rule is the matching
-| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled.
-| ... | DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
-| ... | the lowest priority rule matching the traffic. The action of the
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \
+| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \
+| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \
+| ... | outbound traffic is matched and only the last rule is the matching \
+| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \
+| ... | the lowest priority rule matching the traffic. The action of the \
 | ... | matching rule is BYPASS. No encryption or authentication is done.
-| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -73,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
index a879952..49414ea 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -27,29 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC4301: SPD lookup performance*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC4301: SPD lookup performance**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
-| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
-| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
-| ... | outbound traffic is matched and only the last rule is the matching
-| ... | rule. DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
-| ... | the lowest priority rule matching the traffic. The action of the
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \
+| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \
+| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \
+| ... | outbound traffic is matched and only the last rule is the matching \
+| ... | rule. DUT1 tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \
+| ... | the lowest priority rule matching the traffic. The action of the \
 | ... | matching rule is BYPASS. No encryption or authentication is done.
-| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
index 74e89fb..8c6a893 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
index 3e112fe..e1fd3ac 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
index c2cb1bc..f90534e 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot
index d3e9fa3..5921cd1 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
index 30d5b45..8d30848 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC4301: SPD lookup performance*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC4301: SPD lookup performance**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
-| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
-| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
-| ... | outbound traffic is matched and only the last rule is the matching
-| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled.
-| ... | DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
-| ... | the lowest priority rule matching the traffic. The action of the
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \
+| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \
+| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \
+| ... | outbound traffic is matched and only the last rule is the matching \
+| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \
+| ... | the lowest priority rule matching the traffic. The action of the \
 | ... | matching rule is BYPASS. No encryption or authentication is done.
-| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -73,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
index 62f179f..b9780e2 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -27,29 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC4301: SPD lookup performance*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC4301: SPD lookup performance**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
-| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
-| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
-| ... | outbound traffic is matched and only the last rule is the matching
-| ... | rule. DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
-| ... | the lowest priority rule matching the traffic. The action of the
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \
+| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \
+| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \
+| ... | outbound traffic is matched and only the last rule is the matching \
+| ... | rule. DUT1 tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \
+| ... | the lowest priority rule matching the traffic. The action of the \
 | ... | matching rule is BYPASS. No encryption or authentication is done.
-| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
index 0ad9885..e7099ab 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC4301: SPD lookup performance*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC4301: SPD lookup performance**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
-| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
-| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
-| ... | outbound traffic is matched and only the last rule is the matching
-| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled.
-| ... | DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
-| ... | the lowest priority rule matching the traffic. The action of the
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \
+| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \
+| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \
+| ... | outbound traffic is matched and only the last rule is the matching \
+| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \
+| ... | the lowest priority rule matching the traffic. The action of the \
 | ... | matching rule is BYPASS. No encryption or authentication is done.
-| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -73,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
index bffabe4..9e2ab54 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -27,29 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC4301: SPD lookup performance*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC4301: SPD lookup performance**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
-| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
-| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
-| ... | outbound traffic is matched and only the last rule is the matching
-| ... | rule. DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
-| ... | the lowest priority rule matching the traffic. The action of the
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \
+| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \
+| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \
+| ... | outbound traffic is matched and only the last rule is the matching \
+| ... | rule. DUT1 tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \
+| ... | the lowest priority rule matching the traffic. The action of the \
 | ... | matching rule is BYPASS. No encryption or authentication is done.
-| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
index dbc4bc4..0cae13a 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC4301: SPD lookup performance*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC4301: SPD lookup performance**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
-| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
-| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
-| ... | outbound traffic is matched and only the last rule is the matching
-| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled.
-| ... | DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
-| ... | the lowest priority rule matching the traffic. The action of the
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \
+| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \
+| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \
+| ... | outbound traffic is matched and only the last rule is the matching \
+| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \
+| ... | the lowest priority rule matching the traffic. The action of the \
 | ... | matching rule is BYPASS. No encryption or authentication is done.
-| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -73,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
index 3e3ca4d..9a3c82e 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -27,29 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC4301: SPD lookup performance*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC4301: SPD lookup performance**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
-| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
-| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
-| ... | outbound traffic is matched and only the last rule is the matching
-| ... | rule. DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
-| ... | the lowest priority rule matching the traffic. The action of the
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \
+| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \
+| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \
+| ... | outbound traffic is matched and only the last rule is the matching \
+| ... | rule. DUT1 tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \
+| ... | the lowest priority rule matching the traffic. The action of the \
 | ... | matching rule is BYPASS. No encryption or authentication is done.
-| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
index 410b840..7e751d8 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
index ec3420c..c7d6014 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
index ee23412..d8f55b8 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot
index 75d0584..7698f93 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
index 17ab11f..bcfe4b2 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
@@ -29,29 +29,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG, run with IPsec async mode and use crypto \
+| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \
 | ... | IPv4 traffic from TG, encrypts it and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -83,10 +88,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot
index 2a8fb61..7681e1f 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot
@@ -29,29 +29,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG, run with IPsec async mode and use crypto \
+| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \
 | ... | IPv4 traffic from TG, encrypts it and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -83,10 +88,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot
index 48c455d..c137dd3 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot
@@ -29,29 +29,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG, run with IPsec async mode and use crypto \
+| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \
 | ... | IPv4 traffic from TG, encrypts it and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -83,10 +88,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
index 7d617d6..0f4cded 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
@@ -29,29 +29,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG, run with IPsec async mode and use crypto \
+| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \
 | ... | IPv4 traffic from TG, encrypts it and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -83,10 +88,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot
index 6a143a3..e7f965d 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot
@@ -29,29 +29,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG, run with IPsec async mode and use crypto \
+| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \
 | ... | IPv4 traffic from TG, encrypts it and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -83,10 +88,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot
index ca3e082..c9de66e 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot
@@ -29,29 +29,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG, run with IPsec async mode and use crypto \
+| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \
 | ... | IPv4 traffic from TG, encrypts it and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -83,10 +88,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
index d52dc03..a3a5336 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
index f5fdcf0..d6a2a6a 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
index d11eb54..4b0fe7f 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot
index 69d2833..49d121a 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot
@@ -28,27 +28,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\
-| ... | with zero packet loss tolerance, then measures loss at this load\
-| ... | while additional tunnels are configured.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains one L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \
+| ... | with zero packet loss tolerance, then measures loss at this load \
+| ... | while additional tunnels are configured. \
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains one L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +83,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot
index 1e637f6..d0e11c7 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot
@@ -28,27 +28,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\
-| ... | with zero packet loss tolerance, then measures loss at this load\
-| ... | while additional tunnels are configured.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains one L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \
+| ... | with zero packet loss tolerance, then measures loss at this load \
+| ... | while additional tunnels are configured. \
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains one L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +83,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot
index e8364bf..3d4f5c9 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot
@@ -28,27 +28,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\
-| ... | with zero packet loss tolerance, then measures loss at this load\
-| ... | while additional tunnels are configured.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains one L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \
+| ... | with zero packet loss tolerance, then measures loss at this load \
+| ... | while additional tunnels are configured. \
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains one L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +83,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
index 846db8d..1b05438 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
index 82dba4d..b667af1 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
index e8f38ca..cc53112 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot
index 6e3f567..7b68c96 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
index 8662424..a3b5be0 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \
+| | ... | threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
index a563b46..073addc 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
index 0b5ec6e..692412b 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot
index 656aa2c..faee83f 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot
@@ -28,28 +28,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \
 | ... | and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
index 9546a3c..cc95228 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
@@ -29,29 +29,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG, run with IPsec async mode and use crypto \
+| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \
 | ... | IPv4 traffic from TG, encrypts it and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -83,10 +88,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot
index f0cfa03..1bd07d8 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot
@@ -29,29 +29,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG, run with IPsec async mode and use crypto \
+| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \
 | ... | IPv4 traffic from TG, encrypts it and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -83,10 +88,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot
index 9156265..1afd38f 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot
@@ -29,29 +29,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG, run with IPsec async mode and use crypto \
+| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \
 | ... | IPv4 traffic from TG, encrypts it and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -83,10 +88,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
index d717cd0..951aba3 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot
@@ -29,29 +29,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG, run with IPsec async mode and use crypto \
+| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \
 | ... | IPv4 traffic from TG, encrypts it and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -83,10 +88,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot
index 5e7c2e0..6df954a 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot
@@ -29,29 +29,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG, run with IPsec async mode and use crypto \
+| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \
 | ... | IPv4 traffic from TG, encrypts it and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -83,10 +88,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot
index 94d6222..e21e4fb 100644 (file)
--- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot
@@ -29,29 +29,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
-| ... | Eth-IPv4-IPSec on DUT1-TG
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
-| ... | tunnels between it and TG, run with IPsec async mode and use crypto
-| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
+| ... | Eth-IPv4-IPSec on DUT1-TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
+| ... | tunnels between it and TG, run with IPsec async mode and use crypto \
+| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \
 | ... | IPv4 traffic from TG, encrypts it and sends back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs.
-| ... | TG traffic profile contains one L3 flow-groups (number of flows
-| ... | per flow-group equals to number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to the stream.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. \
+| ... | TG traffic profile contains one L3 flow-groups (number of flows \
+| ... | per flow-group equals to number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
+| ... | field is applied to the stream.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -83,10 +88,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
-| | ... | Each DUT uses one physical core for data plane workers
+| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
+| | ... | Each DUT uses one physical core for data plane workers \
 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-gso-iperf3-mrr.robot b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-gso-iperf3-mrr.robot
index b7b90a8..5b4aa39 100644 (file)
--- a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-gso-iperf3-mrr.robot
+++ b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-gso-iperf3-mrr.robot
@@ -26,14 +26,19 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases with TAPv2*
-|
-| ... | *[Top] Network Topologies:* DUT1 1-node topology without physical links.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.
-| ... | *[Ver] TG verification:* iPerf3 client/server is used for Packet\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases with TAPv2**
+| ... |
+| ... | - **[Top] Network Topologies:** DUT1 1-node topology without physical \
+| ... | links.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing.
+| ... |
+| ... | - **[Ver] TG verification:** iPerf3 client/server is used for Packet \
 | ... | generation and verification.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | ping_plugin.so | perfmon_plugin.so
@@ -72,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT configuration: DUT1 is configured with IPv4 routing.
-| | ... | [Ver] Measure MaxReceivedRate for ${frame_size}B frames\
-| | ... | using burst trials throughput test.\
+| | ... | - **[Cfg]** DUT configuration: DUT1 is configured with IPv4 routing.
+| | ... | - **[Ver]** Measure MaxReceivedRate for ${frame_size}B frames \
+| | ... | using burst trials throughput test.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer, string

diff --git a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-iperf3-mrr.robot b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-iperf3-mrr.robot
index f2392ae..dddf50b 100644 (file)
--- a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-iperf3-mrr.robot
+++ b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-iperf3-mrr.robot
@@ -26,14 +26,19 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases with TAPv2*
-|
-| ... | *[Top] Network Topologies:* DUT1 1-node topology without physical links.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.
-| ... | *[Ver] TG verification:* iPerf3 client/server is used for Packet\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases with TAPv2**
+| ... |
+| ... | - **[Top] Network Topologies:** DUT1 1-node topology without physical \
+| ... | links.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing.
+| ... |
+| ... | - **[Ver] TG verification:** iPerf3 client/server is used for Packet \
 | ... | generation and verification.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | ping_plugin.so | perfmon_plugin.so
@@ -72,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT configuration: DUT1 is configured with IPv4 routing.
-| | ... | [Ver] Measure MaxReceivedRate for ${frame_size}B frames\
-| | ... | using burst trials throughput test.\
+| | ... | - **[Cfg]** DUT configuration: DUT1 is configured with IPv4 routing.
+| | ... | - **[Ver]** Measure MaxReceivedRate for ${frame_size}B frames \
+| | ... | using burst trials throughput test.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer, string

diff --git a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-gso-iperf3-mrr.robot b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-gso-iperf3-mrr.robot
index ce83dd8..a2ece2f 100644 (file)
--- a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-gso-iperf3-mrr.robot
+++ b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-gso-iperf3-mrr.robot
@@ -26,14 +26,19 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases with VHOST*
-|
-| ... | *[Top] Network Topologies:* DUT1 1-node topology without physical links.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.
-| ... | *[Ver] TG verification:* iPerf3 client/server is used for Packet\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases with VHOST**
+| ... |
+| ... | - **[Top] Network Topologies:** DUT1 1-node topology without physical \
+| ... | links.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing.
+| ... |
+| ... | - **[Ver] TG verification:** iPerf3 client/server is used for Packet \
 | ... | generation and verification.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | ping_plugin.so | perfmon_plugin.so
@@ -76,9 +81,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT configuration: DUT1 is configured with IPv4 routing.
-| | ... | [Ver] Measure MaxReceivedRate for ${frame_size}B frames\
-| | ... | using burst trials throughput test.\
+| | ... | - **[Cfg]** DUT configuration: DUT1 is configured with IPv4 routing.
+| | ... | - **[Ver]** Measure MaxReceivedRate for ${frame_size}B frames \
+| | ... | using burst trials throughput test.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer, string

diff --git a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-iperf3-mrr.robot b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-iperf3-mrr.robot
index 3d6d174..def7e9c 100644 (file)
--- a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-iperf3-mrr.robot
+++ b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-iperf3-mrr.robot
@@ -26,14 +26,19 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases with VHOST*
-|
-| ... | *[Top] Network Topologies:* DUT1 1-node topology without physical links.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.
-| ... | *[Ver] TG verification:* iPerf3 client/server is used for Packet\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases with VHOST**
+| ... |
+| ... | - **[Top] Network Topologies:** DUT1 1-node topology without physical \
+| ... | links.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing.
+| ... |
+| ... | - **[Ver] TG verification:** iPerf3 client/server is used for Packet \
 | ... | generation and verification.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | ping_plugin.so | perfmon_plugin.so
@@ -76,9 +81,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT configuration: DUT1 is configured with IPv4 routing.
-| | ... | [Ver] Measure MaxReceivedRate for ${frame_size}B frames\
-| | ... | using burst trials throughput test.\
+| | ... | - **[Cfg]** DUT configuration: DUT1 is configured with IPv4 routing.
+| | ... | - **[Ver]** Measure MaxReceivedRate for ${frame_size}B frames \
+| | ... | using burst trials throughput test.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer, string

diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpbase-ldpreload-iperf3-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpbase-ldpreload-iperf3-bps.robot
index ced96a7..49b4671 100644 (file)
--- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpbase-ldpreload-iperf3-bps.robot
+++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpbase-ldpreload-iperf3-bps.robot
@@ -29,13 +29,16 @@
 |
 | Test Template | Local template
 |
-| Documentation | *Iperf3 client -> Iperf3 server goodput.*
-|
-| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology
+| Documentation | **Iperf3 client -> Iperf3 server goodput.**
+| ... |
+| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \
 | ... | with single link between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP
-| ... | *[Cfg] DUT configuration:*
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP
+| ... |
+| ... | - **[Cfg] DUT configuration:**
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so

diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpbase-nsim-ldpreload-iperf3-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpbase-nsim-ldpreload-iperf3-bps.robot
index 7ee2d0e..48bf68c 100644 (file)
--- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpbase-nsim-ldpreload-iperf3-bps.robot
+++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpbase-nsim-ldpreload-iperf3-bps.robot
@@ -29,13 +29,16 @@
 |
 | Test Template | Local template
 |
-| Documentation | *Iperf3 client -> Iperf3 server goodput.
-|
-| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology
+| Documentation | **Iperf3 client -> Iperf3 server goodput.**
+| ... |
+| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \
 | ... | with single link between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP
-| ... | *[Cfg] DUT configuration:*
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP
+| ... |
+| ... | - **[Cfg] DUT configuration:**
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nsim_plugin.so

diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpscale1cl10s-ldpreload-iperf3-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpscale1cl10s-ldpreload-iperf3-bps.robot
index 9d4e955..2e7f39d 100644 (file)
--- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpscale1cl10s-ldpreload-iperf3-bps.robot
+++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpscale1cl10s-ldpreload-iperf3-bps.robot
@@ -29,13 +29,16 @@
 |
 | Test Template | Local template
 |
-| Documentation | *Iperf3 client -> Iperf3 server goodput.
-|
-| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology
+| Documentation | **Iperf3 client -> Iperf3 server goodput.**
+| ... |
+| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \
 | ... | with single link between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP
-| ... | *[Cfg] DUT configuration:*
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP
+| ... |
+| ... | - **[Cfg] DUT configuration:**
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so

diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpscale1cl10s-nsim-ldpreload-iperf3-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpscale1cl10s-nsim-ldpreload-iperf3-bps.robot
index 0d23be3..7c272a1 100644 (file)
--- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpscale1cl10s-nsim-ldpreload-iperf3-bps.robot
+++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4tcpscale1cl10s-nsim-ldpreload-iperf3-bps.robot
@@ -29,13 +29,16 @@
 |
 | Test Template | Local template
 |
-| Documentation | *Iperf3 client -> Iperf3 server goodput.
-|
-| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology
+| Documentation | **Iperf3 client -> Iperf3 server goodput.**
+| ... |
+| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \
 | ... | with single link between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP
-| ... | *[Cfg] DUT configuration:*
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP
+| ... |
+| ... | - **[Cfg] DUT configuration:**
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nsim_plugin.so

diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpbase-ldpreload-iperf3-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpbase-ldpreload-iperf3-bps.robot
index d82be0b..a4aa2a0 100644 (file)
--- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpbase-ldpreload-iperf3-bps.robot
+++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpbase-ldpreload-iperf3-bps.robot
@@ -29,13 +29,16 @@
 |
 | Test Template | Local template
 |
-| Documentation | *Iperf3 client -> Iperf3 server goodput.
-|
-| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology
+| Documentation | **Iperf3 client -> Iperf3 server goodput.**
+| ... |
+| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \
 | ... | with single link between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP
-| ... | *[Cfg] DUT configuration:*
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP
+| ... |
+| ... | - **[Cfg] DUT configuration:**
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so

diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicbase-vppecho-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicbase-vppecho-bps.robot
index bd60ac4..199e652 100644 (file)
--- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicbase-vppecho-bps.robot
+++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicbase-vppecho-bps.robot
@@ -28,13 +28,16 @@
 |
 | Test Template | Local template
 |
-| Documentation | *QUIC Unidirectional Echo Client -> Echo Server goodput.
-|
-| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology
+| Documentation | **QUIC Unidirectional Echo Client -> Echo Server goodput.**
+| ... |
+| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \
 | ... | with single link between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP-QUIC
-| ... | *[Cfg] DUT configuration:*
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP-QUIC
+| ... |
+| ... | - **[Cfg] DUT configuration:**
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | quic_plugin.so

diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale10cl10s-vppecho-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale10cl10s-vppecho-bps.robot
index f92770a..9bb0975 100644 (file)
--- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale10cl10s-vppecho-bps.robot
+++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale10cl10s-vppecho-bps.robot
@@ -29,13 +29,16 @@
 |
 | Test Template | Local template
 |
-| Documentation | *QUIC Unidirectional Echo Client -> Echo Server goodput.
-|
-| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology
+| Documentation | **QUIC Unidirectional Echo Client -> Echo Server goodput.**
+| ... |
+| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \
 | ... | with single link between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP-QUIC
-| ... | *[Cfg] DUT configuration:*
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP-QUIC
+| ... |
+| ... | - **[Cfg] DUT configuration:**
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | quic_plugin.so

diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale10cl1s-vppecho-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale10cl1s-vppecho-bps.robot
index f71563e..cc34797 100644 (file)
--- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale10cl1s-vppecho-bps.robot
+++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale10cl1s-vppecho-bps.robot
@@ -29,13 +29,16 @@
 |
 | Test Template | Local template
 |
-| Documentation | *QUIC Unidirectional Echo Client -> Echo Server goodput.
-|
-| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology
+| Documentation | **QUIC Unidirectional Echo Client -> Echo Server goodput.**
+| ... |
+| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \
 | ... | with single link between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP-QUIC
-| ... | *[Cfg] DUT configuration:*
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP-QUIC
+| ... |
+| ... | - **[Cfg] DUT configuration:**
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | quic_plugin.so

diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale1cl10s-vppecho-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale1cl10s-vppecho-bps.robot
index 0092b44..52f399c 100644 (file)
--- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale1cl10s-vppecho-bps.robot
+++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpquicscale1cl10s-vppecho-bps.robot
@@ -29,13 +29,16 @@
 |
 | Test Template | Local template
 |
-| Documentation | *QUIC Unidirectional Echo Client -> Echo Server goodput.
-|
-| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology
+| Documentation | **QUIC Unidirectional Echo Client -> Echo Server goodput.**
+| ... |
+| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \
 | ... | with single link between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP-QUIC
-| ... | *[Cfg] DUT configuration:*
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP-QUIC
+| ... |
+| ... | - **[Cfg] DUT configuration:**
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | quic_plugin.so

diff --git a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpscale1cl10s-ldpreload-iperf3-bps.robot b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpscale1cl10s-ldpreload-iperf3-bps.robot
index 0383c0d..d452f88 100644 (file)
--- a/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpscale1cl10s-ldpreload-iperf3-bps.robot
+++ b/tests/vpp/perf/hoststack/10ge2p1x710-eth-ip4udpscale1cl10s-ldpreload-iperf3-bps.robot
@@ -29,13 +29,16 @@
 |
 | Test Template | Local template
 |
-| Documentation | *Iperf3 client -> Iperf3 server goodput.
-|
-| ... | *[Top] Network Topologies:* DUT-DUT 2-node topology
+| Documentation | **Iperf3 client -> Iperf3 server goodput.**
+| ... |
+| ... | - **[Top] Network Topologies:** DUT-DUT 2-node topology \
 | ... | with single link between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP
-| ... | *[Cfg] DUT configuration:*
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP
+| ... |
+| ... | - **[Cfg] DUT configuration:**
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so

diff --git a/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_14_2-cps.robot b/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_14_2-cps.robot
index e27254c..61c9d64 100644 (file)
--- a/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_14_2-cps.robot
+++ b/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_14_2-cps.robot
@@ -26,14 +26,18 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *TCP requests per seconds.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT-TG 2-node topology\
+| Documentation | **TCP requests per seconds.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT-TG 2-node topology \
 | ... | with single link between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP-HTTP for TCP
-| ... | *[Cfg] DUT configuration:*
-| ... | *[Ver] TG verification:*
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP-HTTP for TCP
+| ... |
+| ... | - **[Cfg] DUT configuration:**
+| ... |
+| ... | - **[Ver] TG verification:**
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so

diff --git a/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_14_2-rps.robot b/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_14_2-rps.robot
index 71d2898..1ba2c4a 100644 (file)
--- a/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_14_2-rps.robot
+++ b/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_14_2-rps.robot
@@ -26,14 +26,18 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *TCP requests per seconds.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT-TG 2-node topology\
+| Documentation | **TCP requests per seconds.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT-TG 2-node topology \
 | ... | with single link between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP-HTTP for TCP
-| ... | *[Cfg] DUT configuration:*
-| ... | *[Ver] TG verification:*
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP-HTTP for TCP
+| ... |
+| ... | - **[Cfg] DUT configuration:**
+| ... |
+| ... | - **[Ver] TG verification:**
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so

diff --git a/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_15_0-cps.robot b/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_15_0-cps.robot
index a1cadd7..af2d734 100644 (file)
--- a/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_15_0-cps.robot
+++ b/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_15_0-cps.robot
@@ -26,14 +26,18 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *TCP requests per seconds.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT-TG 2-node topology\
+| Documentation | **TCP requests per seconds.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT-TG 2-node topology \
 | ... | with single link between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP-HTTP for TCP
-| ... | *[Cfg] DUT configuration:*
-| ... | *[Ver] TG verification:*
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP-HTTP for TCP
+| ... |
+| ... | - **[Cfg] DUT configuration:**
+| ... |
+| ... | - **[Ver] TG verification:**
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so

diff --git a/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_15_0-rps.robot b/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_15_0-rps.robot
index 9dfe2be..0b548fa 100644 (file)
--- a/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_15_0-rps.robot
+++ b/tests/vpp/perf/hoststack/2n1l-10ge2p1x710-eth-ip4tcphttp-ldpreload-nginx-1_15_0-rps.robot
@@ -26,14 +26,18 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *TCP requests per seconds.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT-TG 2-node topology\
+| Documentation | **TCP requests per seconds.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT-TG 2-node topology \
 | ... | with single link between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP-HTTP for TCP
-| ... | *[Cfg] DUT configuration:*
-| ... | *[Ver] TG verification:*
-| ... | *[Ref] Applicable standard specifications:*
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP-HTTP for TCP
+| ... |
+| ... | - **[Cfg] DUT configuration:**
+| ... |
+| ... | - **[Ver] TG verification:**
+| ... |
+| ... | - **[Ref] Applicable standard specifications:**
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot
index 8fc96ca..4d77100 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot
@@ -26,28 +26,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q test\
-| ... | cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. IEEE 802.1Q\
-| ... | tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and two static IPv4 /30 route entries. DUT1 and DUT2 tested\
-| ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are\
-| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\
-| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP\
-| ... | protocol=61 and static payload. MAC addresses are matching MAC\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. \
+| ... | IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and two static IPv4 /30 route entries. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are \
+| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \
+| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs IPv4 routing with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs IPv4 routing with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot
index 860e088..05dfe49 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot
@@ -26,26 +26,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 allowlist test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
-| ... | routing, two static IPv4 /24 routes and IPv4 ADL security allowlist
-| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG.
-| ... | DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput IPv4 allowlist test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4 \
+| ... | routing, two static IPv4 /24 routes and IPv4 ADL security allowlist \
+| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so
@@ -64,9 +69,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config. \
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot
index 374eb3d..fcc0b82 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot
@@ -26,26 +26,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 iAcl whitelist test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
-| ... | routing, two static IPv4 /24 routes and IPv4 iAcl security whitelist
-| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG.
-| ... | DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header
-| ... | and generated payload. MAC addresses are matching MAC addresses
+| Documentation | **RFC2544: Pkt throughput IPv4 iAcl whitelist test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4 \
+| ... | routing, two static IPv4 /24 routes and IPv4 iAcl security whitelist \
+| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | and generated payload. MAC addresses are matching MAC addresses \
 | ... | of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -64,9 +69,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot
index fad4d1c..0fe5751 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 policer test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
-| ... | routing and two static IPv4 /24 route entries and policer with 2R3C
-| ... | color-aware configuration. Policer is applied on links TG - DUT1 and
-| ... | DUT2 - TG. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header
-| ... | and generated payload. MAC addresses are matching MAC addresses
+| Documentation | **RFC2544: Pkt throughput IPv4 policer test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4 \
+| ... | routing and two static IPv4 /24 route entries and policer with 2R3C \
+| ... | color-aware configuration. Policer is applied on links TG - DUT1 and \
+| ... | DUT2 - TG. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | and generated payload. MAC addresses are matching MAC addresses \
 | ... | of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC2698.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -68,9 +73,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot
index 0907eb1..6161cef 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
-| ... | routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -64,9 +69,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot
index 0548f6f..cb9b486 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested\
-| ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +70,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-rnd-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-rnd-ndrpdr.robot
index 1e78503..f5f0f6d 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-rnd-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-rnd-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested\
-| ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 100k\
-| ... | flows per flow-group) with all packets containing Ethernet header,\
-| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 100k \
+| ... | flows per flow-group) with all packets containing Ethernet header, \
+| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +70,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot
index b0094d5..46a544b 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and 2x10k static IPv4 /32 route entries. DUT1 and DUT2 tested\
-| ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and 2x10k static IPv4 /32 route entries. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +70,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-rnd-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-rnd-ndrpdr.robot
index b2f0060..451bdf2 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-rnd-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-rnd-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and 2x10k static IPv4 /32 route entries. DUT1 and DUT2 tested\
-| ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 10k\
-| ... | flows per flow-group) with all packets containing Ethernet header,\
-| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and 2x10k static IPv4 /32 route entries. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 10k \
+| ... | flows per flow-group) with all packets containing Ethernet header, \
+| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +70,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot
index 4e7edfb..24be059 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and 2x1M static IPv4 /32 route entries. DUT1 and DUT2 tested\
-| ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and 2x1M static IPv4 /32 route entries. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +70,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-rnd-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-rnd-ndrpdr.robot
index f4af0dc..a593b32 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-rnd-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-rnd-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and 2x1M static IPv4 /32 route entries. DUT1 and DUT2 tested\
-| ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 1M\
-| ... | flows per flow-group) with all packets containing Ethernet header,\
-| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and 2x1M static IPv4 /32 route entries. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 1M \
+| ... | flows per flow-group) with all packets containing Ethernet header, \
+| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +70,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot
index 4863836..b68aa21 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot
index 8b5406c..62b3e6c 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot
index 6bf8cb4..625fae6 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot
index f7110b6..c8f646f 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot
index ca10e87..7d072e5 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot
index b526d72..fb9ac80 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot
index f8f4b14..e38db8e 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot
index 3908412..918ed65 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
index e7c22a5..d21045a 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -81,9 +86,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot
index d33403a..58271d3 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot
index 13a899f..a5d928e 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
index 3454d07..9ef49dc 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -81,9 +86,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot
index 917ec78..5d8d8d3 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot
index ec8019d..a11300c 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
index 0c1dd81..d3833e3 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -81,9 +86,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot
index f6c9126..603b512 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot
index 2d7ed83..fda09c4 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
index b2b846b..628c4aa 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -81,9 +86,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot
index 1f3a367..cef9a2b 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot
index 5dce28d..451ffec 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot
index ae7aabf..f52d043 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot
index e25baec..ba4cf48 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot
index 7bb646a..2c908cf 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot
index c51bba5..1a1bf0f 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot
index 5be5a27..f43f3cc 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot
index 39766da..b1d6c98 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot
index e3e6d22..912b63d 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot
index 2f279b2..fa83982 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot
index 49635a0..04bb321 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot
index 6c8b88e..f574196 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot
index b241461..4be9055 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot
index fdabe0d..40d37e6 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot
index 24b5c64..273b5e2 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot
index 0b72666..7a0ecc5 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot
index 102e838..3e6e119 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot
index a4f4458..01392e4 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
-| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and one static IPv4 /24 route entries. Required ACL rules are \
+| ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are \
+| ... | tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot
index 2b2d94b..b844840 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot
@@ -26,27 +26,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q test\
-| ... | cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. IEEE 802.1Q\
-| ... | tagging is applied on link between DUT1-if2 and TG-if2.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | two static IPv4 /30 route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are\
-| ... | generated by TG on links to DUT1. TG traffic profile contains two L3\
-| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP\
-| ... | protocol=61 and static payload. MAC addresses are matching MAC\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q test \
+| ... | cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. \
+| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and two static IPv4 /30 route entries. DUT1 is tested with \
+| ... | ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are \
+| ... | generated by TG on links to DUT1. TG traffic profile contains two L3 \
+| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs IPv4 routing with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs IPv4 routing with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot
index d8f85a2..478f7d9 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot
@@ -26,26 +26,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 allowlist test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 allowlist test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
-| ... | routing, two static IPv4 /24 routes and IPv4 ADL security allowlist
-| ... | ingress /24 filter entries applied on links TG - DUT1.
-| ... | DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing, two static IPv4 /24 routes and IPv4 ADL security allowlist \
+| ... | ingress /24 filter entries applied on links TG - DUT1. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so
@@ -64,9 +69,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config. \
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot
index 2f6021e..c2a790a 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot
@@ -26,26 +26,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 iAcl whitelist test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 iAcl whitelist test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4
-| ... | routing, two static IPv4 /24 routes and IPv4 iAcl security whitelist
-| ... | ingress /24 filter entries applied on links TG - DUT1.
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header
-| ... | and generated payload. MAC addresses are matching MAC addresses
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing, two static IPv4 /24 routes and IPv4 iAcl security whitelist \
+| ... | ingress /24 filter entries applied on links TG - DUT1. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | and generated payload. MAC addresses are matching MAC addresses \
 | ... | of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -64,9 +69,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot
index 867026f..3603125 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot
@@ -26,25 +26,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 policer test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput IPv4 policer test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | two IPv4 ARP entries and policer with 2R3C color-aware configuration.\
-| ... | Policer is applied on links TG - DUT1. DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header\
-| ... | and generated payload. MAC addresses are matching MAC addresses\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and two IPv4 ARP entries and policer with 2R3C color-aware \
+| ... | configuration. Policer is applied on links TG - DUT1. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | and generated payload. MAC addresses are matching MAC addresses \
 | ... | of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC2698.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -66,9 +72,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot
index 8248487..4679b9b 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with
-| ... | ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -63,9 +68,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot
index 212e8d8..a894529 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot
@@ -26,24 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | 2x100k static IPv4 /32 route entries. DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and 2x100k static IPv4 /32 route entries. DUT1 is tested with \
+| ... | ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -64,9 +70,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-rnd-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-rnd-ndrpdr.robot
index 4f3d56c..f7ce70c 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-rnd-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-rnd-ndrpdr.robot
@@ -27,24 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | 2x100k static IPv4 /32 route entries. DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 100k\
-| ... | flows per flow-group) with all packets containing Ethernet header,\
-| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and 2x100k static IPv4 /32 route entries. DUT1 is tested with \
+| ... | ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 100k \
+| ... | flows per flow-group) with all packets containing Ethernet header, \
+| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +71,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot
index 8bcec57..27cc66a 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot
@@ -26,24 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | 2x10k static IPv4 /32 route entries. DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
-| ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and 2x10k static IPv4 /32 route entries. DUT1 is tested with \
+| ... | ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic \
+| ... | profile contains two L3 flow-groups (flow-group per direction, \
+| ... | 10k flows per flow-group) with all packets containing Ethernet header, \
+| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are \
+| ... | matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -64,9 +70,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-rnd-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-rnd-ndrpdr.robot
index 7e8fe1d..d900f5f 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-rnd-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-rnd-ndrpdr.robot
@@ -27,24 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | 2x10k static IPv4 /32 route entries. DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 10k\
-| ... | flows per flow-group) with all packets containing Ethernet header,\
-| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and 2x10k static IPv4 /32 route entries. DUT1 is tested with \
+| ... | ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 10k \
+| ... | flows per flow-group) with all packets containing Ethernet header, \
+| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +71,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot
index 147578e..f320398 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot
@@ -26,24 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | 2x1M static IPv4 /32 route entries. DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and 2x1M static IPv4 /32 route entries. DUT1 is tested with \
+| ... | ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -64,9 +70,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-rnd-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-rnd-ndrpdr.robot
index 91ed07a..ffab0d3 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-rnd-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-rnd-ndrpdr.robot
@@ -27,25 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | 2x1M static IPv4 /32 route entries. DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 1M\
-| ... | flows per flow-group) with all packets containing Ethernet header,\
-| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and 2x1M static IPv4 /32 route entries. DUT1 is tested with \
+| ... | ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains 2 randomized L3 flow-groups (flow-group per direction, 1M \
+| ... | flows per flow-group) with all packets containing Ethernet header, \
+| ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -66,9 +71,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-cps-ndrpdr.robot
index 0ee5108..7631571 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-cps-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty TCP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **CPS on empty TCP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with TCP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with TCP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot
index 813d029..276e71d 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight TCP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **PPS on lightweight TCP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, TCP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-cps-ndrpdr.robot
index 2935fe5..13bf271 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-cps-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty TCP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **CPS on empty TCP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with TCP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with TCP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot
index 0968ecd..3765ee6 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight TCP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **PPS on lightweight TCP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, TCP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-cps-ndrpdr.robot
index 8644121..c61412a 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-cps-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty TCP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **CPS on empty TCP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with TCP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with TCP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot
index 320333d..b126444 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight TCP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **PPS on lightweight TCP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, TCP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-cps-ndrpdr.robot
index 518f3ce..92300bd 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-cps-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty TCP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **CPS on empty TCP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with TCP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with TCP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot
index 48f9498..6b6cf17 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight TCP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **PPS on lightweight TCP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, TCP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-cps-ndrpdr.robot
index 1c0ba55..b9f4ff5 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-cps-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty TCP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **CPS on empty TCP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with TCP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with TCP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot
index 530292c..8d2f9de 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight TCP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **PPS on lightweight TCP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, TCP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-cps-ndrpdr.robot
index ffae929..824cc6f 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-cps-ndrpdr.robot
@@ -29,26 +29,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty TCP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **CPS on empty TCP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and
-| ... | one static IPv4 /18 route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /18 route entries. \
 | ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with TCP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with TCP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\
-| ... | for Network Security Device Performance\
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** Benchmarking \
+| ... | Methodology for Network Security Device Performance \
 | ... | (draft-ietf-bmwg-ngfw-performance-03).
 
 *** Variables ***
@@ -96,9 +101,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot
index 76b8597..e2f1ab3 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight TCP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **PPS on lightweight TCP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, TCP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -89,9 +95,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot
index 811ba0d..964eac7 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *TPUT on lightweight TCP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **TPUT on lightweight TCP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, TCP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -91,9 +97,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-cps-ndrpdr.robot
index 60544c3..f85f6e1 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-cps-ndrpdr.robot
@@ -29,26 +29,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty TCP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **CPS on empty TCP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | one static IPv4 /18 route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /18 route entries. \
 | ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with TCP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with TCP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\
-| ... | for Network Security Device Performance\
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** Benchmarking \
+| ... | Methodology for Network Security Device Performance \
 | ... | (draft-ietf-bmwg-ngfw-performance-03).
 
 *** Variables ***
@@ -96,9 +101,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot
index 69a915f..08cb4ed 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight TCP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **PPS on lightweight TCP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, TCP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -89,9 +95,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot
index 1a044f9..edc2629 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *TPUT on lightweight TCP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **TPUT on lightweight TCP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, TCP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -91,9 +97,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-cps-ndrpdr.robot
index 32862ad..5372b2e 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-cps-ndrpdr.robot
@@ -29,26 +29,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty TCP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **CPS on empty TCP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | one static IPv4 /18 route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /18 route entries. \
 | ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with TCP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with TCP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\
-| ... | for Network Security Device Performance\
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** Benchmarking \
+| ... | Methodology for Network Security Device Performance \
 | ... | (draft-ietf-bmwg-ngfw-performance-03).
 
 *** Variables ***
@@ -98,9 +103,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot
index 3970764..7b7ebc8 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight TCP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **PPS on lightweight TCP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, TCP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -91,9 +97,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot
index 4ff9ade..8154b1d 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *TPUT on lightweight TCP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **TPUT on lightweight TCP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, TCP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -93,9 +99,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-cps-ndrpdr.robot
index 905ded6..c3aa83e 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-cps-ndrpdr.robot
@@ -29,26 +29,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty TCP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **CPS on empty TCP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | one static IPv4 /18 route entries.\
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with TCP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /18 route entries. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with TCP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\
-| ... | for Network Security Device Performance\
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** Benchmarking \
+| ... | Methodology for Network Security Device Performance \
 | ... | (draft-ietf-bmwg-ngfw-performance-03).
 
 *** Variables ***
@@ -96,9 +101,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot
index 954d6db..b9a4c49 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight TCP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **PPS on lightweight TCP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, TCP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -89,9 +95,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot
index 6c7b82f..927ba9b 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *TPUT on lightweight TCP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **TPUT on lightweight TCP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, TCP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -91,9 +97,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-cps-ndrpdr.robot
index bd6cd1f..5399ff7 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-cps-ndrpdr.robot
@@ -29,26 +29,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty TCP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **CPS on empty TCP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | one static IPv4 /18 route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /18 route entries. \
 | ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with TCP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with TCP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\
-| ... | for Network Security Device Performance\
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** Benchmarking \
+| ... | Methodology for Network Security Device Performance \
 | ... | (draft-ietf-bmwg-ngfw-performance-03).
 
 *** Variables ***
@@ -98,9 +103,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot
index b021cf8..691c320 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight TCP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **PPS on lightweight TCP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, TCP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -91,9 +97,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot
index 6703fdf..7011470 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *TPUT on lightweight TCP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **TPUT on lightweight TCP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, TCP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, TCP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -93,9 +99,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-cps-ndrpdr.robot
index 041cf52..1785cd0 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-cps-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty UDP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **CPS on empty UDP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4
-| ... | routing and two static IPv4 /22 route entries. DUT1 tested with
-| ... | ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /22 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with UDP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -69,9 +74,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot
index 7183c48..c72f66e 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot
@@ -27,24 +27,29 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight UDP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **PPS on lightweight UDP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /22 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, UDP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /22 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, UDP header and static \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-cps-ndrpdr.robot
index 35a047d..bf1c6d9 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-cps-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty UDP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **CPS on empty UDP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4
-| ... | routing and two static IPv4 /18 route entries. DUT1 tested with
-| ... | ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /18 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with UDP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -69,9 +74,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot
index 3e02d65..5491205 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *PPS on lightweight UDP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **PPS on lightweight UDP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4
-| ... | routing and two static IPv4 /18 route entries. DUT1 tested with
-| ... | ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /18 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-cps-ndrpdr.robot
index a6be499..96baa98 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-cps-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty UDP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **CPS on empty UDP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4
-| ... | routing and two static IPv4 /14 route entries. DUT1 tested with
-| ... | ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /14 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with UDP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -69,9 +74,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot
index ac2063d..63e19b3 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *PPS on lightweight UDP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **PPS on lightweight UDP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4
-| ... | routing and two static IPv4 /14 route entries. DUT1 tested with
-| ... | ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /14 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-cps-ndrpdr.robot
index a09262a..0e94b88 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-cps-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty UDP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **CPS on empty UDP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4
-| ... | routing and two static IPv4 /20 route entries. DUT1 tested with
-| ... | ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /20 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with UDP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -69,9 +74,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot
index 61039c5..8bb7dda 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *PPS on lightweight UDP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **PPS on lightweight UDP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4
-| ... | routing and two static IPv4 /20 route entries. DUT1 tested with
-| ... | ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /20 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-cps-ndrpdr.robot
index 2909203..0219061 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-cps-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty UDP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **CPS on empty UDP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4
-| ... | routing and two static IPv4 /16 route entries. DUT1 tested with
-| ... | ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /16 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with UDP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -69,9 +74,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot
index 8b52279..e7135a7 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *PPS on lightweight UDP transactions with IPv4 routing*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **PPS on lightweight UDP transactions with IPv4 routing**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4
-| ... | routing and two static IPv4 /16 route entries. DUT1 tested with
-| ... | ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /16 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
index 1e4ceb9..4ac0c39 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
@@ -27,25 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
index 9f767f3..2168192 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
@@ -27,25 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
index 426f136..4f01fab 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
@@ -27,25 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
index 55f69d0..7a3060b 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
@@ -27,25 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot
index 0e4ea8e..91a3ef5 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot
@@ -27,25 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot
index 3e03e63..2bf5f7d 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot
@@ -27,25 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput IPv4 test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\
-| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static payload. MAC addresses are\
-| ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, \
+| ... | ${flows_per_dir} flows per flow-group) with all packets containing \
+| ... | Ethernet header, IPv4 header with IP protocol=61 and static payload. \
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +85,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p1-s1-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p1-s1-ndrpdr.robot
index fdd8be3..a075aa0 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p1-s1-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p1-s1-ndrpdr.robot
@@ -29,26 +29,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput NAT44 deterministic mode performance
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput NAT44 deterministic mode performance
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and
-| ... | one static IPv4 /18 route entries.
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /18 route entries. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | det44_plugin.so
@@ -92,9 +97,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1024-p63-s64512-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1024-p63-s64512-ndrpdr.robot
index 6310ea9..8ceac80 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1024-p63-s64512-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h1024-p63-s64512-ndrpdr.robot
@@ -27,25 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput NAT44 performance test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | two static IPv4 /22 and IPv4 /24 route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and two static IPv4 /22 and IPv4 /24 route entries. \
 | ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with UDP header and static payload. MAC addresses are matching MAC\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with UDP header and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | det44_plugin.so
@@ -89,9 +94,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h16384-p63-s1032192-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h16384-p63-s1032192-ndrpdr.robot
index 65408c4..c96dd4d 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h16384-p63-s1032192-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h16384-p63-s1032192-ndrpdr.robot
@@ -27,25 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput NAT44 performance test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | two static IPv4 /18 and IPv4 /24 route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and two static IPv4 /18 and IPv4 /24 route entries. \
 | ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with UDP header and static payload. MAC addresses are matching MAC\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with UDP header and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | det44_plugin.so
@@ -89,9 +94,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h262144-p63-s16515072-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h262144-p63-s16515072-ndrpdr.robot
index 928c53c..d9e0325 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h262144-p63-s16515072-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h262144-p63-s16515072-ndrpdr.robot
@@ -27,25 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput NAT44 performance test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | two static IPv4 /14 and IPv4 /24 route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and two static IPv4 /14 and IPv4 /24 route entries. \
 | ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with UDP header and static payload. MAC addresses are matching MAC\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with UDP header and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | det44_plugin.so
@@ -91,9 +96,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h4096-p63-s258048-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h4096-p63-s258048-ndrpdr.robot
index a3a405f..97307e8 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h4096-p63-s258048-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h4096-p63-s258048-ndrpdr.robot
@@ -27,25 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput NAT44 performance test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | two static IPv4 /20 and IPv4 /24 route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and two static IPv4 /20 and IPv4 /24 route entries. \
 | ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with UDP header and static payload. MAC addresses are matching MAC\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with UDP header and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | det44_plugin.so
@@ -89,9 +94,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h65536-p63-s4128758-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h65536-p63-s4128758-ndrpdr.robot
index ee1ec3a..1eaadfc 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h65536-p63-s4128758-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44det-h65536-p63-s4128758-ndrpdr.robot
@@ -27,25 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput NAT44 performance test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | two static IPv4 /16 and IPv4 /24 route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and two static IPv4 /16 and IPv4 /24 route entries. \
 | ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with UDP header and static payload. MAC addresses are matching MAC\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with UDP header and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | det44_plugin.so
@@ -91,9 +96,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-cps-ndrpdr.robot
index 2048e5a..bfcefa0 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-cps-ndrpdr.robot
@@ -29,26 +29,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty UDP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **CPS on empty UDP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and
-| ... | one static IPv4 /${dest_mask} route entries.
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /${dest_mask} route entries. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with UDP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\
-| ... | for Network Security Device Performance\
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** Benchmarking \
+| ... | Methodology for Network Security Device Performance \
 | ... | (draft-ietf-bmwg-ngfw-performance-03).
 
 *** Variables ***
@@ -94,9 +99,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot
index f54c5f1..1efffef 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot
@@ -27,24 +27,29 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight UDP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **PPS on lightweight UDP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, UDP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, UDP header and static \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -89,9 +94,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot
index 85f4f0d..39e5d24 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot
@@ -27,24 +27,29 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *TPUT on lightweight UDP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **TPUT on lightweight UDP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, UDP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, UDP header and static \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -91,9 +96,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-udir-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-udir-ndrpdr.robot
index 73eb6b6..0535f00 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-udir-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-udir-ndrpdr.robot
@@ -27,27 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput NAT44 endpoint-dependent mode
-| ... | performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput NAT44 endpoint-dependent mode
+| ... | performance test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | one static IPv4 /${dest_mask} route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /${dest_mask} route entries. \
 | ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L4 flows (uni-directional UDP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L4 flows (uni-directional UDP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with UDP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\
-| ... | for Network Security Device Performance\
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** Benchmarking \
+| ... | Methodology for Network Security Device Performance \
 | ... | (draft-ietf-bmwg-ngfw-performance-03).
 
 *** Variables ***
@@ -94,9 +99,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-cps-ndrpdr.robot
index 8e43f22..c58c731 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-cps-ndrpdr.robot
@@ -29,26 +29,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty UDP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **CPS on empty UDP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and
-| ... | one static IPv4 /${dest_mask} route entries.
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /${dest_mask} route entries. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with UDP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\
-| ... | for Network Security Device Performance\
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** Benchmarking \
+| ... | Methodology for Network Security Device Performance \
 | ... | (draft-ietf-bmwg-ngfw-performance-03).
 
 *** Variables ***
@@ -94,9 +99,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot
index 9313395..35852dc 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot
@@ -27,24 +27,29 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight UDP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **PPS on lightweight UDP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, UDP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, UDP header and static \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -89,9 +94,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot
index e215e01..9aa2358 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *TPUT on lightweight UDP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **TPUT on lightweight UDP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, UDP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, UDP header and static \
+| ... | payload. \ \ \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -91,9 +97,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-udir-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-udir-ndrpdr.robot
index 3fb7d39..ab474a0 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-udir-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-udir-ndrpdr.robot
@@ -27,27 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput NAT44 endpoint-dependent mode
-| ... | performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput NAT44 endpoint-dependent mode
+| ... | performance test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | one static IPv4 /${dest_mask} route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /${dest_mask} route entries. \
 | ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L4 flows (un-directional UDP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L4 flows (un-directional UDP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with UDP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\
-| ... | for Network Security Device Performance\
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** Benchmarking \
+| ... | Methodology for Network Security Device Performance \
 | ... | (draft-ietf-bmwg-ngfw-performance-03).
 
 *** Variables ***
@@ -94,9 +99,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-cps-ndrpdr.robot
index f872364..f8e930f 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-cps-ndrpdr.robot
@@ -29,26 +29,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty UDP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **CPS on empty UDP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and
-| ... | one static IPv4 /${dest_mask} route entries.
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /${dest_mask} route entries. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with UDP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\
-| ... | for Network Security Device Performance\
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** Benchmarking \
+| ... | Methodology for Network Security Device Performance \
 | ... | (draft-ietf-bmwg-ngfw-performance-03).
 
 *** Variables ***
@@ -96,9 +101,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot
index 9aecd78..b2f95d7 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot
@@ -27,24 +27,29 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight UDP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **PPS on lightweight UDP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, UDP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, UDP header and static \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -91,9 +96,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot
index 72fa285..b1dbdfa 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *TPUT on lightweight UDP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **TPUT on lightweight UDP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, UDP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, UDP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -94,9 +100,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-udir-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-udir-ndrpdr.robot
index 6a3e8b4..77d52ab 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-udir-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-udir-ndrpdr.robot
@@ -27,27 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput NAT44 endpoint-dependent mode
-| ... | performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput NAT44 endpoint-dependent mode
+| ... | performance test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | one static IPv4 /${dest_mask} route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /${dest_mask} route entries. \
 | ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L4 flows (uni-directional UDP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L4 flows (uni-directional UDP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with UDP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\
-| ... | for Network Security Device Performance\
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** Benchmarking \
+| ... | Methodology for Network Security Device Performance \
 | ... | (draft-ietf-bmwg-ngfw-performance-03).
 
 *** Variables ***
@@ -96,9 +101,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-cps-ndrpdr.robot
index 1f920a9..33c8ca9 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-cps-ndrpdr.robot
@@ -29,26 +29,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty UDP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **CPS on empty UDP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and
-| ... | one static IPv4 /${dest_mask} route entries.
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /${dest_mask} route entries. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with UDP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\
-| ... | for Network Security Device Performance\
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** Benchmarking \
+| ... | Methodology for Network Security Device Performance \
 | ... | (draft-ietf-bmwg-ngfw-performance-03).
 
 *** Variables ***
@@ -94,9 +99,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot
index 3125c5c..7d71793 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight UDP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **PPS on lightweight UDP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, UDP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, UDP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -89,9 +95,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot
index 19414c9..d76e7e5 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot
@@ -27,24 +27,30 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *TPUT on lightweight UDP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **TPUT on lightweight UDP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, UDP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, UDP header and static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -91,9 +97,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-udir-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-udir-ndrpdr.robot
index c391df4..586188c 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-udir-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-udir-ndrpdr.robot
@@ -27,27 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput NAT44 endpoint-dependent mode
-| ... | performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput NAT44 endpoint-dependent mode
+| ... | performance test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | one static IPv4 /${dest_mask} route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /${dest_mask} route entries. \
 | ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L4 flows (uni-directional UDP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L4 flows (uni-directional UDP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with UDP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\
-| ... | for Network Security Device Performance\
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** Benchmarking \
+| ... | Methodology for Network Security Device Performance \
 | ... | (draft-ietf-bmwg-ngfw-performance-03).
 
 *** Variables ***
@@ -94,9 +99,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-cps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-cps-ndrpdr.robot
index 8c29bcf..e6a2a95 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-cps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-cps-ndrpdr.robot
@@ -29,26 +29,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *CPS on empty UDP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **CPS on empty UDP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and
-| ... | one static IPv4 /${dest_mask} route entries.
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /${dest_mask} route entries. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with UDP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\
-| ... | for Network Security Device Performance\
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** Benchmarking \
+| ... | Methodology for Network Security Device Performance \
 | ... | (draft-ietf-bmwg-ngfw-performance-03).
 
 *** Variables ***
@@ -96,9 +101,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot
index 0fd0bec..383c9eb 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot
@@ -27,24 +27,29 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *PPS on lightweight UDP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **PPS on lightweight UDP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, UDP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, UDP header and static \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -91,9 +96,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot
index f4c4430..a743ad1 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot
@@ -27,24 +27,29 @@
 | Test Template | Local Template
 |
 | # TODO CSIT-1765: Unify suite Documentation.
-| Documentation | *TPUT on lightweight UDP transactions with NAT44ED*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **TPUT on lightweight UDP transactions with NAT44ED**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4\
-| ... | routing and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains client and server ASTF programs, generating packets containing\
-| ... | Ethernet header, IPv4 header, UDP header and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains client and server ASTF programs, generating packets \
+| ... | containing Ethernet header, IPv4 header, UDP header and static \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
@@ -93,9 +98,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.\
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-udir-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-udir-ndrpdr.robot
index 019ac77..6776ad5 100644 (file)
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-udir-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-udir-ndrpdr.robot
@@ -27,27 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput NAT44 endpoint-dependent mode
-| ... | performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput NAT44 endpoint-dependent mode
+| ... | performance test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | one static IPv4 /${dest_mask} route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /${dest_mask} route entries. \
 | ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L4 flows (uni-directional UDP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L4 flows (uni-directional UDP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with UDP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\
-| ... | for Network Security Device Performance\
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** Benchmarking \
+| ... | Methodology for Network Security Device Performance \
 | ... | (draft-ietf-bmwg-ngfw-performance-03).
 
 *** Variables ***
@@ -96,9 +101,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot
index 1f650bc..34b6170 100644 (file)
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot
@@ -27,27 +27,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\
+| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q and \
+| ... | VXLANoIPv4 test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-Dot1Q-IPv4 for L2 switching of \
+| ... | IPv4. \
 | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 100 L2\
-| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\
-| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\
-| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\
-| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with 100 \
+| ... | L2 \
+| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and \
+| ... | DUT2. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k \
+| ... | flows per flow-group) with all packets containing Ethernet header, \
+| ... | IEEE \
+| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -69,9 +77,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\
-| | ... | uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VLAN and \
+| | ... | VXLAN and uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot
index cf08ca9..22021e1 100644 (file)
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\
+| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q and \
+| ... | VXLANoIPv4 test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-Dot1Q-IPv4 for L2 switching of \
+| ... | IPv4. \
 | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 10 L2\
-| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\
-| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\
-| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\
-| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with 10 L2 \
+| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and \
+| ... | DUT2. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k \
+| ... | flows per flow-group) with all packets containing Ethernet header, \
+| ... | IEEE \
+| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -69,9 +76,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\
-| | ... | uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VLAN and \
+| | ... | VXLAN and uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot
index 37de1ec..0705023 100644 (file)
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\
+| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q and \
+| ... | VXLANoIPv4 test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-Dot1Q-IPv4 for L2 switching of \
+| ... | IPv4. \
 | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 1k L2\
-| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\
-| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\
-| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\
-| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with 1k L2 \
+| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and \
+| ... | DUT2. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k \
+| ... | flows per flow-group) with all packets containing Ethernet header, \
+| ... | IEEE \
+| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -68,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\
-| | ... | uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VLAN and \
+| | ... | VXLAN and uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot
index 47f9da8..ed036a3 100644 (file)
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\
+| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q and \
+| ... | VXLANoIPv4 test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-Dot1Q-IPv4 for L2 switching of \
+| ... | IPv4. \
 | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 1 L2\
-| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\
-| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\
-| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\
-| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with 1 L2 \
+| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and \
+| ... | DUT2. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k \
+| ... | flows per flow-group) with all packets containing Ethernet header, \
+| ... | IEEE \
+| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -68,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\
-| | ... | uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VLAN and \
+| | ... | VXLAN and uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4gtpusw-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4gtpusw-ip4base-ndrpdr.robot
index 0c4d5b3..743a2ec 100644 (file)
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4gtpusw-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4gtpusw-ip4base-ndrpdr.robot
@@ -27,25 +27,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput gtpu test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-GTPU on DUT1-DUT2,\
+| Documentation | **RFC2544: Pkt throughput gtpu test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-GTPU on DUT1-DUT2, \
 | ... | Eth-IPv4 on TG-DUTn for IPv4 routing over GTPU tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and static routes. GTPU tunnel is configured between DUT1\
-| ... | and DUT2. DUT1 and DUT2 tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups with all packets containing Ethernet\
-| ... | header, IPv4 header with IP protocol=61 and static payload. MAC\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and static routes. GTPU tunnel is configured between DUT1 \
+| ... | and DUT2. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups with all packets containing Ethernet \
+| ... | header, IPv4 header with IP protocol=61 and static payload. MAC \
 | ... | addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | gtpu_plugin.so
@@ -65,9 +70,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs Gtpu hw offload routing config.\
+| | ... | - **[Cfg]** DUT runs Gtpu hw offload routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot
index ba594f7..687e3e1 100644 (file)
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot
@@ -30,26 +30,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput Lisp test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4 on DUT1-DUT2,\
+| Documentation | **RFC2544: Pkt throughput Lisp test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv4 on DUT1-DUT2, \
 | ... | Eth-IPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and static routes. LISPoIPv4 tunnel is configured between DUT1\
-| ... | and DUT2. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and static routes. LISPoIPv4 tunnel is configured between DUT1 \
+| ... | and DUT2. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
 | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC6830.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
@@ -68,10 +73,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters\
-| | ... | config.
+| | ... | - **[Cfg]** DUT runs IPv4 LISP remote static mappings and whitelist \
+| | ... | filters config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot
index 32e270a..3b74615 100644 (file)
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot
@@ -30,26 +30,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput Lisp test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv6 on DUT1-DUT2,\
+| Documentation | **RFC2544: Pkt throughput Lisp test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv6 on DUT1-DUT2, \
 | ... | Eth-IPv4 on TG-DUTn for IPv4 routing over LISPoIPv6 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and static routes. LISPoIPv6 tunnel is configured between DUT1\
-| ... | and DUT2. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
+| ... | routing and static routes. LISPoIPv6 tunnel is configured between DUT1 \
+| ... | and DUT2. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
 | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC6830.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
@@ -68,10 +73,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters\
-| | ... | config.
+| | ... | - **[Cfg]** DUT runs IPv6 LISP remote static mappings and whitelist \
+| | ... | filters config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot
index b1692c7..3b2bd80 100644 (file)
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot
@@ -27,26 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4 on\
+| Documentation | **RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4 \
+| ... | on \
 | ... | TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\
-| ... | domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2.\
-| ... | DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 
+| ... | bridge-\
+| ... | domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +72,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD forwarding config with VXLAN and uses\
+| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VXLAN and uses \
 | | ... | ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot
index f540c9c..5a94a7b 100644 (file)
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot
@@ -27,26 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross-connect on TG-DUTn.
-| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
-| ... | connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2.
-| ... | DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| Documentation | **RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross-connect on \
+| ... | TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between \
+| ... | DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 \
+| ... | and DUT2. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
 | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +71,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC forwarding config.
+| | ... | - **[Cfg]** DUT runs L2XC forwarding config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1024tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1024tun-ip4base-ndrpdr.robot
index e8c12d3..e102e84 100644 (file)
--- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1024tun-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1024tun-ip4base-ndrpdr.robot
@@ -28,29 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\
-| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\
-| ... | routing over GENEVE tunnels.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\
-| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \
+| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \
+| ... | for IPv4 routing over GENEVE tunnels.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \
+| ... | IPv4 /24 \
 | ... | route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768,
-| ... | RFC8926.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \
+| ... | RFC768 and RFC8926.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so
@@ -81,9 +87,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration.
+| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-16tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-16tun-ip4base-ndrpdr.robot
index 68ac42d..e99117b 100644 (file)
--- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-16tun-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-16tun-ip4base-ndrpdr.robot
@@ -28,29 +28,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\
-| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\
-| ... | routing over GENEVE tunnels.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\
-| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\
-| ... | route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \
+| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \
+| ... | for IPv4 routing over GENEVE tunnels.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \
+| ... | IPv4 /24 route entries. DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768,
-| ... | RFC8926.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \
+| ... | RFC768 and RFC8926.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so
@@ -81,9 +86,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration.
+| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-ndrpdr.robot
index 291fb98..f0624a2 100644 (file)
--- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-ndrpdr.robot
@@ -28,29 +28,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\
-| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\
-| ... | routing over GENEVE tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\
-| ... | GENEVE tunnel and 4 static IPv4 /24 route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \
+| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \
+| ... | for IPv4 routing over GENEVE tunnel.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | over GENEVE tunnel and 4 static IPv4 /24 route entries. \
 | ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768,
-| ... | RFC8926.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \
+| ... | RFC768 and RFC8926.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so
@@ -81,9 +86,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration.
+| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-256tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-256tun-ip4base-ndrpdr.robot
index 00b5db7..aae9332 100644 (file)
--- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-256tun-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-256tun-ip4base-ndrpdr.robot
@@ -28,29 +28,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\
-| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\
-| ... | routing over GENEVE tunnels.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\
-| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\
-| ... | route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \
+| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \
+| ... | for IPv4 routing over GENEVE tunnels.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \
+| ... | IPv4 /24 route entries. DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768,
-| ... | RFC8926.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \
+| ... | RFC768 and RFC8926.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so
@@ -81,9 +86,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration.
+| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-4tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-4tun-ip4base-ndrpdr.robot
index 63d70d7..4d9cd4f 100644 (file)
--- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-4tun-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-4tun-ip4base-ndrpdr.robot
@@ -28,29 +28,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\
-| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\
-| ... | routing over GENEVE tunnels.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\
-| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\
-| ... | route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \
+| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \
+| ... | for IPv4 routing over GENEVE tunnels.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \
+| ... | IPv4 /24 route entries. DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768,
-| ... | RFC8926.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \
+| ... | RFC768 and RFC8926.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so
@@ -81,9 +86,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration.
+| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-64tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-64tun-ip4base-ndrpdr.robot
index de057a2..d4ad891 100644 (file)
--- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-64tun-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-64tun-ip4base-ndrpdr.robot
@@ -28,29 +28,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance
-| ... | test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\
-| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\
-| ... | routing over GENEVE tunnels.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\
-| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\
-| ... | route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \
+| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \
+| ... | for IPv4 routing over GENEVE tunnels.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \
+| ... | IPv4 /24 route entries. DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768,
-| ... | RFC8926.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \
+| ... | RFC768 and RFC8926.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so
@@ -81,9 +86,9 @@
 | Local Template
 | |
 | | [Documentation]
-| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration.
+| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot
index b134dfd..6014571 100644 (file)
--- a/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot
@@ -26,28 +26,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 routing with IEEE 802.1Q test
-| ... | cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. IEEE 802.1Q\
-| ... | tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and two static IPv6 /64 route entries. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are\
-| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\
-| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv6 header with IP\
-| ... | protocol=61 and static payload. MAC addresses are matching MAC\
+| Documentation | **RFC2544: Pkt throughput IPv6 routing with IEEE 802.1Q \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. \
+| ... | IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and two static IPv6 /64 route entries. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are \
+| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \
+| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv6 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs IPv6 routing with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs IPv6 routing with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot
index 63dceac..d764614 100644 (file)
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot
@@ -26,27 +26,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 allowlist test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6
-| ... | routing, two static IPv6 /64 routes and IPv6 ADL security allowlist
-| ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG.
-| ... | DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv6 header and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| Documentation | **RFC2544: Pkt throughput IPv6 allowlist test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing, two static IPv6 /64 routes and IPv6 ADL security allowlist \
+| ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. \
+| ... | DUT1 and DUT2 tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv6 header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so
@@ -65,9 +70,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing and allowlist filters config with
+| | ... | - **[Cfg]** DUT runs IPv6 routing and allowlist filters config with \
 | | ... | ${phy_cores} phy core(s).
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot
index 80eb55f..598c265 100644 (file)
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot
@@ -26,26 +26,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 iAcl whitelist test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6
-| ... | routing, two static IPv6 /64 routes and IPv6 iAcl security whitelist
-| ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG.
-| ... | DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv6 header and generated payload. MAC
+| Documentation | **RFC2544: Pkt throughput IPv6 iAcl whitelist test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing, two static IPv6 /64 routes and IPv6 iAcl security whitelist \
+| ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. \
+| ... | DUT1 and DUT2 tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv6 header and generated payload. MAC \
 | ... | addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -64,9 +69,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with
+| | ... | - **[Cfg]** DUT runs IPv6 routing and whitelist filters config with \
 | | ... | ${phy_cores} phy core(s).
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot
index 8de0d66..41e9018 100644 (file)
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and two static IPv6 /64 route entries. DUT1 and DUT2\
+| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and two static IPv6 /64 route entries. DUT1 and DUT2 \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG. \
+| ... | on links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv6 header and static payload. MAC \
+| ... | addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -63,9 +68,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config.
+| | ... | - **[Cfg]** DUT runs IPv6 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
index ee94abf..42d79e4 100644 (file)
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
@@ -26,26 +26,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested\
+| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested \
 | ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header\
-| ... | with IP and static payload. MAC addresses are matching MAC addresses\
-| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | with IP and static payload. MAC addresses are matching MAC addresses \
+| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination \
 | ... | address) field is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +70,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config.
+| | ... | - **[Cfg]** DUT runs IPv6 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-rnd-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-rnd-ndrpdr.robot
index 244a68b..dfd5644 100644 (file)
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-rnd-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-rnd-ndrpdr.robot
@@ -26,26 +26,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested\
+| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested \
 | ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header\
-| ... | with IP and static payload. MAC addresses are matching MAC addresses\
-| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | with IP and static payload. MAC addresses are matching MAC addresses \
+| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination \
 | ... | address) field is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +70,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config.
+| | ... | - **[Cfg]** DUT runs IPv6 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
index 0892386..33a1a7b 100644 (file)
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
@@ -26,26 +26,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested\
+| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested \
 | ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header\
-| ... | with IP and static payload. MAC addresses are matching MAC addresses\
-| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | with IP and static payload. MAC addresses are matching MAC addresses \
+| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination \
 | ... | address) field is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +70,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config.
+| | ... | - **[Cfg]** DUT runs IPv6 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-rnd-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-rnd-ndrpdr.robot
index b77f6fa..83dae86 100644 (file)
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-rnd-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-rnd-ndrpdr.robot
@@ -26,26 +26,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested\
+| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested \
 | ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header\
-| ... | with IP and static payload. MAC addresses are matching MAC addresses\
-| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | with IP and static payload. MAC addresses are matching MAC addresses \
+| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination \
 | ... | address) field is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +70,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config.
+| | ... | - **[Cfg]** DUT runs IPv6 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
index d470a26..60ad967 100644 (file)
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
@@ -26,26 +26,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested\
+| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested \
 | ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header\
-| ... | with IP and static payload. MAC addresses are matching MAC addresses\
-| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | with IP and static payload. MAC addresses are matching MAC addresses \
+| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination \
 | ... | address) field is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +70,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv6 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-rnd-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-rnd-ndrpdr.robot
index 5691c8f..e75a766 100644 (file)
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-rnd-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-rnd-ndrpdr.robot
@@ -26,26 +26,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested\
+| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested \
 | ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header\
-| ... | with IP and static payload. MAC addresses are matching MAC addresses\
-| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | with IP and static payload. MAC addresses are matching MAC addresses \
+| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination \
 | ... | address) field is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +70,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv6 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot
index e42b76d..dcafad5 100644 (file)
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot
@@ -26,27 +26,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 routing with IEEE 802.1Q test
-| ... | cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. IEEE 802.1Q\
-| ... | tagging is applied on link between DUT1-if2 and TG-if2.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\
-| ... | two static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are\
-| ... | generated by TG on links to DUT1. TG traffic profile contains two L3\
-| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv6 header with IP\
-| ... | protocol=61 and static payload. MAC addresses are matching MAC\
+| Documentation | **RFC2544: Pkt throughput IPv6 routing with IEEE 802.1Q test \
+| ... | cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. \
+| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
+| ... | two static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are \
+| ... | generated by TG on links to DUT1. TG traffic profile contains two L3 \
+| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv6 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs IPv6 routing with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs IPv6 routing with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot
index 34bb6cd..ab6a3b0 100644 (file)
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot
@@ -26,27 +26,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 allowlist test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv6 allowlist test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6
-| ... | routing, two static IPv6 /64 routes and IPv6 ADL security allowlist
-| ... | ingress /64 filter entries applied on links TG - DUT1.
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 \
+| ... | routing, two static IPv6 /64 routes and IPv6 ADL security allowlist \
+| ... | ingress /64 filter entries applied on links TG - DUT1. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
 | ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv6 header and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv6 header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so
@@ -65,9 +70,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing and allowlist filters config with
+| | ... | - **[Cfg]** DUT runs IPv6 routing and allowlist filters config with \
 | | ... | ${phy_cores} phy core(s).
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot
index 141caeb..180a42f 100644 (file)
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot
@@ -26,26 +26,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 iAcl whitelist test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv6 iAcl whitelist test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6
-| ... | routing, two static IPv6 /64 routes and IPv6 iAcl security whitelist
-| ... | ingress /64 filter entries applied on links TG - DUT1.
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv6 header and generated payload. MAC
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 \
+| ... | routing, two static IPv6 /64 routes and IPv6 iAcl security whitelist \
+| ... | ingress /64 filter entries applied on links TG - DUT1. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv6 header and generated payload. MAC \
 | ... | addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -64,9 +69,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with
+| | ... | - **[Cfg]** DUT runs IPv6 routing and whitelist filters config with \
 | | ... | ${phy_cores} phy core(s).
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot
index 9d622d3..64a2e28 100644 (file)
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot
@@ -26,24 +26,29 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Packet throughput IPv6 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **Packet throughput IPv6 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and two\
-| ... | static IPv6 /64 route entries. DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header\
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
+| ... | and two static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -62,9 +67,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv6 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
index 207af58..82213a2 100644 (file)
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\
+| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
 | ... | 2x100k static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header\
-| ... | with IP and static payload. MAC addresses are matching MAC addresses\
-| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | with IP and static payload. MAC addresses are matching MAC addresses \
+| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination \
 | ... | address) field is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -64,9 +69,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config.
+| | ... | - **[Cfg]** DUT runs IPv6 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-rnd-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-rnd-ndrpdr.robot
index 43bab0f..fc5253e 100644 (file)
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-rnd-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-rnd-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\
+| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
 | ... | 2x100k static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header\
-| ... | with IP and static payload. MAC addresses are matching MAC addresses\
-| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | with IP and static payload. MAC addresses are matching MAC addresses \
+| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination \
 | ... | address) field is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -64,9 +69,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config.
+| | ... | - **[Cfg]** DUT runs IPv6 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
index 5d7d976..66f7d53 100644 (file)
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\
+| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
 | ... | 2x10k static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header\
-| ... | with IP and static payload. MAC addresses are matching MAC addresses\
-| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | with IP and static payload. MAC addresses are matching MAC addresses \
+| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination \
 | ... | address) field is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -64,9 +69,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config.
+| | ... | - **[Cfg]** DUT runs IPv6 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-rnd-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-rnd-ndrpdr.robot
index ce55cf5..b4aefe3 100644 (file)
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-rnd-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-rnd-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\
+| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
 | ... | 2x10k static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header\
-| ... | with IP and static payload. MAC addresses are matching MAC addresses\
-| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | with IP and static payload. MAC addresses are matching MAC addresses \
+| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination \
 | ... | address) field is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -64,9 +69,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config.
+| | ... | - **[Cfg]** DUT runs IPv6 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
index 8acb306..887f103 100644 (file)
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\
+| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
 | ... | 2x1M static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header\
-| ... | with IP and static payload. MAC addresses are matching MAC addresses\
-| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | with IP and static payload. MAC addresses are matching MAC addresses \
+| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination \
 | ... | address) field is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -64,9 +69,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv6 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-rnd-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-rnd-ndrpdr.robot
index 2878fff..879c3ce 100644 (file)
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-rnd-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-rnd-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\
+| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
 | ... | 2x1M static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header\
-| ... | with IP and static payload. MAC addresses are matching MAC addresses\
-| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | with IP and static payload. MAC addresses are matching MAC addresses \
+| ... | of the TG node interfaces. Randomization of IP.dst (IPv6 destination \
 | ... | address) field is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -64,9 +69,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config.\
+| | ... | - **[Cfg]** DUT runs IPv6 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot
index aad9d1f..1284d54 100644 (file)
--- a/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot
@@ -30,21 +30,26 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC6830: Pkt throughput Lisp test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.\
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv4 on DUT1-DUT2,\
-| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.\
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and static routes. LISPoIPv4 tunnel is configured between\
-| ... | DUT1 and DUT2. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
+| Documentation | **RFC6830: Pkt throughput Lisp test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes. \
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-LISP-IPv4 on DUT1-DUT2, \
+| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel. \
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and static routes. LISPoIPv4 tunnel is configured between \
+| ... | DUT1 and DUT2. DUT1 and DUT2 tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC6830.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
@@ -63,10 +68,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
-| | ... | filters config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.\
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPv6 LISP remote static mappings and whitelist \
+| | ... | filters config. \
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Frame size in Bytes as integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot
index df45bff..47fd4a8 100644 (file)
--- a/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot
@@ -30,21 +30,26 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC6830: Pkt throughput Lisp test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.\
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6 on DUT1-DUT2,\
-| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.\
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and static routes. LISPoIPv6 tunnel is configured between\
-| ... | DUT1 and DUT2. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
+| Documentation | **RFC6830: Pkt throughput Lisp test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes. \
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-LISP-IPv6 on DUT1-DUT2, \
+| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel. \
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and static routes. LISPoIPv6 tunnel is configured between \
+| ... | DUT1 and DUT2. DUT1 and DUT2 tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC6830.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
@@ -63,10 +68,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
-| | ... | filters config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.\
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs IPv6 LISP remote static mappings and whitelist \
+| | ... | filters config. \
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Frame size in Bytes as integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot
index 5db54b6..6aecbb1 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot
@@ -27,27 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC with 802.1ad test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 xconnect.
-| ... | 802.1ad tagging is applied on link between DUT1 and DUT2 with inner 4B
+| Documentation | **RFC2544: Pkt throughput L2XC with 802.1ad test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 xconnect. \
+| ... | 802.1ad tagging is applied on link between DUT1 and DUT2 with inner 4B \
 | ... | vlan tag (id=100) and outer 4B vlan tag (id=200).
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
-| ... | connect. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | cross-connect. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG. \
 | ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC forwarding config.
+| | ... | - **[Cfg]** DUT runs L2XC forwarding config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
index 780c82d..cbde673 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
@@ -26,27 +26,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\
-| ... | 802.1Q tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\
-| ... | domain and MAC learning enabled. DUT1 and DUT2 are tested\
+| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
+| ... | IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | bridge-\
+| ... | domain and MAC learning enabled. DUT1 and DUT2 are tested \
 | ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are\
-| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\
-| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are \
+| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \
+| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD config with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD config with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
index 9c2f0b0..ac8ea43 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC with IEEE 802.1Q test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. IEEE\
+| Documentation | **RFC2544: Pkt throughput L2XC with IEEE 802.1Q test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. IEEE \
 | ... | 802.1Q tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-\
-| ... | connect. DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are\
-| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\
-| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | cross-connect. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are \
+| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \
+| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -67,9 +72,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2XC config with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2XC config with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot
index 8c70fc1..e80d3cd 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot
index 93dcad3..a259c75 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot
index 1085163..3ef84a7 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot
index 737f76b..95c00c5 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot
index 817b55e..f8f6dfb 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot
index 5be6f99..2d30830 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... |  connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot
index 2be2a61..557821d 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot
index 8faeaa2..3b6f09a 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot
index a045ff2..675cbf1 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy
+| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \
 | | ... | core(s).
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot
index 9a426c3..6a1c65f 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot
index 003290e..5fb3469 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot
index a2dc8cd..c2dae43 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy
+| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \
 | | ... | core(s).
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot
index 60977d8..01978a1 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot
index 90c3de6..b7c1939 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot
index 067bfe6..cfaa006 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy
+| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \
 | | ... | core(s).
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot
index 63b3ffb..bd81d25 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching \
+| ... | of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot
index 30f536d..28de9e4 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot
index 3882157..64ae6b1 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy
+| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \
 | | ... | core(s).
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot
index 64fc2e3..8f9c364 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot
@@ -27,28 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required MACIP ACL rules are applied to input paths of both DUT1\
-| ... | interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by\
-| ... | Intel.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required MACIP ACL rules are applied to input paths of both DUT1 \
+| ... | addresses of the TG node interfaces. DUT1 and DUT2 are tested with \
+| ... | 2p10GE NIC X520 Niantic by Intel.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -82,9 +88,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot
index 837d803..6830f35 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot
@@ -27,28 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required MACIP ACL rules are applied to input paths of both DUT1\
-| ... | interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by\
-| ... | Intel.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required MACIP ACL rules are applied to input paths of both DUT1 \
+| ... | addresses of the TG node interfaces. DUT1 and DUT2 are tested with \
+| ... | 2p10GE NIC X520 Niantic by Intel.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -82,9 +88,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot
index 02e0433..4ebe9e4 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot
@@ -27,28 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required MACIP ACL rules are applied to input paths of both DUT1\
-| ... | interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by\
-| ... | Intel.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required MACIP ACL rules are applied to input paths of both DUT1 \
+| ... | addresses of the TG node interfaces. DUT1 and DUT2 are tested with \
+| ... | 2p10GE NIC X520 Niantic by Intel.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -82,9 +88,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot
index f840b2f..8a951d1 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot
@@ -27,27 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required MACIP ACL rules are applied to input paths of both DUT1\
-| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. Required MACIP ACL rules are applied to input paths of both \
+| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot
index 759064d..35058db 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot
@@ -27,27 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required MACIP ACL rules are applied to input paths of both DUT1\
-| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. Required MACIP ACL rules are applied to input paths of both \
+| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot
index 5ff1238..b167cd8 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot
@@ -27,27 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required MACIP ACL rules are applied to input paths of both DUT1\
-| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. Required MACIP ACL rules are applied to input paths of both \
+| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot
index 0b7d028..a6e7aa7 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot
@@ -27,27 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required MACIP ACL rules are applied to input paths of both DUT1\
-| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. Required MACIP ACL rules are applied to input paths of both \
+| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot
index 42e18e0..04ffc75 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot
@@ -27,27 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required MACIP ACL rules are applied to input paths of both DUT1\
-| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. Required MACIP ACL rules are applied to input paths of both \
+| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot
index 9830544..0c64674 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot
@@ -27,27 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required MACIP ACL rules are applied to input paths of both DUT1\
-| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. Required MACIP ACL rules are applied to input paths of both \
+| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -81,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot
index 9fec554..a425bb6 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot
@@ -26,24 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\
-| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
+| Documentation | **RFC2544: Pkt throughput L2BD test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | bridge-domain and MAC learning enabled. DUT1 and DUT2 are tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -62,9 +68,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD switching config and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD switching config and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot
index 8d7b823..fce37e5 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot
index cbacd52..fe9434e 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot
index da5710e..108e375 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot
index 5f6d151..7f9c73d 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot
index 1d0b5f0..406377f 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot
index 7991be1..8c576f2 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot
index 72705d5..5adca70 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot
index 2fa9c79..d7b05da 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching \
+| ... | of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation] | FIXME.
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot
index d3af3ae..e0d2886 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot
index 9ee7169..beb8297 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot
index aade203..a4d169a 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 \
+| ... | intefaces. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot
index e68ed5f..aedb96a 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot
index a4cf181..72a7b16 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot
index 07112f7..bd7c6e3 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot
index 6083b35..71a21d1 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot
index b269236..b577a8a 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot
index 10cebc8..045b1b3 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot
index 8563a43..fe88c5f 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot
@@ -27,27 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot
index ba8bc25..e43e689 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot
@@ -27,28 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput for L2BD test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\
-| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=61 and static payload.\
+| Documentation | **RFC2544: Pkt throughput for L2BD test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | bridge-domain and MAC learning enabled. DUT1 and DUT2 are tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. \
 | ... | MAC addresses ranges are incremented as follows:
 | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f,
 | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f,
 | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f,
 | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -67,9 +73,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [CFG] Each DUT runs L2BD switching config and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD switching config and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot
index a3dbe03..d7df02a 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot
@@ -27,28 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput for L2BD test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\
-| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=61 and static payload.\
+| Documentation | **RFC2544: Pkt throughput for L2BD test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | bridge-domain and MAC learning enabled. DUT1 and DUT2 are tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. \
 | ... | MAC addresses ranges are incremented as follows:
 | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f,
 | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f,
 | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f,
 | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -67,9 +73,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [CFG] Each DUT runs L2BD switching config and uses ${phy_cores}\
+| | ... | [CFG] Each DUT runs L2BD switching config and uses ${phy_cores} \
 | | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot
index 875c15e..25af80e 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot
@@ -27,28 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput for L2BD test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\
-| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=61 and static payload.\
+| Documentation | **RFC2544: Pkt throughput for L2BD test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | bridge-\
+| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. \
 | ... | MAC addresses ranges are incremented as follows:
 | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f,
 | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f,
 | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f,
 | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -67,9 +73,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD switching config and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD switching config and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot
index 93a8158..8d42937 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot
@@ -26,24 +26,29 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2patch test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 patch.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 patch\
-| ... | DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with\
-| ... | all packets containing Ethernet header,IPv4 header with static payload.\
+| Documentation | **RFC2544: Pkt throughput L2patch test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 patch.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | patch DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all \
+| ... | packets containing Ethernet header, IPv4 header with static payload \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -62,9 +67,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 patch config with ${phy_cores} phy
+| | ... | - **[Cfg]** DUT runs L2 patch config with ${phy_cores} phy \
 | | ... | core(s).
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot
index 0e2047c..b67ad4e 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot
@@ -26,24 +26,29 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
-| ... | connect. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2XC test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | cross-connect. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -62,9 +67,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC config with ${phy_cores} phy
+| | ... | - **[Cfg]** DUT runs L2XC config with ${phy_cores} phy \
 | | ... | core(s).
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
index c69dcfe..468f4ee 100644 (file)
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
@@ -26,28 +26,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4 for L2 switching of IPv4.\
-| ... | IEEE 802.1Q tagging is applied on both links TG-DUT1 .
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with:\
-| ... | 2 VLAN subinterfaces (VID 100 and 200),\
-| ... | 1 L2 BD with the 2 VLAN subinterfaces,\
-| ... | DUT1 tested with ${nic_name} with VF enabled.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are\
-| ... | generated by TG on links to DUT1. TG traffic profile contains two L3\
-| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4 for L2 switching \
+| ... | of IPv4. IEEE 802.1Q tagging is applied on both links TG-DUT1.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with: \
+| ... | 2 VLAN subinterfaces (VID 100 and 200), \
+| ... | 1 L2 BD with the 2 VLAN subinterfaces. \
+| ... | DUT1 is tested with ${nic_name} with VF enabled.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are \
+| ... | generated by TG on links to DUT1. TG traffic profile contains two L3 \
+| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -66,9 +71,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD with VLAN with ${phy_cores} physical core(s) for\
-| | ... | worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs L2BD with VLAN with ${phy_cores} physical \
+| | ... | core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
index 98552f3..7456c0b 100644 (file)
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC with IEEE 802.1Q test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. IEEE\
+| Documentation | **RFC2544: Pkt throughput L2XC with IEEE 802.1Q test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. IEEE \
 | ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross- connect.\
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are\
-| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\
-| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross-\
+| ... | connect. DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are \
+| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \
+| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -65,9 +70,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2XC config with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2XC config with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot
index e54e11c..780903e 100644 (file)
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot
@@ -27,27 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 1-node circular topology
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 1-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +86,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy
+| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \
 | | ... | core(s).
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot
index 4be7be3..a22e4e8 100644 (file)
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot
@@ -27,27 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +86,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy
+| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \
 | | ... | core(s).
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot
index 085b9de..14fa121 100644 (file)
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot
@@ -27,27 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled.\
-| ... | Required MACIP ACL rules are applied to input paths of both DUT1\
-| ... | interfaces. DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. \
+| ... | Required MACIP ACL rules are applied to input paths of both DUT1 \
+| ... | addresses of the TG node interfaces. DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -81,9 +86,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot
index 7636dd6..d300bc4 100644 (file)
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot
@@ -26,24 +26,29 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput L2BD test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \
+| ... | and MAC learning enabled. DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -62,9 +67,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config and uses ${phy_cores} physical\
-| | ... | core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs L2BD switching config and uses ${phy_cores} \
+| | ... | physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot
index f1bd1b2..f6fc83e 100644 (file)
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot
@@ -27,27 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +86,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot
index a7a5327..33a82e9 100644 (file)
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot
@@ -27,27 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -80,9 +86,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot
index 5bc5a04..6b12fc1 100644 (file)
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot
@@ -27,28 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput for L2BD test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput for L2BD test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=61 and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \
+| ... | and MAC learning enabled. DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. \
 | ... | MAC addresses ranges are incremented as follows:
 | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f,
 | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f,
 | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f,
 | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -67,9 +72,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config and uses ${phy_cores} physical\
-| | ... | core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs L2BD switching config and uses ${phy_cores} \
+| | ... | physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot
index 591933b..8d19ecd 100644 (file)
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot
@@ -27,28 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput for L2BD test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput for L2BD test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=61 and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \
+| ... | and MAC learning enabled. DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. \
 | ... | MAC addresses ranges are incremented as follows:
 | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f,
 | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f,
 | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f,
 | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -67,9 +72,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config and uses ${phy_cores} physical\
-| | ... | core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs L2BD switching config and uses ${phy_cores} \
+| | ... | physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot
index 0c9d2a0..c8ed6a8 100644 (file)
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot
@@ -27,28 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput for L2BD test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput for L2BD test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=61 and static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \
+| ... | and MAC learning enabled. DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. \
 | ... | MAC addresses ranges are incremented as follows:
 | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f,
 | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f,
 | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f,
 | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -67,9 +72,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config and uses ${phy_cores} physical\
-| | ... | core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs L2BD switching config and uses ${phy_cores} \
+| | ... | physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot
index 35f94c8..356eff5 100644 (file)
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot
@@ -26,24 +26,29 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2patch test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput L2patch test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 patch.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 patch\
-| ... | DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with\
-| ... | all packets containing Ethernet header,IPv4 header with static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 patch.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 patch \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all \
+| ... | packets containing Ethernet header, IPv4 header with static payload \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -62,9 +67,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 patch config with ${phy_cores} phy
+| | ... | - **[Cfg]** DUT runs L2 patch config with ${phy_cores} phy \
 | | ... | core(s).
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot
index 8c55c56..aa9e045 100644 (file)
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot
@@ -26,24 +26,29 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput L2XC test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect.
-| ... | DUT1 tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with\
-| ... | all packets containing Ethernet header,IPv4 header with static payload.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all \
+| ... | packets containing Ethernet header, IPv4 header with static payload \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -62,9 +67,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC config.\
+| | ... | - **[Cfg]** DUT runs L2XC config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-l3dsr-ndrpdr.robot b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-l3dsr-ndrpdr.robot
index 25dec68..ebda8a2 100644 (file)
--- a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-l3dsr-ndrpdr.robot
+++ b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-l3dsr-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput loadbalancer l3dsr test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput loadbalancer l3dsr test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for LoadBalancer l3dsr.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with LoadBalancer\
-| ... | l3dsr and one static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT. TG traffic profile\
-| ... | contains two L4 flow-groups (l3dsr use flow-group is only from TG\
-| ... | to DUT, 6 flows for flow-group) with all packets containing Ethernet\
-| ... | header, IPv4 header with IP protocol=17 and static payload. MAC\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for LoadBalancer l3dsr.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with LoadBalancer \
+| ... | l3dsr and one static IPv4 /24 route entries. DUT1 tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT. TG traffic profile \
+| ... | contains two L4 flow-groups (l3dsr use flow-group is only from TG \
+| ... | to DUT, 6 flows for flow-group) with all packets containing Ethernet \
+| ... | header, IPv4 header with IP protocol=17 and static payload. MAC \
 | ... | addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lb_plugin.so
@@ -64,9 +69,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs LoadBalancer l3dsr config.\
+| | ... | - **[Cfg]** DUT runs LoadBalancer l3dsr config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot
index 2c58df9..3edefd9 100644 (file)
--- a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot
+++ b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput loadbalancer maglev test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput loadbalancer maglev test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for LoadBalancer maglev.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with LoadBalancer\
-| ... | maglev and one static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT. TG traffic profile\
-| ... | contains two L4 flow-groups (maglev use flow-group is only from TG\
-| ... | to DUT, 6 flows for flow-group) with all packets containing Ethernet\
-| ... | header, IPv4 header with IP protocol=17 and static payload. MAC\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for LoadBalancer maglev.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with LoadBalancer \
+| ... | maglev and one static IPv4 /24 route entries. DUT1 tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUT. TG traffic profile \
+| ... | contains two L4 flow-groups (maglev use flow-group is only from TG \
+| ... | to DUT, 6 flows for flow-group) with all packets containing Ethernet \
+| ... | header, IPv4 header with IP protocol=17 and static payload. MAC \
 | ... | addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lb_plugin.so
@@ -64,9 +69,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs LoadBalancer maglev config.\
+| | ... | - **[Cfg]** DUT runs LoadBalancer maglev config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-nat4-ndrpdr.robot b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-nat4-ndrpdr.robot
index ba0ebd0..20620ed 100644 (file)
--- a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-nat4-ndrpdr.robot
+++ b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-nat4-ndrpdr.robot
@@ -26,25 +26,30 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput loadbalancer nat4 test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput loadbalancer nat4 test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for LoadBalancer nat4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with LoadBalancer\
-| ... | nat4 and two static IPv4 /24 route entries. DUT1 tested with\
-| ... | ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L4 flow-groups (flow-group per direction, 6 flows per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with IP protocol=17 and static payload. MAC addresses are matching MAC\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for LoadBalancer nat4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with LoadBalancer \
+| ... | nat4 and two static IPv4 /24 route entries. DUT1 tested with \
+| ... | with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L4 flow-groups (flow-group per direction, 6 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=17 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lb_plugin.so
@@ -63,9 +68,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs LoadBalancer nat4 config.\
+| | ... | - **[Cfg]** DUT runs LoadBalancer nat4 config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot
index 13ab555..6305950 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 10 chains
-| ... | 10 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 10 \
+| ... | chains 10 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot
index 3c50fee..2b8dd07 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 10 chains
-| ... | 10 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 10 \
+| ... | chains 10 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot
index 22f7a58..2fed1be 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 10 chains
-| ... | 20 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 10 \
+| ... | chains 20 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot
index 9c58783..acb97f0 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 6 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 6 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot
index 4e231c1..5f2b7d8 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 6 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 6 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot
index 2a2fec3..461bb70 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot
index 772a803..759dcd3 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot
index 1414a3f..1a5ff16 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 10 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 10 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot
index 4702648..1de1be0 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 10 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 10 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domainsand MAC learning enabled. DUT1 tested with ${nic_name}.
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot
index e494ac0..270b127 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot
index ac9ce1c..90b0c80 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot
index c720a45..a360c5c 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot
index 7149698..80671e2 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot
index ca6cbc5..536beb8 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot
index 02cba05..7bb3e98 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot
index 7aeec10..d1d65cb 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot
index 74c254e..eb0c842 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot
index 844e84d..f141a5d 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 12 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 12 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot
index 8a59a79..a69b285 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 12 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 12 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot
index 9878b54..d942801 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 16 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 16 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot
index a8f77b3..2c59f70 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot
@@ -28,27 +28,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 16 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 16 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -75,9 +79,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot
index 5ad81f1..8327148 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 20 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 20 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot
index bde57e9..2ae915f 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot
index afce74f..0ce59ac 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot
index 19d6862..0015d45 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot
index 25ca78a..dc66918 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 2 chains
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 2 chains 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot
index 5cd468a..799dc93 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 4 chains 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot
index 54e5895..ecf2d4d 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 4 chains 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot
index 0951fc3..a540621 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains
-| ... | 16 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 4 chains 16 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot
index 026e51d..53f8672 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains
-| ... | 16 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 4 chains 16 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot
index 76968d0..efbfbc2 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains
-| ... | 24 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 4 chains 24 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot
index 7a9375c..acc6e19 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 4 chains 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot
index dd0475f..49fe257 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 4 chains
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 4 chains 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot
index 7e4bf66..98988a8 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 6 chains
-| ... | 6 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 6 chains 6 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot
index 34b1e80..a9273ce 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 6 chains
-| ... | 6 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 6 chains 6 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot
index a55ea56..ed38bd9 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 6 chains
-| ... | 12 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 6 chains 12 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domainsand MAC learning enabled. DUT1 tested with ${nic_name}.
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot
index 4d4a2af..474a300 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 6 chains
-| ... | 12 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 6 chains 12 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot
index 1c87a9a..e52a949 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 6 chains
-| ... | 24 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 6 chains 24 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot
index 3439e63..93d32c0 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 8 chains
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 8 chains 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot
index 81b132d..bc9efd7 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 8 chains
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 8 chains 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot
index bde55e5..b0b3cd3 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 8 chains
-| ... | 16 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 8 chains 16 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot
index 61d908e..82c34ba 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 8 chains
-| ... | 16 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif \
+| ... | 8 chains 16 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 7e57ec0..b02bd4b 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 498416d..1d34a5a 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 1bf5ace..4c352b7 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 0292704..24ff94b 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 780fd75..9ce9340 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 8db6b11..3c4b989 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 2484152..a1afc39 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 930b7d6..f75f021 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 8c8d689..e50e978 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 3810bc9..65f1be8 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index ec19a00..51ea08c 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 9a0318a..604219c 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 3d8cbed..bf2bbf3 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index df0db3d..c8b6977 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index cee11ba..0baad2c 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 99bf94f..8079ee8 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 8944e8e..8cd5b7e 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
 | | ... | ${encr_alg} | ${auth_alg} | ${laddr_ip4} | ${raddr_ip4}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index c2682c9..d4636b1 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 71ee884..613cf81 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 4ad4239..8f4e131 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
index b0357f0..7bce83e 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 0c3df48..22ffc1f 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 2d783dc..f1eab2c 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 0111bb3..6dbd754 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 6adb68e..3fdea05 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index f73220a..dcebf91 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 55353ca..8d0f8f8 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 73c82ab..d35997c 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index e846935..894de6e 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 7b35217..8684f2c 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index a63acb7..62f7a4e 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 34fe8c6..923d779 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 8 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 8 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
index b4d7ee7..f899526 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
index 54d056e..d15c43d 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 2 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 2 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
index f9e20c7..7a03e27 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain_ipsec/10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr.robot
@@ -28,23 +28,27 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 4 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 4 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -81,10 +85,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -106,7 +110,7 @@
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
-| | And Initialize IPSec in 3-node circular topology
+| | And Initialize IPSec in 3-node circular topology \
 | | And Stop VPP service on all DUTs | ${nodes}
 | | And VPP IPsec Create Tunnel Interfaces in Containers
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot
index aa14f5f..3b672cb 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 20memif 10
-| ... | pipelines 1 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 20memif 10 \
+| ... | pipelines 1 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot
index f0cdb01..be9be72 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 20memif 10
-| ... | pipelines 1 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 20memif 10 \
+| ... | pipelines 1 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot
index a4509e4..f70330d 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 20 memif 10
-| ... | pipelines 20 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 20 memif 10 \
+| ... | pipelines 20 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot
index c130cd2..7b90ee1 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 10 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 10 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot
index eb872de..be38caf 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 10 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 10 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot
index 2c03217..99dd4a3 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot
index 26e8281..42de5f3 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot
index bad6f4d..93a86e0 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 2 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 2 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot
index f0f103d..55d3608 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 2 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 2 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot
index a63bf32..b8488db 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 4 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 4 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot
index bb43f21..2dee783 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 4 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 4 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot
index 3fab957..5a6878e 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 6 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 6 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot
index ab829f3..5619da4 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 6 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 6 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot
index b3b4849..d794125 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 8 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 8 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot
index 6bf0789..a37472e 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 1
-| ... | pipeline 8 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 \
+| ... | pipeline 8 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot
index 93e9b04..890a9d3 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 12 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 12 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot
index a84af5d..b22a15f 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 12 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 12 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot
index 0615fa4..7f87e4c 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 16 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 16 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot
index 32026bd..05d5b16 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 16 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 16 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot
index 374a162..86cb4aa 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4 memif 2
-| ... | pipelines 20 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 20 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot
index 880230a..d3e0617 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 2 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 2 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot
index 45740ff..f68cbbf 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 2 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 2 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot
index ab2b083..6eeb515 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 2
-| ... | pipelines 4 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 4 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot
index fe41245..90416f6 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 2memif 2
-| ... | pipelines 4 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 4 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot
index cfe4f12..a59dfc4 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 8 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 8 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot
index bbc8733..b97c8b7 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 4memif 2
-| ... | pipelines 8 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 \
+| ... | pipelines 8 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot
index 09d9de9..fce6314 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4
-| ... | pipelines 4 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \
+| ... | pipelines 4 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot
index 2bd6990..7b6a933 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4
-| ... | pipelines 4 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \
+| ... | pipelines 4 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot
index 388a3ed..a1b8e16 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4
-| ... | pipelines 16 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \
+| ... | pipelines 16 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot
index 64e1b1e..d3721f1 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4
-| ... | pipelines 16 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \
+| ... | pipelines 16 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot
index 6c2bba6..cab519e 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8 memif 4
-| ... | pipelines 24 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \
+| ... | pipelines 24 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot
index 0d265ab..b5a1f38 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4
-| ... | pipelines 8 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \
+| ... | pipelines 8 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot
index c411080..b044201 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 8memif 4
-| ... | pipelines 8 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 \
+| ... | pipelines 8 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot
index 22ee0b7..d577b72 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 12memif 6
-| ... | pipelines 12 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6 \
+| ... | pipelines 12 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot
index f047294..3e062b0 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 12memif 6
-| ... | pipelines 12 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6 \
+| ... | pipelines 12 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot
index 6a765bf..92e5a66 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 12 memif 6
-| ... | pipelines 24 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6 \
+| ... | pipelines 24 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot
index 709586e..5f72802 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 12memif 6
-| ... | pipelines 1 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6 \
+| ... | pipelines 1 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot
index 28252cd..b759be9 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 12memif 6
-| ... | pipelines 1 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6 \
+| ... | pipelines 1 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot
index 75701c4..fde6320 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 16memif 8
-| ... | pipelines 16 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 16memif 8 \
+| ... | pipelines 16 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot
index 612d31e..a78f82e 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 16memif 8
-| ... | pipelines 16 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 16memif 8 \
+| ... | pipelines 16 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot
index 39c7c82..d82987b 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 16memif 8
-| ... | pipelines 8 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 16memif 8 \
+| ... | pipelines 8 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot
index f657ccc..60b7f8f 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -27,27 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with 16memif 8
-| ... | pipelines 8 docker containers*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
-| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
-| ... | Container is connected to VPP via Memif interface. Container is running
-| ... | same VPP version as running on DUT. Container is limited via cgroup to
-| ... | use cores allocated from pool of isolated CPUs. There are no memory
-| ... | contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with 16memif 8 \
+| ... | pipelines 8 docker containers**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \
+| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \
+| ... | Container is connected to VPP via Memif interface. Container is \
+| ... | running same VPP version as running on DUT. Container is limited via \
+| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \
+| ... | no memory contraints.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot
index 759d8f4..41f465d 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,33 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 20 vhost 10 chains 10 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 20 vhost 10 chains \
+| ... | 10 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot
index a776583..9b38eb7 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,33 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 20 vhost 10 chains 10 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 20 vhost 10 chains \
+| ... | 10 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot
index 092b7a1..cabd5af 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,33 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 40 vhost 10 chains 20 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 40 vhost 10 chains \
+| ... | 20 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot
index 1bc45bb..6077e3a 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 12 vhost 1 chain 6 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 12 vhost 1 chain 6 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot
index 298d924..9d7946a 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 12 vhost 1 chain 6 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 12 vhost 1 chain 6 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot
index c47b654..498d0ee 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 1 chain 8 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 16 vhost 1 chain 8 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot
index 26d876d..df87b85 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 1 chain 8 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 16 vhost 1 chain 8 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot
index 55e5e2c..ab2e7a5 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 20 vhost 1 chain 10 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 20 vhost 1 chain 10 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot
index 15c22e7..ff14e79 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 20 vhost 1 chain 10 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 20 vhost 1 chain 10 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot
index 06054d9..288784e 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 2 vhost 1 chain 1 VM*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 2 vhost 1 chain 1 VM**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot
index 32ad054..e470f9c 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 2 vhost 1 chain 1 VM*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 2 vhost 1 chain 1 VM**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot
index 9162c3b..d644203 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 4 vhost 1 chain 2 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 4 vhost 1 chain 2 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot
index 54d5664..4d6e309 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 4 vhost 1 chain 2 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 4 vhost 1 chain 2 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot
index e412686..321da41 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 1 chains 4 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 8 vhost 1 chains 4 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot
index c87adc1..657625e 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 1 chains 4 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 8 vhost 1 chains 4 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot
index a45275b..6ac1160 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 2 chains 8 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 16 vhost 2 chains 8 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot
index b9e6a3b..7a92e4a 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 2 chains 8 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 16 vhost 2 chains 8 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot
index 1c469b8..686b427 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,33 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 24 vhost 2 chains 12 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 24 vhost 2 chains \
+| ... | 12 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot
index b0a3f7c..d5a3c5a 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,33 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 24 vhost 2 chains 12 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 24 vhost 2 chains \
+| ... | 12 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot
index 65d7c70..fe2a47d 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,33 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 2 chains 16 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 32 vhost 2 chains \
+| ... | 16 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot
index 3d1a4cb..66a479a 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,33 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 2 chains 16 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 32 vhost 2 chains \
+| ... | 16 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot
index b69c31c..11ea845 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,33 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 40 vhost 2 chains 20 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 40 vhost 2 chains \
+| ... | 20 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot
index e60b5d4..e8614f7 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 4 vhost 2 chains 2 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 4 vhost 2 chains 2 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot
index de19cc0..428d4f2 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 4 vhost 2 chains 2 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 4 vhost 2 chains 2 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot
index 3db8b63..e2d69d5 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 2 chains 4 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 8 vhost 2 chains 4 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot
index 72c679c..7c74872 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 2 chains 4 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 8 vhost 2 chains 4 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot
index f649e9e..ea93393 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 4 chains 8 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 16 vhost 4 chains 8 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot
index ddfa376..09f570b 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 4 chains 8 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 16 vhost 4 chains 8 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot
index d8b07b7..bb13aa4 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,33 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 4 chains 16 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 32 vhost 4 chains \
+| ... | 16 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot
index 6d45dab..2f95b64 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,33 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 4 chains 16 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 32 vhost 4 chains \
+| ... | 16 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot
index 6930cd9..f2dd317 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,33 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 48 vhost 4 chains 24 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 48 vhost 4 chains \
+| ... | 24 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot
index caf908d..65810ee 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 4 chains 4 VM*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 8 vhost 4 chains 4 VM**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot
index 7a10bc8..941af19 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 8 vhost 4 chains 4 VM*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 8 vhost 4 chains 4 VM**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot
index 33f45ec..cc96250 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 12 vhost 6 chains 6 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 12 vhost 6 chains 6 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot
index abcbcbf..498d816 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 12 vhost 6 chains 6 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 12 vhost 6 chains 6 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot
index 5edab14..7eb8cde 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,33 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 24 vhost 6 chains 12 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 24 vhost 6 chains \
+| ... | 12 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot
index 55204a5..31c7313 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,33 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 24 vhost 6 chains 12 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 24 vhost 6 chains \
+| ... | 12 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot
index 9064b39..3e2fb16 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,33 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 48 vhost 6 chains 24 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 48 vhost 6 chains \
+| ... | 24 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot
index f2e4920..9403733 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 8 chains 8 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 16 vhost 8 chains 8 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot
index f3dc6c7..93fca9e 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,32 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 16 vhost 8 chains 8 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 16 vhost 8 chains 8 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot
index ad8242c..c83cad8 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot
@@ -28,27 +28,33 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 8 chains 16 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 32 vhost 8 chains \
+| ... | 16 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot
index ed0c07c..e85f4f0 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot
@@ -28,27 +28,33 @@
 | Test Template | Local Template
 |
 | Documentation
-| ... | *RFC2544: Pkt throughput L2BD test cases with 32 vhost 8 chains 16 VMs*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | **RFC2544: Pkt throughput L2BD test cases with 32 vhost 8 chains \
+| ... | 16 VMs**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -71,9 +77,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot
index a0a8f3c..77d05cf 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot
@@ -28,28 +28,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance, then measured loss at this load\
-| ... | while additional chain is configured.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \
+| ... | Rate) with zero packet loss tolerance, then measured loss at this load \
+| ... | while additional chain is configured. \
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot
index 18ef575..3b039b8 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot
@@ -28,28 +28,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance, then measured loss at this load\
-| ... | while additional chain is configured.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \
+| ... | Rate) with zero packet loss tolerance, then measured loss at this load \
+| ... | while additional chain is configured. \
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm1t-testpmd-ndrpdr.robot
index 88945b0..362cf6f 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm1t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm1t-testpmd-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -75,9 +80,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm2t-testpmd-ndrpdr.robot
index 175ea95..0079641 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm2t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm2t-testpmd-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -75,9 +80,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot
index a73d74a..ea9768e 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot
@@ -28,28 +28,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance, then measured loss at this load\
-| ... | while additional chain is configured.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \
+| ... | Rate) with zero packet loss tolerance, then measured loss at this load \
+| ... | while additional chain is configured. \
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot
index daaf060..edfe00d 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot
@@ -28,28 +28,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance, then measured loss at this load\
-| ... | while additional chain is configured.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \
+| ... | Rate) with zero packet loss tolerance, then measured loss at this load \
+| ... | while additional chain is configured. \
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm1t-testpmd-ndrpdr.robot
index 7536943..bb1d9ba 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm1t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm1t-testpmd-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -75,9 +80,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm2t-testpmd-ndrpdr.robot
index f13c1d2..2ba72ba 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm2t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm2t-testpmd-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -75,9 +80,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot
index 55b6d99..aa31b22 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot
@@ -28,28 +28,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance, then measured loss at this load\
-| ... | while additional chain is configured.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \
+| ... | Rate) with zero packet loss tolerance, then measured loss at this load \
+| ... | while additional chain is configured. \
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot
index fb9882e..15b2cb5 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot
@@ -28,28 +28,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance, then measured loss at this load\
-| ... | while additional chain is configured.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \
+| ... | Rate) with zero packet loss tolerance, then measured loss at this load \
+| ... | while additional chain is configured. \
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm1t-testpmd-ndrpdr.robot
index 96854cb..533e232 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm1t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm1t-testpmd-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -75,9 +80,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm2t-testpmd-ndrpdr.robot
index 5a109f1..aaa862c 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm2t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm2t-testpmd-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -75,9 +80,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot
index 9aaba04..6a73767 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot
@@ -28,28 +28,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance, then measured loss at this load\
-| ... | while additional chain is configured.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \
+| ... | Rate) with zero packet loss tolerance, then measured loss at this load \
+| ... | while additional chain is configured. \
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot
index 67f7b00..89ff4dd 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot
@@ -28,28 +28,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance, then measured loss at this load\
-| ... | while additional chain is configured.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \
+| ... | Rate) with zero packet loss tolerance, then measured loss at this load \
+| ... | while additional chain is configured. \
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm1t-testpmd-ndrpdr.robot
index 8af7e28..fd77197 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm1t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm1t-testpmd-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -75,9 +80,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm2t-testpmd-ndrpdr.robot
index 71153b5..c113b6b 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm2t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm2t-testpmd-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -75,9 +80,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm1t-testpmd-ndrpdr.robot
index d74b238..cb820f1 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm1t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm1t-testpmd-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -75,9 +80,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm2t-testpmd-ndrpdr.robot
index 6ed05ba..8072729 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm2t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm2t-testpmd-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -75,9 +80,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot
index 58a2908..9494cd9 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot
@@ -28,28 +28,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance, then measured loss at this load\
-| ... | while additional chain is configured.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \
+| ... | Rate) with zero packet loss tolerance, then measured loss at this load \
+| ... | while additional chain is configured. \
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot
index 5d9ea7c..6370c55 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot
@@ -28,28 +28,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance, then measured loss at this load\
-| ... | while additional chain is configured.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \
+| ... | Rate) with zero packet loss tolerance, then measured loss at this load \
+| ... | while additional chain is configured. \
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm1t-testpmd-ndrpdr.robot
index bf27418..edeeb04 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm1t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm1t-testpmd-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -75,9 +80,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm2t-testpmd-ndrpdr.robot
index 5a53181..08d87e6 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm2t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm2t-testpmd-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -75,9 +80,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot
index c5c0816..19b19fb 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot
@@ -28,28 +28,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance, then measured loss at this load\
-| ... | while additional chain is configured.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \
+| ... | Rate) with zero packet loss tolerance, then measured loss at this load \
+| ... | while additional chain is configured. \
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot
index fd26e1f..a4f5942 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot
@@ -28,28 +28,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and
-| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and
+| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
-| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
-| ... | between DUT1 and TG.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
-| ... | domain and MAC learning enabled. Qemu VNFs are connected\
-| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
-| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \
+| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \
+| ... | applied on link between DUT1 and TG.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
+| ... | domain and MAC learning enabled. Qemu VNFs are connected \
+| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \
+| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance, then measured loss at this load\
-| ... | while additional chain is configured.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
-| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
-| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \
+| ... | Rate) with zero packet loss tolerance, then measured loss at this load \
+| ... | while additional chain is configured. \
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \
+| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \
+| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \
 | ... | matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
@@ -74,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
+| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
+| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot
index d5ab992..4dddd7c 100644 (file)
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot
@@ -27,29 +27,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Packet throughput Segment routing over IPv6 dataplane with\
-| ... | one SID (SRH not inserted) test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-IPv6 on DUT1-DUT2, Eth-IPv6 on\
-| ... | TG-DUTn for IPv6 routing over SRv6.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and static route, SR policy and steering policy for one\
-| ... | direction and one SR behaviour (function) - End.DX6 - for other\
-| ... | direction. DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 253 flows per flow-group) with\
-| ... | all packets containing Ethernet header,IPv6 header with static payload.\
+| Documentation | **Packet throughput Segment routing over IPv6 dataplane with \
+| ... | one SID (SRH not inserted) test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-IPv6 on DUT1-DUT2, \
+| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and static route, SR policy and steering policy for one \
+| ... | direction and one SR behaviour (function) - End.DX6 - for other \
+| ... | direction. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with \
+| ... | all packets containing Ethernet header,IPv6 header with static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
-| ... | draft 3.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \
+| ... | Programming - draft 3.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -85,11 +91,11 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\
-| | ... | routing and static route, SR policy and steering policy for one\
-| | ... | direction and one SR behaviour (function) - End - for other direction.
+| | ... | - **[Cfg]** DUT1 and DUT2 are configured with IPv6 routing \
+| | ... | and static route, SR policy and steering policy for one direction \
+| | ... | and one SR behaviour (function) - End - for other direction. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot
index 34511bd..3498aa7 100644 (file)
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot
@@ -27,29 +27,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Packet throughput Segment routing over IPv6 dataplane with\
-| ... | two SIDs (SRH inserted) test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2, Eth-IPv6\
-| ... | on TG-DUTn for IPv6 routing over SRv6.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and static route, SR policy and steering policy for one\
-| ... | direction and two SR behaviours (functions) - End and End.DX6 - for\
-| ... | other direction. DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 253 flows per flow-group) with\
-| ... | all packets containing Ethernet header,IPv6 header with static payload.\
+| Documentation | **Packet throughput Segment routing over IPv6 dataplane with \
+| ... | two SIDs (SRH inserted) test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-SRH-IPv6 on DUT1-DUT2, \
+| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and static route, SR policy and steering policy for one \
+| ... | direction and two SR behaviours (functions) - End and End.DX6 - for \
+| ... | other direction. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with \
+| ... | all packets containing Ethernet header,IPv6 header with static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
-| ... | draft 3.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \
+| ... | Programming - draft 3.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -88,12 +94,12 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\
-| | ... | routing and static route, SR policy and steering policy for one\
-| | ... | direction and two SR behaviours (functions) - End and End.DX6 - for\
+| | ... | - **[Cfg]** DUT1 and DUT2 are configured with IPv6 \
+| | ... | routing and static route, SR policy and steering policy for one \
+| | ... | direction and two SR behaviours (functions) - End and End.DX6 - for \
 | | ... | other direction.
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot
index f35590f..4f37c1c 100644 (file)
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot
@@ -27,29 +27,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Packet throughput Segment routing over IPv6 dataplane with\
-| ... | two SIDs (SRH inserted) without decapsulation test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and\
+| Documentation | **Packet throughput Segment routing over IPv6 dataplane with \
+| ... | two SIDs (SRH inserted) without decapsulation test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and \
 | ... | DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and static route, SR policy and steering policy for one\
-| ... | direction and one SR behaviour (function) - End - for other direction.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 253 flows per flow-group) with\
-| ... | all packets containing Ethernet header,IPv6 header with static payload.\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and static route, SR policy and steering policy for one \
+| ... | direction and one SR behaviour (function) - End - for other direction. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with \
+| ... | all packets containing Ethernet header,IPv6 header with static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
-| ... | draft 3.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \
+| ... | Programming - draft 3.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -88,11 +94,11 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\
-| | ... | routing and static route, SR policy and steering policy for one\
-| | ... | direction and one SR behaviour (function) - End - for other direction.
+| | ... | - **[Cfg]** DUT1 and DUT2 are configured with IPv6 routing \
+| | ... | and static route, SR policy and steering policy for one direction \
+| | ... | and one SR behaviour (function) - End - for other direction. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot
index 2861e7f..af154cc 100644 (file)
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot
@@ -27,29 +27,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Packet throughput Segment routing over IPv6 dataplane with\
-| ... | Dynamic SRv6 proxy test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and\
+| Documentation | **Packet throughput Segment routing over IPv6 dataplane with \
+| ... | Dynamic SRv6 proxy test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and \
 | ... | DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and static route, SR policy and steering policy for one\
-| ... | direction and one SR behaviour (function) - End.AD - for other\
-| ... | direction. DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 253 flows per flow-group) with\
-| ... | all packets containing Ethernet header,IPv6 header with static payload.\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and static route, SR policy and steering policy for one \
+| ... | direction and one SR behaviour (function) - End.AD - for other \
+| ... | direction. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with \
+| ... | all packets containing Ethernet header,IPv6 header with static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
-| ... | draft 3 and Segment Routing for Service Chaining - internet draft 01.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \
+| ... | Programming - draft 3.and Segment Routing for Service Chaining \
+| ... | - internet draft 01.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -100,11 +107,11 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\
-| | ... | routing and static route, SR policy and steering policy for one\
-| | ... | direction and SR behaviour (function) - End.AD - for other direction.
+| | ... | - **[Cfg]** DUT1 and DUT2 are configured with IPv6 routing \
+| | ... | and static route, SR policy and steering policy for one direction \
+| | ... | and SR behaviour (function) - End.AD - for other direction. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot
index 06af356..07f2312 100644 (file)
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot
@@ -27,29 +27,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Packet throughput Segment routing over IPv6 dataplane with\
-| ... | Masquerading SRv6 proxy test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2, DUTn-CNT\
-| ... | and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and static route, SR policy and steering policy for one\
-| ... | direction and one SR behaviour (function) - End.AM - for other\
-| ... | direction. DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 253 flows per flow-group) with\
-| ... | all packets containing Ethernet header,IPv6 header with static payload.\
+| Documentation | **Packet throughput Segment routing over IPv6 dataplane with \
+| ... | Masquerading SRv6 proxy test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-SRH-IPv6 on DUT1-DUT2, \
+| ... | DUTn-CNT and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and static route, SR policy and steering policy for one \
+| ... | direction and one SR behaviour (function) - End.AM - for other \
+| ... | direction. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with \
+| ... | all packets containing Ethernet header,IPv6 header with static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
-| ... | draft 3 and Segment Routing for Service Chaining - internet draft 01.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \
+| ... | Programming - draft 3.and Segment Routing for Service Chaining \
+| ... | - internet draft 01.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -100,11 +107,11 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\
-| | ... | routing and static route, SR policy and steering policy for one\
-| | ... | direction and SR behaviour (function) - End.AM - for other direction.
+| | ... | - **[Cfg]** DUT1 and DUT2 are configured with IPv6 routing \
+| | ... | and static route, SR policy and steering policy for one direction \
+| | ... | and SR behaviour (function) - End.AM - for other direction. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot
index ea46dac..79a298a 100644 (file)
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot
@@ -27,29 +27,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *Packet throughput Segment routing over IPv6 dataplane with\
-| ... | Static SRv6 proxy test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and\
+| Documentation | **Packet throughput Segment routing over IPv6 dataplane with \
+| ... | Static SRv6 proxy test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and \
 | ... | DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and static route, SR policy and steering policy for one\
-| ... | direction and one SR behaviour (function) - End.AS - for other\
-| ... | direction. DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 253 flows per flow-group) with\
-| ... | all packets containing Ethernet header,IPv6 header with static payload.\
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and static route, SR policy and steering policy for one \
+| ... | direction and one SR behaviour (function) - End.AS - for other \
+| ... | direction. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with \
+| ... | all packets containing Ethernet header,IPv6 header with static \
+| ... | payload. \
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
-| ... | draft 3 and Segment Routing for Service Chaining - internet draft 01.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** SRv6 Network \
+| ... | Programming - draft 3.and Segment Routing for Service Chaining \
+| ... | - internet draft 01.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
@@ -100,11 +107,11 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\
-| | ... | routing and static route, SR policy and steering policy for one\
-| | ... | direction and SR behaviour (function) - End.AS - for other direction.
+| | ... | - **[Cfg]** DUT1 and DUT2 are configured with IPv6 routing \
+| | ... | and static route, SR policy and steering policy for one direction \
+| | ... | and SR behaviour (function) - End.AS - for other direction. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
index b2b757e..292fcad 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost and vpp
-| ... | link bonding*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. 802.1q
-| ... | tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP
-| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost and vpp \
+| ... | link bonding**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
+| ... | 802.1q tagging is applied on link between DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \
+| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \
 | ... | DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so
@@ -81,9 +86,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index c35e958..d77747c 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost and vpp
-| ... | link bonding*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. 802.1q
-| ... | tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP
-| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost and vpp \
+| ... | link bonding**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
+| ... | 802.1q tagging is applied on link between DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \
+| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \
 | ... | DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so
@@ -81,9 +86,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
index ee7e4b1..83ee9ba 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost and vpp
-| ... | link bonding*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q
-| ... | tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP
-| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and
+| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost and vpp \
+| ... | link bonding**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. \
+| ... | 802.1q tagging is applied on link between DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \
+| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \
 | ... | DUT2 and L2 cross- connect. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config.
+| | ... | - **[Cfg]** DUT runs L2XC switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index d0aa44d..0e93bf1 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -28,30 +28,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost and vpp
-| ... | link bonding*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q
-| ... | tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP
-| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and
+| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost and vpp \
+| ... | link bonding**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. \
+| ... | 802.1q tagging is applied on link between DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \
+| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \
 | ... | DUT2 and L2 cross- connect. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so
@@ -79,9 +84,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config.
+| | ... | - **[Cfg]** DUT runs L2XC switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
index 1a1fdd7..ca4c3fb 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -28,31 +28,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost and vpp
-| ... | link bonding*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1=DUT2-TG 3-node circular topology
-| ... | with single links between TG and DUT nodes and double link between DUT
-| ... | nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. 802.1q
-| ... | tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP
-| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost and vpp \
+| ... | link bonding**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1=DUT2-TG 3-node circular \
+| ... | topology with single links between TG and DUT nodes and double link \
+| ... | between DUT nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
+| ... | 802.1q tagging is applied on link between DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \
+| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \
 | ... | DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so
@@ -82,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index 141443d..bd2009c 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -28,31 +28,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost and vpp
-| ... | link bonding*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1=DUT2-TG 3-node circular topology
-| ... | with single links between TG and DUT nodes and double link between DUT
-| ... | nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. 802.1q
-| ... | tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP
-| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost and vpp \
+| ... | link bonding**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1=DUT2-TG 3-node circular \
+| ... | topology with single links between TG and DUT nodes and double link \
+| ... | between DUT nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
+| ... | 802.1q tagging is applied on link between DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \
+| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \
 | ... | DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so
@@ -82,9 +87,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
index 82fe9bd..375df7d 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -28,31 +28,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost and vpp
-| ... | link bonding*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1=DUT2-TG 3-node circular topology
-| ... | with single links between TG and DUT nodes and double link between DUT
-| ... | nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q
-| ... | tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP
-| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and
+| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost and vpp \
+| ... | link bonding**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1=DUT2-TG 3-node circular \
+| ... | topology with single links between TG and DUT nodes and double link \
+| ... | between DUT nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. \
+| ... | 802.1q tagging is applied on link between DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \
+| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \
 | ... | DUT2 and L2 cross- connect. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config.
+| | ... | - **[Cfg]** DUT runs L2XC switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index d110de8..4010bf9 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -28,31 +28,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost and vpp
-| ... | link bonding*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1=DUT2-TG 3-node circular topology
-| ... | with single links between TG and DUT nodes and double link between DUT
-| ... | nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q
-| ... | tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP
-| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and
+| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost and vpp \
+| ... | link bonding**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1=DUT2-TG 3-node circular \
+| ... | topology with single links between TG and DUT nodes and double link \
+| ... | between DUT nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. \
+| ... | 802.1q tagging is applied on link between DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \
+| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \
 | ... | DUT2 and L2 cross- connect. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so
@@ -80,9 +85,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config.
+| | ... | - **[Cfg]** DUT runs L2XC switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
index 94937b5..8a90650 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -27,30 +27,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q test
-| ... | cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\
-| ... | 802.1Q tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\
+| Documentation | **RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
+| ... | IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | bridge-\
 | ... | domain and MAC learning enabled. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are\
-| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\
-| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are \
+| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \
+| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -77,9 +83,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index e03e8cc..d427ba6 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -27,30 +27,36 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with vhost abd IEEE 802.1Q test
-| ... | cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\
-| ... | 802.1Q tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\
+| Documentation | **RFC2544: Pkt throughput L2BD with vhost abd IEEE 802.1Q \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
+| ... | IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 
+| ... | bridge-\
 | ... | domain and MAC learning enabled. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are\
-| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\
-| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are \
+| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \
+| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -77,9 +83,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
index 94633eb..517310d 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -27,28 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q
-| ... | tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
-| ... | connect. Qemu VNFs are \
+| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. \
+| ... | 802.1q tagging is applied on link between DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | cross-connect. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -73,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config.
+| | ... | - **[Cfg]** DUT runs L2XC switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index 981f37f..4246f14 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -27,28 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q
-| ... | tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
-| ... | connect. Qemu VNFs are \
+| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. \
+| ... | 802.1q tagging is applied on link between DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | cross-connect. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -73,9 +78,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config.
+| | ... | - **[Cfg]** DUT runs L2XC switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
index de9eb59..ce423cb 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -27,28 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
-| ... | domain and MAC learning enabled. Qemu VNFs are \
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | bridge-domain and MAC learning enabled. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index d7a1c09..837be6e 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -27,28 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
-| ... | domain and MAC learning enabled. Qemu VNFs are \
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 
+| ... | bridge-domain and MAC learning enabled. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
index 0534034..2d64a5e 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -27,27 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
-| ... | connect. Qemu VNFs are \
+| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | cross-connect. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config.
+| | ... | - **[Cfg]** DUT runs L2XC switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index 160a62a..49e1a8f 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -27,27 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
-| ... | connect. Qemu VNFs are \
+| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | cross-connect. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config.
+| | ... | - **[Cfg]** DUT runs L2XC switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot
index 7fe2b7d..e6e0028 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -27,27 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 test cases with vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| Documentation | **RFC2544: Pkt throughput IPv4 test cases with vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
 | ... | routing and two static IPv4 /24 route entries. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot
index b86a5cb..5a6f1e3 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot
@@ -27,27 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 test cases with vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| Documentation | **RFC2544: Pkt throughput IPv4 test cases with vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
 | ... | routing and two static IPv4 /24 route entries. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running VPP ip4 \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
index 325e33a..73e263a 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -27,29 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with VXLANoIPv4
-| ... | and vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with VXLANoIPv4. \
+| ... | and vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
 | ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
-| ... | domain and MAC learning enabled. Qemu VNFs are \
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | bridge-domain and MAC learning enabled. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -74,9 +79,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index 82262e9..e7bef37 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -27,29 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with VXLANoIPv4
-| ... | and vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with VXLANoIPv4. \
+| ... | and vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
 | ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
-| ... | domain and MAC learning enabled. Qemu VNFs are \
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
+| ... | bridge-domain and MAC learning enabled. Qemu VNFs are \
 | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -74,9 +79,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
index 8a87ebb..ce4b44e 100644 (file)
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -27,29 +27,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q test
-| ... | cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\
-| ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain and\
-| ... | MAC learning enabled. Qemu VNFs are connected to VPP via\
+| Documentation | **RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
+| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\
+| ... | domain and \
+| ... | MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running testpmd interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -76,9 +82,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index 7acc6c3..bc31668 100644 (file)
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -27,29 +27,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q test
-| ... | cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\
-| ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain and\
-| ... | MAC learning enabled. Qemu VNFs are connected to VPP via\
+| Documentation | **RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
+| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\
+| ... | domain and \
+| ... | MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP l2xc interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -76,9 +82,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot
index 7ce6d8a..08a12cb 100644 (file)
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot
@@ -27,29 +27,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q test
-| ... | cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\
-| ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain and\
-| ... | MAC learning enabled. Qemu VNFs are connected to VPP via\
+| Documentation | **RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
+| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\
+| ... | domain and \
+| ... | MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP l2xc interconnecting \
 | ... | virtio interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -76,9 +82,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
index 4589d91..e928115 100644 (file)
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -27,28 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC with vhost abd IEEE 802.1Q test
-| ... | cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect of IPv4.\
-| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross connect and\
-| ... | MAC learning enabled. Qemu VNFs are connected to VPP via\
+| Documentation | **RFC2544: Pkt throughput L2XC with vhost abd IEEE 802.1Q \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect \
+| ... | of IPv4. IEEE 802.1Q tagging is applied on link between DUT1-if2 \
+| ... | and TG-if2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross-\
+| ... | connect and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running testpmd interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows\
-| ... | per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static\ payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows \
+| ... | per flow-group) with all packets containing Ethernet header, IPv4. \
+| ... | header with IP protocol=61 and static \ payload. MAC addresses are \
 | ... | matching MAC addresses of NFs nodes interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -73,9 +79,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2XC switching with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2XC switching with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index c453242..69d006e 100644 (file)
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -27,28 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC with vhost abd IEEE 802.1Q test
-| ... | cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect of IPv4.\
-| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross connect and\
-| ... | MAC learning enabled. Qemu VNFs are connected to VPP via\
+| Documentation | **RFC2544: Pkt throughput L2XC with vhost abd IEEE 802.1Q \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect \
+| ... | of IPv4. IEEE 802.1Q tagging is applied on link between DUT1-if2 \
+| ... | and TG-if2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross-\
+| ... | connect and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP l2xc interconnecting \
 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows\
-| ... | per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static\ payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows \
+| ... | per flow-group) with all packets containing Ethernet header, IPv4. \
+| ... | header with IP protocol=61 and static \ payload. MAC addresses are \
 | ... | matching MAC addresses of NFs nodes interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -73,9 +79,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2XC switching with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2XC switching with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot
index b784c21..21457e0 100644 (file)
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2xcbase-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot
@@ -27,28 +27,34 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC with vhost abd IEEE 802.1Q test
-| ... | cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect of IPv4.\
-| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross connect and\
-| ... | MAC learning enabled. Qemu VNFs are connected to VPP via\
+| Documentation | **RFC2544: Pkt throughput L2XC with vhost abd IEEE 802.1Q \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect \
+| ... | of IPv4. IEEE 802.1Q tagging is applied on link between DUT1-if2 \
+| ... | and TG-if2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross-\
+| ... | connect and MAC learning enabled. Qemu VNFs are connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP l2xc interconnecting \
 | ... | virtio interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows\
-| ... | per flow-group) with all packets containing Ethernet header, IPv4\
-| ... | header with IP protocol=61 and static\ payload. MAC addresses are\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows \
+| ... | per flow-group) with all packets containing Ethernet header, IPv4. \
+| ... | header with IP protocol=61 and static \ payload. MAC addresses are \
 | ... | matching MAC addresses of NFs nodes interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -73,9 +79,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs L2XC switching with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** Each DUT runs L2XC switching with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
index d9f5174..ba9d427 100644 (file)
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -27,28 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
 | ... | domain and MAC learning enabled. Qemu VNFs are connected \
 | ... | to VPP via vhost-user interfaces. Guest is running testpmd \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is tested \
 | ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index 2d5d265..f9e6a46 100644 (file)
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -27,28 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
 | ... | domain and MAC learning enabled. Qemu VNFs are connected \
 | ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is tested \
 | ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot
index f35825f..dbfc497 100644 (file)
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot
@@ -27,28 +27,33 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
 | ... | domain and MAC learning enabled. Qemu VNFs are connected \
 | ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \
 | ... | interconnecting virtio interfaces, rxd/txd=1024. DUT1 is tested \
 | ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 254 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -71,9 +76,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
index 2a65377..86eb66f 100644 (file)
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -27,27 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross- \
 | ... | connect. Qemu VNFs are connected \
 | ... | to VPP via vhost-user interfaces. Guest is running testpmd \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is tested \
 | ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config.
+| | ... | - **[Cfg]** DUT runs L2XC switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index 495b9f1..6cf645b 100644 (file)
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -27,27 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross- \
 | ... | connect. Qemu VNFs are connected \
 | ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is tested \
 | ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config.
+| | ... | - **[Cfg]** DUT runs L2XC switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot
index e941178..6a88569 100644 (file)
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr.robot
@@ -27,26 +27,31 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-
-| ... | connect. Qemu VNFs are connected to VPP via vhost-user interfaces \
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross- \
+| ... | connect. Qemu VNFs are connected to VPP via vhost-user interfaces. \
 | ... | Guest is running VPP l2xc interconnecting virtio interfaces, \
 | ... | rxd/txd=1024. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -69,9 +74,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config.
+| | ... | - **[Cfg]** DUT runs L2XC switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot
index 02be463..1350d99 100644 (file)
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -27,27 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 test cases with vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 test cases with vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
 | ... | routing and two static IPv4 /24 route entries. Qemu VNFs are connected \
 | ... | to VPP via vhost-user interfaces. Guest is running testpmd \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is tested \
 | ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot
index a3656ab..b5233be 100644 (file)
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot
@@ -27,27 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 test cases with vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 test cases with vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
 | ... | routing and two static IPv4 /24 route entries. Qemu VNFs are connected \
 | ... | to VPP via vhost-user interfaces. Guest is running VPP ip4 \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is tested \
 | ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2virtiovr1024-1vm-vppip4-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2virtiovr1024-1vm-vppip4-ndrpdr.robot
index 2d69774..4ca2980 100644 (file)
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2virtiovr1024-1vm-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2virtiovr1024-1vm-vppip4-ndrpdr.robot
@@ -27,27 +27,32 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput IPv4 test cases with vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Pkt throughput IPv4 test cases with vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
 | ... | routing and two static IPv4 /24 route entries. Qemu VNFs are connected \
 | ... | to VPP via vhost-user interfaces. Guest is running VPP ip4 \
 | ... | interconnecting virtio interfaces, rxd/txd=1024. DUT1 is tested \
 | ... | with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MA\C
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -70,9 +75,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).

diff --git a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot
index 355daf8..6072b53 100644 (file)
--- a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot
@@ -27,30 +27,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4
-| ... | and vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Packet throughput L2BD test cases with \
+| ... | VXLANoIPv4 and vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
 | ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link from/to TG.
-| ... | *[Cfg] DUT configuration:* DUTs are configured with L2 bridge-
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUTs are configured with L2 bridge- \
 | ... | domain and MAC learning enabled. Qemu VNFs are connected \
 | ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUTs are \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -75,9 +80,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - L2 Frame Size [B]. Type: integer

diff --git a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot
index 68053e1..a38d5b8 100644 (file)
--- a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot
@@ -27,30 +27,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4
-| ... | and vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Packet throughput L2BD test cases with \
+| ... | VXLANoIPv4 and vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
 | ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link from/to TG.
-| ... | *[Cfg] DUT configuration:* DUTs are configured with L2 bridge-
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUTs are configured with L2 bridge- \
 | ... | domain and MAC learning enabled. Qemu VNFs are connected \
 | ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUTs are \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
@@ -75,9 +80,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - L2 Frame Size [B]. Type: integer

diff --git a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot
index 0cb40df..c62b53a 100644 (file)
--- a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot
@@ -27,30 +27,35 @@
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4
-| ... | and vhost*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| Documentation | **RFC2544: Packet throughput L2BD test cases with \
+| ... | VXLANoIPv4 and vhost**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
 | ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link from/to TG.
-| ... | *[Cfg] DUT configuration:* DUTs are configured with L2 bridge-
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUTs are configured with L2 bridge- \
 | ... | domain and MAC learning enabled. Qemu VNFs are connected \
 | ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUTs are \
 | ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
 | ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
@@ -75,9 +80,9 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
+| | ... | - **[Cfg]** DUT runs L2BD switching config. \
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - L2 Frame Size [B]. Type: integer